diff options
Diffstat (limited to 'abs/core-testing/LinHES-config/templates/remotes/pixelview')
7 files changed, 558 insertions, 0 deletions
diff --git a/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv new file mode 100644 index 0000000..064ee57 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv @@ -0,0 +1,34 @@ +# +# contributed by Nathan Hand <nathanh@chirp.com.au> +# +# brand: Pixelview +# model: +# supported devices: Pixelview PlayTV PRO +# + +begin remote + name Pixelview + bits 8 + + begin codes + TV/FM 0x00000000000000e7 + FULL_SCREEN 0x00000000000000bf + CH+ 0x0000000000000049 + CH- 0x00000000000000c1 + VOL- 0x000000000000006a + VOL+ 0x000000000000004a + MUTE 0x0000000000000047 + SOURCE 0x00000000000000e1 + 1 0x00000000000000e0 + 2 0x00000000000000c8 + 3 0x00000000000000e8 + 4 0x0000000000000060 + 5 0x0000000000000062 + 6 0x00000000000000c9 + 7 0x00000000000000c0 + 8 0x00000000000000c2 + 9 0x0000000000000061 + 0 0x0000000000000040 + end codes +end remote + diff --git a/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv_bt878 b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv_bt878 new file mode 100644 index 0000000..f017a3b --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv_bt878 @@ -0,0 +1,54 @@ +# +# contributed by Michal Kochanowicz <mkochano@pld.org.pl> +# based on file contributred by Nathan Hand <nathanh@chirp.com.au> +# +# brand: PixelView +# model: BT878+W/FM +# supported devices: PixelView BT878+W/FM +# + +begin remote + name PixelView + bits 8 +# repeat_bit 2 + repeat 9080 2189 + gap 108056 + repeat_bit 0 + + begin codes + POWER 0x00000000000000aa + TV/FM 0x00000000000000e7 + TELETEXT 0x000000000000003f + SCAN 0x0000000000000041 + +/- 0x0000000000000069 + EJECT 0x000000000000002a + STOP 0x000000000000008a + SOURCE 0x00000000000000e1 + STEREO 0x00000000000000df + ENTER 0x000000000000005f + SEEK_NEXT 0x0000000000000067 + SEEK_FWD 0x00000000000000c7 + CH_UP 0x0000000000000049 + VOL_UP 0x000000000000004a + RECALL 0x0000000000000048 + PAUSE 0x0000000000000068 + PLAY 0x00000000000000ca + CH_DOWN 0x00000000000000c1 + VOL_DOWN 0x000000000000006a + SEEK_PREV 0x000000000000000a + SEEK_BACK 0x0000000000000042 + ZOOM 0x00000000000000bf + MUTE 0x0000000000000047 + 1 0x00000000000000e0 + 2 0x00000000000000c8 + 3 0x00000000000000e8 + 4 0x0000000000000060 + 5 0x0000000000000062 + 6 0x00000000000000c9 + 7 0x00000000000000c0 + 8 0x00000000000000c2 + 9 0x0000000000000061 + 0 0x0000000000000040 + end codes +end remote + diff --git a/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv_pro b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv_pro new file mode 100644 index 0000000..84e84a9 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv_pro @@ -0,0 +1,159 @@ +# +# brand: PixelView +# model: PlayTV Pro remote control +# +# supported devices: +# works both with home-brew and TV card receiver (use lirc-0.6.6 or better) +# + + +begin remote + + name pixelviewp + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 20 + aeps 200 + + pre_data_bits 16 + pre_data 0x61d6 + + header 9000 4500 + one 563 1687 + zero 563 562 + ptrail 563 + repeat 9000 2250 + gap 108000 + toggle_bit 0 + + frequency 38000 + duty_cycle 33 + + begin codes + + power 0x0000000000007887 + zoom 0x00000000000038C7 + scan 0x000000000000E01F + tv/fm 0x000000000000C03F + vol+ 0x000000000000F807 + vol- 0x000000000000E817 + chan+ 0x0000000000006897 + chan- 0x00000000000028D7 + mute 0x00000000000018E7 + source 0x00000000000000FF + loop 0x000000000000C837 + +100 0x00000000000008F7 + fn- 0x00000000000020DF + fn+ 0x00000000000030CF + reset 0x000000000000B04F + freeze 0x000000000000F00F + function 0x000000000000708F + 0 0x00000000000040BF + 1 0x000000000000807F + 2 0x000000000000D02F + 3 0x000000000000D827 + 4 0x000000000000A05F + 5 0x000000000000906F + 6 0x000000000000A857 + 7 0x000000000000609F + 8 0x00000000000050AF + 9 0x00000000000048B7 + + end codes + +end remote + + +# This config file was automatically generated +# using lirc-0.7.2(pixelview_pro) on Mon Dec 5 03:17:25 2005 +# +# contributed by Thadeu A. Coelho de Paula +# thadeudepaula (at) gmail (dot) com +# http://mundolivre.hostrix.com.br +# +# brand: PixelView +# model: PlayTV MPEG2 (M4900) +# +# supported devices: +# This TV Card + + +begin remote + + name PixelView_PlayTV_MPEG2 + bits 16 + eps 30 + aeps 100 + + pre_data_bits 16 + pre_data 0x61D6 + + header 9000 4500 + one 563 1687 + zero 563 562 + ptrail 563 + repeat 9000 2250 + gap 108000 + toggle_bit 0 + + frequency 38000 + duty_cycle 33 + + + + begin codes + timeshift 0xC03F + power 0x7887 + 1 0x807F + 2 0xD02F + 3 0xD827 + 4 0xA05F + 5 0x906F + 6 0xA857 + 7 0x609F + 8 0x50AF + 9 0x48B7 + 0 0x40BF + loop 0xC837 + +100 0x08F7 + source 0x00FF + mute 0x18E7 + ch+ 0x6897 + ch- 0x28D7 + vol+ 0xF807 + vol- 0xE817 + zoom 0x38C7 + snapshot 0x9867 + scan 0x58A7 + bw 0x20DF + rec 0x708F + fw 0x30CF + stop 0xB847 + play 0x10EF + pause 0xF00F + tv 0xB04F + fm 0xE01F + end codes + +end remote + +# CONTROL LAYOUT: +# +# TIMESHIFT POWER +# +# 1 2 3 +# 4 5 6 +# 7 8 9 +# LOOP 0 SCAN +# SOURCE MUTE +# +# CH+ +# VOL- ZOOM VOL+ +# CH- +# +# SNAPSHOT SCAN +# +# BW REC FW +# STOP PLAY PAUSE +# +# TV FM diff --git a/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.remotemaster b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.remotemaster new file mode 100644 index 0000000..1b75e42 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.remotemaster @@ -0,0 +1,117 @@ +# this config file was MANUALLY generated +# using lirc-0.6.0pre3 on Thu Feb 3 11:53:38 2000 +# +# contributed by Petre Rodan <rodan@subdimension.com> +# +# brand: PixelView +# model: RemoteMaster 2000 +# supported devices: ComboTV series +# receiver type: /dev/ttySx +# video card: PixelView bttv848 pll=1 type=5 +# + +begin remote + + name RemoteMaster_2000_12b + bits 20 + flags SPACE_ENC + eps 30 + aeps 100 + + one 0 833 + zero 833 0 + pre_data_bits 10 + pre_data 0x12B + gap 189264 + + begin codes + 1 0x0000000000052D2F + 2 0x0000000000052CCF + 3 0x0000000000052CAF + 4 0x0000000000052D37 + 5 0x0000000000052CDF + 6 0x000000000005359F + 7 0x0000000000052D4F + 8 0x0000000000052D3F + 9 0x00000000000534DF + 0 0x0000000000052D57 + ENTER 0x0000000000052CD7 + +10 0x0000000000053537 + POWER 0x0000000000054D5F + MODE 0x00000000000534AF + TAB 0x0000000000053557 + ZOOM 0x000000000005355F + FREEZE 0x000000000005356F + SEEK-- 0x0000000000054DAF + PAUSE 0x0000000000052CB7 + SEEK++ 0x00000000000534B7 + SEEK- 0x0000000000052D5F + PLAY 0x0000000000052D9F + SEEK+ 0x00000000000534CF + STOP 0x0000000000054D9F + EJECT 0x0000000000054D6F + F1 0x000000000005354F + F2 0x00000000000534D7 + F3 0x00000000000534BF + F4 0x000000000005352F + CH- 0x000000000005353F + CH+ 0x00000000000535AF + VOL- 0x0000000000052D6F + VOL+ 0x0000000000052DAF + end codes + +end remote + +begin remote + + name RemoteMaster_2000_14b + bits 20 + flags SPACE_ENC + eps 30 + aeps 100 + + one 0 833 + zero 833 0 + pre_data_bits 10 + pre_data 0x14B + gap 189264 + + begin codes + 1 0x0000000000052D2F + 2 0x0000000000052CCF + 3 0x0000000000052CAF + 4 0x0000000000052D37 + 5 0x0000000000052CDF + 6 0x000000000005359F + 7 0x0000000000052D4F + 8 0x0000000000052D3F + 9 0x00000000000534DF + 0 0x0000000000052D57 + ENTER 0x0000000000052CD7 + +10 0x0000000000053537 + POWER 0x0000000000054D5F + MODE 0x00000000000534AF + TAB 0x0000000000053557 + ZOOM 0x000000000005355F + FREEZE 0x000000000005356F + SEEK-- 0x0000000000054DAF + PAUSE 0x0000000000052CB7 + SEEK++ 0x00000000000534B7 + SEEK- 0x0000000000052D5F + PLAY 0x0000000000052D9F + SEEK+ 0x00000000000534CF + STOP 0x0000000000054D9F + EJECT 0x0000000000054D6F + F1 0x000000000005354F + F2 0x00000000000534D7 + F3 0x00000000000534BF + F4 0x000000000005352F + CH- 0x000000000005353F + CH+ 0x00000000000535AF + VOL- 0x0000000000052D6F + VOL+ 0x0000000000052DAF + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircmd.conf.playtv_pro b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircmd.conf.playtv_pro new file mode 100644 index 0000000..e277fe6 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircmd.conf.playtv_pro @@ -0,0 +1,29 @@ +# lircmd.conf file to be used with PixeView PlayTV pro +# +# lircmd config file +# + +#PROTOCOL IntelliMouse + +ACCELERATOR 2 20 5 + +ACTIVATE * +100 + +MOVE_N * 2 +MOVE_NE * 3 +MOVE_E * 6 +MOVE_SE * 9 +MOVE_SW * 7 +MOVE_W * 4 +MOVE_NW * 1 +MOVE_S * 8 + +BUTTON1_TOGGLE * tv/fm +BUTTON2_TOGGLE * scan +BUTTON3_TOGGLE * zoom + +BUTTON1_CLICK * 0 +BUTTON2_CLICK * loop +BUTTON3_CLICK * source + +# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircmd.conf.remotemaster b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircmd.conf.remotemaster new file mode 100644 index 0000000..07d2547 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircmd.conf.remotemaster @@ -0,0 +1,31 @@ +# lircmd.conf file to be used with RemoteMaster 2000 +# +# lircmd config file +# + +# ACCELERATOR start max multiplier + +#PROTOCOL IntelliMouse + +ACCELERATOR 2 20 5 + +ACTIVATE * ENTER + +MOVE_N * 2 +MOVE_NE * 3 +MOVE_E * 6 +MOVE_SE * 9 +MOVE_SW * 7 +MOVE_W * 4 +MOVE_NW * 1 +MOVE_S * 8 + +BUTTON1_TOGGLE * +10 +BUTTON2_TOGGLE * FREEZE +#BUTTON3_TOGGLE * LIST + +BUTTON1_CLICK * 5 +BUTTON2_CLICK * 0 +#BUTTON3_CLICK * POWER + +# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircrc.playtv_pro b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircrc.playtv_pro new file mode 100644 index 0000000..4e495c8 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircrc.playtv_pro @@ -0,0 +1,134 @@ +# +# This is an example of ~/.lircrc file +# It is a copy of actual setup from my home machine. +# Contributed by Artur Lipowski <alipowski@interia.pl> +# + begin + prog = irexec + button = power + config = xawtv-remote quit + flags = mode + end + begin + prog = irexec + button = source + repeat = 1 + config = xawtv-remote setinput next + end + begin + prog = irexec + button = zoom + repeat = 1 + config = xawtv-remote fullscreen + end + begin + prog = irexec + button = chan- + repeat = 1 + config = xawtv-remote setstation prev + end + begin + prog = irexec + button = chan+ + repeat = 1 + config = xawtv-remote setstation next + end + begin + prog = irxevent + button = loop + repeat = 1 + config = Key c xawtv + end + begin + prog = irxevent + button = scan + repeat = 1 + config = Key ctrl-z xawtv + end + begin + prog = irxevent + button = mute + config = Key a xawtv + end + begin + prog = irxevent + button = vol+ + repeat = 1 + config = Key KP_Add xawtv + end + begin + prog = irxevent + button = vol- + repeat = 1 + config = Key KP_Subtract xawtv + end + begin + prog = irexec + button = 1 + config = xawtv-remote setstation 0 + end + begin + prog = irexec + button = 2 + config = xawtv-remote setstation 1 + end + begin + prog = irexec + button = 3 + config = xawtv-remote setstation 2 + end + begin + prog = irexec + button = 4 + config = xawtv-remote setstation 3 + end + begin + prog = irexec + button = 5 + config = xawtv-remote setstation 4 + end + begin + prog = irexec + button = 6 + config = xawtv-remote setstation 5 + end + begin + prog = irexec + button = 7 + config = xawtv-remote setstation 6 + end + begin + prog = irexec + button = 8 + config = xawtv-remote setstation 7 + end + begin + prog = irexec + button = 9 + config = xawtv-remote setstation 8 + end + begin + prog = irexec + button = 0 + config = xawtv-remote setstation 0 + end + begin + prog = irexec + button = function + config = xawtv-remote attr next + end + begin + prog = irexec + button = fn+ + config = xawtv-remote attr inc + end + begin + prog = irexec + button = fn- + config = xawtv-remote attr dec + end + begin + prog = irexec + button = +100 + config = xawtv-remote msg " `date +%H:%M` " + end |