Mass move of uncompiled packages to abs_not_built.

The will sit here for a bit, and then will be removed completely if no one claims them.

6 files changed, 860 insertions, 0 deletions

diff --git a/abs/not_built/core/linhes-live/etc/live-shutdown b/abs/not_built/core/linhes-live/etc/live-shutdown
new file mode 100644
index 0000000..b6a8378
--- /dev/null
+++ b/abs/not_built/core/linhes-live/etc/live-shutdown
@@ -0,0 +1,90 @@
+# Functions used by rc.shutdown
+# Modified versions for linhes live systems
+
+f_saveclock ()
+{
+    :
+}
+
+f_swapoff ()
+{
+    ############################# Include session saving functions
+#    . /opt/linhes-live/session-save/shutdown2
+#    if [ -f /tmp/checkse ]; then
+#        . /tmp/checkse
+#    else
+#        checkse
+#    fi
+
+    if [ -n "${saving}" ] && ! session_save; then
+        echo
+        echo "If you know what you are doing, you may be able to recover"
+        echo "something from this unpleasant situation."
+        echo
+        echo "You may use the command line to investigate further ..."
+        echo
+        echo "When finished please enter 'exit', the shutdown process will"
+        echo "then continue."
+        sh -i
+    fi
+
+    #############################
+
+    stat_busy "Deactivating Swap"
+    /sbin/swapoff -a
+    stat_done
+}
+
+f_remountro ()
+{
+    bootdev=`cat /.livesys/bootdevice`
+    echo "Boot device was $bootdev"
+    #bootdev=`basename $bootdev`
+    for i in `ls  /dev/cd/*`
+    do
+        cdrom=`readlink -f $i`
+        if [ x$cdrom = x$bootdev ]
+        then
+            ejectdev=$cdrom
+	    break
+        fi
+        
+    done
+    lspci |grep -q VMware
+    if [ !   $? = 0 ]
+    then
+        if [ -n "${ejectdev}" ]
+        then
+            echo "Ejecting CD $ejectdev"
+            eject ${ejectdev}
+            echo "========================================"
+            echo "Tray will retract after 10 seconds"
+            for timer in `seq -w 10 -1 0`
+            do
+                #echo -n  $timer '\x08'
+                echo -ne   "\t"$timer '\010\010\010\010'
+                sleep 1
+            done
+            echo
+            echo "========================================"
+            eject -t ${ejectdev}
+            echo
+            echo "It's safe to switch the computer off now"
+            #echo -ne "Press Enter to continue"
+            #read junk
+        else
+            echo "Boot device is not a cdrom, no need to eject"
+        fi
+    else
+        echo "VMWARE detected, not ejecting the CD"
+    fi
+}
+#Preloads these commands so we can eject the CD.
+#
+seq --help >/dev/null 2>&1
+eject --help >/dev/null 2>&1
+halt --help >/dev/null 2>&1
+poweroff --help >/dev/null 2>&1
+reboot --help >/dev/null 2>&1
+
+# End
diff --git a/abs/not_built/core/linhes-live/etc/live-sysinit b/abs/not_built/core/linhes-live/etc/live-sysinit
new file mode 100644
index 0000000..40edad9
--- /dev/null
+++ b/abs/not_built/core/linhes-live/etc/live-sysinit
@@ -0,0 +1,73 @@
+# Functions used by rc.sysinit
+# Modified versions for linhes live systems
+
+f_header ()
+{
+    cR='\e[31m' cY='\e[1;33m'  cN='\e[0m'  cW='\e[1;37m'
+    echo " "
+    printsep
+    printf "   ${cR}LinHes ${cY}Installation${cN}/${cY}Live${cW} CDROM${cN}. "
+    printsep
+    echo " "
+}
+
+f_fscheck ()
+{
+    stat_busy "Initializing /etc/mtab"
+    #/bin/mount -n -o remount,rw /
+
+    /bin/rm -f /etc/mtab*
+
+    # Make entries for aufs/unionfs, tmpfs and live medium in /etc/mtab
+    grep "^aufs */ " /proc/mounts >>/etc/mtab
+    grep "^unionfs */ " /proc/mounts >>/etc/mtab
+    grep "^tmpfs */.livesys " /proc/mounts >>/etc/mtab
+    if [ -d /.livesys/medium/live ]; then
+        grep " /.livesys/medium " /proc/mounts >>/etc/mtab
+    fi
+
+    f_mountlocal
+    stat_done
+
+    if [ -z "$( cat /etc/fstab | grep "^#KEEP" )" ]; then
+        stat_busy "Generating fresh /etc/fstab"
+        /opt/linhes-live/bin/gen_fstab -l
+        stat_done
+    fi
+
+    # now mount all the local filesystems
+    stat_busy "Mounting Local Filesystems"
+    /bin/mount -a -t $NETFS
+    stat_done
+}
+
+f_swapon ()
+{
+    #+*** Copy session-save flag-file (if it exists)
+    [ -f /live/nosave ] && cp /live/nosave /.livesys
+    #-***
+
+    #*** Conditional swap activation
+    if [ -e /.livesys/swapon ]; then
+        status "Activating Swap" /sbin/swapon -a
+    fi
+}
+f_loadmodules()
+{
+    CMDLINE=$(cat /proc/cmdline)
+    echo $CMDLINE | grep -q modules
+    if [ $? -eq 0 ]
+    then
+        TEMPVAR=${CMDLINE#* modules=}
+        CMDMODULES=${TEMPVAR%% *}
+        mymod=`echo $CMDMODULES|/bin/sed 's|-|_|g' |/bin/sed 's|,| |g'`
+        stat_busy "Loading CMD module"
+        for mod in $mymod
+        do
+              /sbin/modprobe $mod
+        done
+        stat_done
+    fi
+
+
+}
diff --git a/abs/not_built/core/linhes-live/etc/loginroot b/abs/not_built/core/linhes-live/etc/loginroot
new file mode 100755
index 0000000..e3153c6
--- /dev/null
+++ b/abs/not_built/core/linhes-live/etc/loginroot
@@ -0,0 +1,3 @@
+#! /bin/sh
+login -f root
+# End
diff --git a/abs/not_built/core/linhes-live/etc/rc.shutdown-live b/abs/not_built/core/linhes-live/etc/rc.shutdown-live
new file mode 100755
index 0000000..79eae47
--- /dev/null
+++ b/abs/not_built/core/linhes-live/etc/rc.shutdown-live
@@ -0,0 +1,168 @@
+#!/bin/bash
+#
+# /etc/rc.shutdown
+#
+
+###
+# Based on initscripts 2008.05-1
+###
+
+. /etc/rc.conf
+. /etc/rc.d/functions
+
+###############################################################
+### These functions have been separated out, so that they can be
+### replaced in linhes live systems.
+
+f_saveclock ()
+{
+    stat_busy "Saving System Clock"
+    if [ "$TIMEZONE" != "" -a -e "/usr/share/zoneinfo/$TIMEZONE" ]; then
+        /bin/rm -f /etc/localtime
+        /bin/cp "/usr/share/zoneinfo/$TIMEZONE" /etc/localtime
+    fi
+
+    HWCLOCK_PARAMS="--systohc"
+    if [ "$HARDWARECLOCK" = "UTC" ]; then
+        HWCLOCK_PARAMS="$HWCLOCK_PARAMS --utc"
+    else
+        HWCLOCK_PARAMS="$HWCLOCK_PARAMS --localtime"
+    fi
+    if [ "$USEDIRECTISA" = "yes" -o "$USEDIRECTISA" = "YES" ]; then
+        HWCLOCK_PARAMS="$HWCLOCK_PARAMS --directisa"
+    fi
+    /sbin/hwclock $HWCLOCK_PARAMS
+    stat_done
+}
+
+f_swapoff ()
+{
+    stat_busy "Deactivating Swap"
+    /sbin/swapoff -a
+    stat_done
+}
+
+f_remountro ()
+{
+    stat_busy "Remounting Root Filesystem Read-only"
+    /bin/mount -n -o remount,ro /
+    stat_done
+}
+
+###############################################################
+
+### Override above functions if running linhes live system
+[ -f /etc/live-shutdown ] && . /etc/live-shutdown
+
+# avoid staircase effect
+/bin/stty onlcr
+
+echo " "
+printhl "Initiating Shutdown..."
+echo " "
+
+# avoid NIS hanging syslog-ng on shutdown by unsetting the domainname
+if [ -x /bin/domainname ]; then
+    /bin/domainname ""
+fi
+
+if [ -x /etc/rc.local.shutdown ]; then
+    /etc/rc.local.shutdown
+fi
+
+if [ "$PREVLEVEL" = "3" -o "$PREVLEVEL" = "5" ]; then
+    # Shutdown daemons
+    let i=${#DAEMONS[@]}
+    while [ $i -ge 0 ]; do
+        if [ "${DAEMONS[$i]:0:1}" != '!' ]; then
+            ck_daemon ${DAEMONS[$i]#@} || /etc/rc.d/${DAEMONS[$i]#@} stop
+        fi
+        let i=i-1
+    done
+    # find any leftover daemons and shut them down in reverse order
+    if [ -d /var/run/daemons ]; then
+        for daemon in $(/bin/ls -1t /var/run/daemons); do
+            /etc/rc.d/$daemon stop
+        done
+    fi
+fi
+
+# Terminate all processes
+stat_busy "Sending SIGTERM To Processes"
+/sbin/killall5 -15 &> /dev/null
+/bin/sleep 5
+stat_done
+
+stat_busy "Sending SIGKILL To Processes"
+/sbin/killall5 -9 &> /dev/null
+/bin/sleep 1
+stat_done
+
+stat_busy "Saving Random Seed"
+/bin/dd if=/dev/urandom of=/var/run/random-seed count=1 bs=512 2> /dev/null
+stat_done
+
+#F Save system time
+f_saveclock
+
+# removing psmouse module to fix some reboot issues on newer laptops
+/sbin/modprobe -r psmouse >/dev/null 2>&1
+
+# Write to wtmp file before unmounting
+/sbin/halt -w
+
+#F Deactivate swaps
+f_swapoff
+
+stat_busy "Unmounting Filesystems"
+/bin/umount -a -t noramfs,notmpfs,nosysfs,noproc
+stat_done
+
+# Kill non-root encrypted partition mappings
+if [ -f /etc/crypttab -a -n "$(/bin/grep -v ^# /etc/crypttab | /bin/grep -v ^$)" ]; then
+    stat_busy "Deactivating encrypted volumes:"
+    CS=/sbin/cryptsetup.static
+    do_uncrypt() {
+        if [ $# -ge 3 ]; then
+            stat_append "${1}.."
+            $CS remove $1 >/dev/null 2>&1
+            if [ $? -ne 0 ]; then
+                stat_append "failed "
+            else
+                stat_append "ok "
+            fi
+        fi
+    }
+    while read line; do
+        eval do_uncrypt "$line"
+    done </etc/crypttab
+    stat_done
+fi
+
+if [ "$USELVM" = "yes" -o "$USELVM" = "YES" ]; then
+    if [ -x /sbin/lvm -a -d /sys/block ]; then
+        stat_busy "Deactivating LVM2 groups"
+        /sbin/lvm vgchange --ignorelockingfailure -an >/dev/null 2>&1
+        stat_done
+    fi
+fi
+
+#F Remount / ro
+f_remountro
+#Eject the CD
+
+# Power off or reboot
+if [ "$RUNLEVEL" = "0" ]; then
+    printsep
+    printhl "${C_H2}POWER OFF"
+    /sbin/poweroff -d -f -h -i
+else
+    printsep
+    printhl "${C_H2}REBOOTING"
+    # if kexec is installed and a kernel is loaded, use it
+    [ -x /sbin/kexec ] && /sbin/kexec -e > /dev/null 2>&1
+    /sbin/reboot -d -f -i
+fi
+
+# vim: set ts=2 sw=2 noet:
+# End
diff --git a/abs/not_built/core/linhes-live/etc/rc.sysinit-live b/abs/not_built/core/linhes-live/etc/rc.sysinit-live
new file mode 100755
index 0000000..afdc2ae
--- /dev/null
+++ b/abs/not_built/core/linhes-live/etc/rc.sysinit-live
@@ -0,0 +1,469 @@
+#!/bin/bash
+#
+# /etc/rc.sysinit
+#
+
+###
+# Based on initscripts 2008.05-1
+###
+
+. /etc/rc.conf
+. /etc/rc.d/functions
+
+###############################################################
+### These functions have been separated out, so that they can be
+### replaced in linhes live systems.
+
+f_header ()
+{
+    echo " "
+    printhl "Arch Linux $C_OTHER(${C_H2}Core Dump$C_OTHER)\n"
+    printhl "${C_H2}http://www.archlinux.org"
+    printhl "Copyright 2002-2007 Judd Vinet"
+    printhl "Copyright 2007-2008 Aaron Griffin"
+    printhl "Distributed under the GNU General Public License (GPL)"
+    printsep
+}
+
+f_fscheck ()
+{
+    status "Mounting Root Read-only" /bin/mount -n -o remount,ro /
+
+    if [ -x /sbin/fsck ]; then
+        stat_busy "Checking Filesystems"
+        if /bin/grep -qw quiet /proc/cmdline; then
+            /sbin/fsck -A -T -C -a -t $NETFS $FORCEFSCK >/dev/null 2>&1
+        else
+            /sbin/fsck -A -T -C -a -t $NETFS $FORCEFSCK 2>/dev/null
+        fi
+        fsckret=$?
+        if [ ${fsckret} -gt 1 ]; then
+            stat_fail
+            if [ $((${fsckret}&2)) -eq 2 ]; then
+                echo
+                echo "********************** REBOOT REQUIRED *********************"
+                echo "*                                                          *"
+                echo "* The system will be rebooted automatically in 15 seconds. *"
+                echo "*                                                          *"
+                echo "************************************************************"
+                echo
+                /bin/sleep 15
+            else
+                echo
+                echo "*****************  FILESYSTEM CHECK FAILED  ****************"
+                echo "*                                                          *"
+                echo "*  Please repair manually and reboot. Note that the root   *"
+                echo "*  file system is currently mounted read-only. To remount  *"
+                echo "*  it read-write type: mount -n -o remount,rw /            *"
+                echo "*  When you exit the maintenance shell the system will     *"
+                echo "*  reboot automatically.                                   *"
+                echo "*                                                          *"
+                echo "************************************************************"
+                echo
+                /sbin/sulogin -p
+            fi
+            echo "Automatic reboot in progress..."
+            /bin/umount -a
+            /bin/mount -n -o remount,ro /
+            /sbin/reboot -f
+            exit 0
+        fi
+        stat_done
+    fi
+
+    stat_busy "Mounting Local Filesystems"
+    /bin/mount -n -o remount,rw /
+    /bin/rm -f /etc/mtab*
+    # make sure / gets written to /etc/mtab
+    /bin/mount -o remount,rw /
+
+    f_mountlocal
+    stat_done
+}
+
+f_mountlocal ()
+{
+    # Write /proc, /sys and /dev to /etc/mtab
+    if [ -e /proc/mounts ]; then
+        /bin/grep -e "/proc " -e "/sys " -e "/dev " /proc/mounts >> /etc/mtab
+    fi
+    # now mount all the local filesystems
+    /bin/mount -a -t $NETFS
+}
+
+f_swapon ()
+{
+    status "Activating Swap" /sbin/swapon -a
+}
+
+###############################################################
+
+### Override above functions if running linhes live system
+[ -f /etc/live-sysinit ] && . /etc/live-sysinit
+
+#F Print header
+f_header
+
+# mount /proc, /sys and our RAM /dev
+/bin/mount -n -t ramfs none /dev
+/bin/mount -n -t proc none /proc
+/bin/mount -n -t sysfs none /sys
+
+# Create our default nodes that minilogd may need
+/bin/mknod /dev/null c 1 3
+/bin/mknod /dev/zero c 1 5
+/bin/mknod /dev/console c 5 1
+
+# More initial /dev setup that udev doesn't do
+/bin/ln -snf /proc/self/fd /dev/fd
+/bin/ln -snf /proc/self/fd/0 /dev/stdin
+/bin/ln -snf /proc/self/fd/1 /dev/stdout
+/bin/ln -snf /proc/self/fd/2 /dev/stderr
+/bin/ln -snf /proc/kcore /dev/core
+/bin/mkdir /dev/pts
+/bin/mkdir /dev/shm
+
+# start up our mini logger until syslog takes over
+/sbin/minilogd
+
+# anything more serious than KERN_WARNING goes to the console
+# 'verbose' cmdline parameter enables more messages
+if /bin/grep -q " verbose" /proc/cmdline; then
+    /bin/dmesg -n 8
+else
+    /bin/dmesg -n 3
+fi
+
+# enable rtc access
+/sbin/modprobe rtc-cmos >/dev/null 2>&1
+RTC_MAJOR=$(/bin/grep -w rtc /proc/devices 2>/dev/null); RTC_MAJOR="${RTC_MAJOR%% *}"
+if [ -n "$RTC_MAJOR" ]; then
+    /bin/mkdir /dev/misc/
+    /bin/mknod /dev/misc/rtc0 c $RTC_MAJOR 0
+    /bin/ln -s /dev/misc/rtc0 /dev/rtc
+fi
+
+HWCLOCK_PARAMS="--hctosys"
+if [ "$HARDWARECLOCK" = "UTC" ]; then
+    HWCLOCK_PARAMS="$HWCLOCK_PARAMS --utc"
+else
+    HWCLOCK_PARAMS="$HWCLOCK_PARAMS --localtime"
+fi
+if [ "$USEDIRECTISA" = "yes" -o "$USEDIRECTISA" = "YES" ]; then
+    HWCLOCK_PARAMS="$HWCLOCK_PARAMS --directisa"
+fi
+
+# Set clock early to fix some bugs with filesystem checks
+# Clock is set again later to match rc.conf
+if [ -f /etc/localtime ]; then
+    /sbin/hwclock $HWCLOCK_PARAMS --noadjfile
+fi
+
+echo > /proc/sys/kernel/hotplug
+
+if [ -x /sbin/udevadm -a -d /sys/block ]; then
+    # We have udev and /sys appears to be mounted, use UDev
+    #status "Starting UDev Daemon" /etc/start_udev init
+
+    stat_busy "Starting UDev Daemon"
+    /sbin/udevd --daemon
+    stat_done
+else
+    # Static /dev, our last resort
+    status "Using static /dev filesystem" true
+fi
+
+# Load modules from the MODULES array defined in rc.conf
+if ! [ "$load_modules" = "off" ]; then
+    if [ -f /proc/modules ]; then
+############Added by jm to load modules from /proc/cmdline
+	f_loadmodules
+##############
+        stat_busy "Loading Modules"
+        for mod in "${MODULES[@]}"; do
+            if [ "$mod" = "${mod#!}" ]; then
+                /sbin/modprobe $mod
+            fi
+        done
+        stat_done
+    fi
+    if [ -d /proc/acpi ]; then
+        stat_busy "Loading standard ACPI modules"
+        ACPI_MODULES="ac battery button fan processor thermal"
+        k="$(echo $BLACKLIST ${MOD_BLACKLIST[@]} | /bin/sed 's|-|_|g')"
+        j="$(echo ${MODULES[@]} | /bin/sed 's|-|_|g')"
+        #add disabled MODULES (!) to blacklist - much requested feature
+        for m in ${j}; do
+                [ "$m" != "${m#!}" ] && k="${k} ${m#!}"
+        done
+        # add disablemodules= from commandline to blacklist
+        k="${k} $(echo ${disablemodules} | /bin/sed 's|-|_|g' | /bin/sed 's|,| |g')"
+        for n in ${ACPI_MODULES}; do
+            if ! echo ${k} | /bin/grep "\<$n\>" 2>&1 >/dev/null; then
+                /sbin/modprobe $n > /dev/null 2>&1
+            fi
+        done
+        stat_done
+    fi
+fi
+
+# run udev uevents
+if /bin/pidof -o %PPID /sbin/udevd >/dev/null; then
+    #status "Loading UDev uevents" /etc/start_udev uevents
+    stat_busy "Loading UDev uevents"
+    udevstart="$(/bin/date +%s%0N)"
+    /sbin/udevadm trigger
+    /sbin/udevadm settle
+    stat_done
+    udevend="$(/bin/date +%s%0N)"
+    printhl "   UDev uevent processing time: $((($udevend-$udevstart)/1000000))ms"
+fi
+
+# bring up the loopback interface
+if [ -d /sys/class/net/lo ]; then
+    stat_busy "Bringing up loopback interface"
+    /sbin/ifconfig lo 127.0.0.1 up
+    if [ $? -ne 0 ]; then
+        stat_fail
+    else
+        stat_done
+    fi
+fi
+
+# If necessary, find md devices and manually assemble RAID arrays
+if [ -f /etc/mdadm.conf -a "$(/bin/grep ^ARRAY /etc/mdadm.conf 2>/dev/null)" ]; then
+    # udev won't create these md nodes, so we do it ourselves
+    for dev in $(/bin/grep ^ARRAY /etc/mdadm.conf | /bin/awk '{print $2}'); do
+        path=$(echo $dev | /bin/sed 's|/[^/]*$||')
+        node=$(echo $dev | /bin/sed "s|^$path/||")
+        minor=$(echo $node | /bin/sed 's|^[^0-9]*||')
+        [ ! -e $path/$node ] && /bin/mknod $path/$node b 9 $minor
+    done
+    status "Activating RAID arrays" /sbin/mdadm --assemble --scan
+fi
+
+if [ "$USELVM" = "yes" -o "$USELVM" = "YES" ]; then
+    if [ -x /sbin/lvm -a -d /sys/block ]; then
+        # Kernel 2.6.x, LVM2 groups
+        /sbin/modprobe -q dm-mod 2>/dev/null
+        stat_busy "Activating LVM2 groups"
+        /sbin/lvm vgscan --ignorelockingfailure --mknodes >/dev/null
+        /sbin/lvm vgchange --ignorelockingfailure -a y >/dev/null
+        if [ $? -ne 0 ]; then
+            stat_fail
+        else
+            stat_done
+        fi
+    fi
+fi
+
+# Set up non-root encrypted partition mappings
+if [ -f /etc/crypttab -a -n "$(/bin/grep -v ^# /etc/crypttab | /bin/grep -v ^$)" ]; then
+    /sbin/modprobe -q dm-mod 2>/dev/null
+    stat_busy "Unlocking encrypted volumes:"
+    csfailed=0
+    CS=/sbin/cryptsetup.static
+    do_crypt() {
+        if [ $# -ge 3 ]; then
+            cname="$1"
+            csrc="$2"
+            cpass="$3"
+            shift 3
+            copts="$*"
+            stat_append "${cname}.."
+            # For some fun reason, the parameter ordering varies for
+            # LUKS and non-LUKS devices.  Joy.
+            if [ "${cpass}" = "SWAP" ]; then
+                # This is DANGEROUS! The only possible safety check
+                # is to not proceed in case we find a LUKS device
+                # This may cause dataloss if it is not used carefully
+                if $CS isLuks $csrc 2>/dev/null; then
+                    false
+                else
+                    $CS -d /dev/urandom $copts create $cname $csrc >/dev/null
+                    if [ $? -eq 0 ]; then
+                        stat_append "creating swapspace.."
+                        /sbin/mkswap -L $cname /dev/mapper/$cname >/dev/null
+                    fi
+                fi
+            elif [ "${cpass}" = "ASK" ]; then
+                printf "\nOpening '${cname}' volume:\n"
+
+                if $CS isLuks $csrc 2>/dev/null; then
+                    $CS $copts luksOpen $csrc $cname < /dev/console
+                else
+                    $CS $copts create $cname $csrc < /dev/console
+                fi
+            elif [ "${cpass:0:1}" != "/" ]; then
+                if $CS isLuks $csrc 2>/dev/null; then
+                    echo "$cpass" | $CS $copts luksOpen $csrc $cname >/dev/null
+                else
+                    echo "$cpass" | $CS $copts create $cname $csrc >/dev/null
+                fi
+            else
+                if $CS isLuks $csrc 2>/dev/null; then
+                    $CS -d $cpass $copts luksOpen $csrc $cname >/dev/null
+                else
+                    $CS -d $cpass $copts create $cname $csrc >/dev/null
+                fi
+            fi
+            if [ $? -ne 0 ]; then
+                csfailed=1
+                stat_append "failed "
+            else
+                stat_append "ok "
+            fi
+        fi
+    }
+    while read line; do
+        eval do_crypt "$line"
+    done </etc/crypttab
+    if [ $csfailed -eq 0 ]; then
+        stat_done
+    else
+        stat_fail
+    fi
+    # Maybe someone has LVM on an encrypted block device
+    if [ "$USELVM" = "yes" -o "$USELVM" = "YES" ]; then
+        if [ -x /sbin/lvm -a -d /sys/block ]; then
+            /sbin/lvm vgscan --ignorelockingfailure --mknodes >/dev/null
+            /sbin/lvm vgchange --ignorelockingfailure -a y >/dev/null
+        fi
+    fi
+fi
+
+FORCEFSCK=
+[ -f /forcefsck ] && FORCEFSCK="-- -f"
+NETFS="nonfs,nonfs4,nosmbfs,nocifs,nocodafs,noncpfs,nosysfs,noshfs,nofuse,nofuseblk"
+
+#F Check filesystems
+f_fscheck
+
+#F Activate swaps
+f_swapon
+
+stat_busy "Configuring System Clock"
+if [ ! -f /var/lib/hwclock/adjtime ]; then
+    echo "0.0 0 0.0" > /var/lib/hwclock/adjtime
+fi
+if [ "$TIMEZONE" != "" -a -e "/usr/share/zoneinfo/$TIMEZONE" ]; then
+    /bin/rm -f /etc/localtime
+    /bin/cp "/usr/share/zoneinfo/$TIMEZONE" /etc/localtime
+fi
+
+/sbin/hwclock $HWCLOCK_PARAMS
+stat_done
+
+if [ -f /var/run/random-seed ]; then
+    stat_busy "Initializing Random Seed"
+    /bin/cat /var/run/random-seed >/dev/urandom
+    stat_done
+fi
+
+stat_busy "Removing Leftover Files"
+/bin/rm -f /etc/nologin &>/dev/null
+/bin/rm -f /etc/shutdownpid &>/dev/null
+/bin/rm -f /var/lock/* &>/dev/null
+/bin/rm -rf /tmp/* /tmp/.* &>/dev/null
+/bin/rm -f /forcefsck &>/dev/null
+(cd /var/run && /usr/bin/find . ! -type d -exec /bin/rm -f -- {} \; )
+: > /var/run/utmp
+# Keep {x,k,g}dm happy with xorg
+/bin/mkdir /tmp/.ICE-unix && /bin/chmod 1777 /tmp/.ICE-unix
+/bin/mkdir /tmp/.X11-unix && /bin/chmod 1777 /tmp/.X11-unix
+stat_done
+
+#status "Updating Shared Library Links" /sbin/ldconfig
+
+if [ "$HOSTNAME" != "" ]; then
+    status "Setting Hostname: $HOSTNAME" /bin/hostname $HOSTNAME
+fi
+
+# Set the NIS domain name, if necessary
+[ -f /etc/conf.d/nisdomainname ] && . /etc/conf.d/nisdomainname
+if [ "$NISDOMAINNAME" != "" ]; then
+    status "Setting NIS Domain Name: $NISDOMAINNAME" /bin/nisdomainname $NISDOMAINNAME
+fi
+
+status "Updating Module Dependencies" /sbin/depmod -A
+
+# Flush old locale settings
+: >/etc/profile.d/locale.sh
+/bin/chmod 755 /etc/profile.d/locale.sh
+# Set user defined locale
+[ -z "$LOCALE" ] && LOCALE="en_US"
+stat_busy "Setting Locale: $LOCALE"
+echo "export LANG=$LOCALE" >>/etc/profile.d/locale.sh
+stat_done
+
+if echo "$LOCALE" | /bin/grep -qi utf ; then
+    stat_busy "Setting Consoles to UTF-8 mode"
+    # UTF-8 consoles are default since 2.6.24 kernel
+    # this code is needed not only for older kernels,
+    # but also when user has set vt.default_utf8=0 but LOCALE is *.UTF-8.
+    /usr/bin/kbd_mode -u
+    for i in $(/usr/bin/seq 0 63); do
+        printf "\e%%G" > /dev/vc/${i}
+    done
+    # the $CONSOLE check helps us avoid this when running scripts from cron
+    echo 'if [ "$CONSOLE" = "" -a "$TERM" = "linux" -a -t 1 ]; then printf "\e%%G"; fi' >>/etc/profile.d/locale.sh
+    stat_done
+    [ -n "$KEYMAP" ] && status "Loading Keyboard Map: $KEYMAP" /bin/loadkeys -q -u $KEYMAP
+else
+    stat_busy "Setting Consoles to legacy mode"
+    # make non-UTF-8 consoles work on 2.6.24 and newer kernels
+    /usr/bin/kbd_mode -a
+    for i in $(/usr/bin/seq 0 63); do
+        printf "\e%%@" > /dev/vc/${i}
+    done
+    # the $CONSOLE check helps us avoid this when running scripts from cron
+    echo 'if [ "$CONSOLE" = "" -a "$TERM" = "linux" -a -t 1 ]; then printf "\e%%@"; fi' >>/etc/profile.d/locale.sh
+    stat_done
+    [ -n "$KEYMAP" ] && status "Loading Keyboard Map: $KEYMAP" /bin/loadkeys -q $KEYMAP
+fi
+
+if [ -n "$CONSOLEFONT" ]; then
+    stat_busy "Loading Console Font: $CONSOLEFONT"
+    #CONSOLEMAP in UTF-8 shouldn't be used
+    if [ -n "$CONSOLEMAP" ] && echo "$LOCALE" | /bin/grep -qi utf ; then
+        CONSOLEMAP=""
+    fi
+    for i in $(/usr/bin/seq 0 63); do
+        if [ -n "$CONSOLEMAP" ]; then
+            /usr/bin/setfont -m $CONSOLEMAP $CONSOLEFONT -C /dev/vc/${i} >/dev/null 2>&1
+        else
+            /usr/bin/setfont $CONSOLEFONT -C /dev/vc/${i} >/dev/null 2>&1
+        fi
+    done
+    if [ $? -ne 0 ]; then
+        stat_fail
+    else
+        for i in $(/usr/bin/seq 0 63); do
+            printf "\e(K" > /dev/vc/${i}
+        done
+        # the $CONSOLE check helps us avoid this when running scripts from cron
+        echo 'if [ "$CONSOLE" = "" -a "$TERM" = "linux" -a -t 1 ]; then printf "\e(K"; fi' >>/etc/profile.d/locale.sh
+        stat_done
+    fi
+fi
+
+# Adding persistent network/cdrom generated rules
+if [ -f "/dev/.udev/tmp-rules--70-persistent-cd.rules" ]; then
+    stat_busy "Adding persistent cdrom udev rules"
+    /bin/cat /dev/.udev/tmp-rules--70-persistent-cd.rules >> /etc/udev/rules.d/70-persistent-cd.rules
+    stat_done
+fi
+if [ -f "/dev/.udev/tmp-rules--70-persistent-net.rules" ]; then
+    stat_busy "Adding persistent network udev rules"
+    /bin/cat /dev/.udev/tmp-rules--70-persistent-net.rules >> /etc/udev/rules.d/70-persistent-net.rules
+    stat_done
+fi
+
+# Save our dmesg output from this boot
+if [ -f /var/log/dmesg.log ]; then
+    /bin/rm /var/log/dmesg.log
+fi
+/bin/dmesg > /var/log/dmesg.log
+
+# vim: set ts=2 noet:
+# End
diff --git a/abs/not_built/core/linhes-live/etc/ulogin b/abs/not_built/core/linhes-live/etc/ulogin
new file mode 100755
index 0000000..085c431
--- /dev/null
+++ b/abs/not_built/core/linhes-live/etc/ulogin
@@ -0,0 +1,57 @@
+#!/bin/bash
+
+# ulogin  - A script for autologin of a selected user (and more)
+#-----------------------------------------------------------------
+# 2008.04.06
+
+user=$( cat /tmp/newuser 2>/dev/null )
+
+rm -f /tmp/newuser
+rm -f /tmp/xlogout
+
+if [ -n "${user}" ]; then
+    login -f ${user}
+else
+    # offer choice of user
+    ulist="$( cat /etc/passwd | grep ':/home/.*sh$' )"
+    echo -e "\nLogin a user or quit:"
+    echo "   0 : root"
+    echo "   1 : REBOOT"
+    echo "   2 : HALT"
+
+    i=2
+    for entry in ${ulist}; do
+        i=$(( ${i} + 1 ))
+        user="$( echo ${entry} | cut -d':' -f1 )"
+        users[${i}]=${user}
+        printf "%4d : %s\n" ${i} ${user}
+    done
+    while true; do
+        read -p "Enter a number from 0 to ${i} : " n
+        if [ "${n}" = 0 ]; then
+            login -f root
+        elif [ "${n}" = 1 ]; then
+            exec reboot
+        elif [ "${n}" = 2 ]; then
+            exec halt
+        elif [ -n "$( echo "${n}" | grep "^[0-9]\+$" )" ] && \
+                [ -n "${users[${n}]}" ]; then
+            login -f ${users[${n}]}
+        else
+            echo "  *** Invalid choice ..."
+            continue
+        fi
+        break
+    done
+fi
+
+if grep "r" /tmp/xlogout &>/dev/null; then
+    reboot
+elif grep "h" /tmp/xlogout &>/dev/null; then
+    halt
+fi
+
+# This file is only needed for shutting down
+rm -f /tmp/checkse
+
+# End