diff options
Diffstat (limited to 'abs/core-testing/system-templates/templates/remotes/Cinergy_T2')
3 files changed, 0 insertions, 546 deletions
diff --git a/abs/core-testing/system-templates/templates/remotes/Cinergy_T2/lircd-cinergyT2.conf b/abs/core-testing/system-templates/templates/remotes/Cinergy_T2/lircd-cinergyT2.conf deleted file mode 100755 index 168743b..0000000 --- a/abs/core-testing/system-templates/templates/remotes/Cinergy_T2/lircd-cinergyT2.conf +++ /dev/null @@ -1,72 +0,0 @@ -# -# this config file was generated -# using lirc-0.7.1pre2(serial) kantonix VDR -# -# contributed by Stefan Bernshausen -# -# brand: Terratec -# model no. of remote control: Cinergy T2 -# devices being controlled by this remote: -# - -begin remote - - name Terratec_Cinergy_T2 - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9007 4495 - one 557 1683 - zero 557 555 - ptrail 546 - pre_data_bits 16 - pre_data 0x20D7 - gap 110968 - toggle_bit 0 - - - begin codes - 0 0x30CF - 1 0x40BF - 2 0xC03F - 3 0x20DF - 4 0xA05F - 5 0x609F - 6 0xE01F - 7 0x10EF - 8 0x906F - 9 0x50AF - Green 0x18E7 - Osd 0x708F - Volume+ 0x38C7 - Volume- 0x7887 - Ch+ 0xD827 - Ch- 0xF807 - Epg 0xF00F - Av 0xD02F - Power 0x807F - Txt 0xA857 - Red 0xE817 - Mute 0xB847 - Pause 0x02FD - Play 0x32CD - Record 0x1AE5 - Fback 0x2AD5 - Stop 0x12ED - Ffor 0x3AC5 - Up 0x08F7 - Down 0x28D7 - Left 0x8877 - Right 0xC837 - Info 0x6897 - Ok 0x48B7 - Blue 0x58A7 - Yellow 0x9867 - Red 0xE817 - Back 0xB04F - - end codes - -end remote
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Cinergy_T2/lircrc-cinergyT2.txt b/abs/core-testing/system-templates/templates/remotes/Cinergy_T2/lircrc-cinergyT2.txt deleted file mode 100755 index c4042fe..0000000 --- a/abs/core-testing/system-templates/templates/remotes/Cinergy_T2/lircrc-cinergyT2.txt +++ /dev/null @@ -1,474 +0,0 @@ -# Channel Up -begin -prog = mythtv -button = Ch+ -config = Up -end - -# Channel Down -begin -prog = mythtv -button = Ch- -config = Down -end - -# General Left -begin -prog = mythtv -button = Left -config = Left -end - -# General Right -begin -prog = mythtv -button = Right -config = Right -end - - # LiveTV browse up channel -begin -prog = mythtv -button = Up -config = Up -end - -# LiveTV browse down channel -begin -prog = mythtv -button = Down -config = Down -end - -# Volume Up -begin -prog = mythtv -button = Volume+ -config = F11 -end - -# Volume Down -begin -prog = mythtv -button = Volume- -config = F10 -end - - # OK/Select -begin -prog = mythtv -button = Ok -config = Space -end - -# Play -begin -prog = mythtv -button = Play -config = Return -end - -# Stop -begin -prog = mythtv -button = Stop -config = Esc -end - -# Escape/Exit/Back -begin -prog = mythtv -button = -config = Esc -end - -# Power Off/Exit -begin -prog = irexec -button = Power -config = /usr/bin/mythpowerbutton.sh -end - -# Pause -begin -prog = mythtv -button = Pause -config = P -end - -# Mute -begin -prog = mythtv -button = Mute -config = | -end - -# Fast forward (10 sec default) -begin -prog = mythtv -button = Ffor -config = Right -end - -# Rewind (10 sec default) -begin -prog = mythtv -button = Fback -config = Left -end - -# Skip forward (10 min default) -begin -prog = mythtv -button = -config = PgDown -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = -config = PgUp -end - -# Record -begin -prog = mythtv -button = Record -config = R -end - -# Delete -begin -prog = mythtv -button = Red -config = D -end - -# OSD browse -begin -prog = mythtv -button = Osd -config = O -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = Epg -config = M -end - -# Bring up OSD info -begin -prog = mythtv -button = Info -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = Green -config = W -end - -# Seek to previous commercial cut point -begin -prog = mythtv -button = -config = Q -end - -# Seek to next commercial cut point -begin -prog = mythtv -button = -config = Z -end - -# Numbers 0-9 - -begin -prog = mythtv -button = 0 -config = 0 -end - -begin -prog = mythtv -button = 1 -config = 1 -end - -begin -prog = mythtv -button = 2 -config = 2 -end - -begin -prog = mythtv -button = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -config = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -end - -begin -prog = mythtv -button = 7 -config = 7 -end - -begin -prog = mythtv -button = 8 -config = 8 -end - -begin -prog = mythtv -button = 9 -config = 9 -end - -# Previous channel -begin -prog = mythtv -button = Blue -config = H -end - -# Closed Captioning -begin -prog = mythtv -button = -config = T -end - -# Picture in Picture -begin -prog = mythtv -button = -config = V -end - -# Change channels on both cards -begin -prog = mythtv -button = -config = N -end - -# Clear cutpoints in cutlist -begin -prog = mythtv -button = -config = Q -end - - - - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = Osd -config = osd -end - -# Pause playback -begin -prog = mplayer -button = Pause -config = pause -end - -# Mute -begin -prog = mplayer -button = Mute -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = Fback -config = seek -10 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = Ffor -config = seek +30 -end - -# Quit -begin -prog = mplayer -button = Stop -config = quit -end - -# Seek forward 10 minutes -begin -prog = mplayer -button = Ch+ -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = Ch- -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = Blue -config = vo_fullscreen -end - - - -### Xine lirc setup - -begin -prog = xine -button = Play -config = Play -end - -begin -prog = xine -button = Stop -config = Stop -end - -begin -prog = xine -button = Stop -config = Quit -end - -begin -prog = xine -button = Pause -config = Pause -end - -begin -prog = xine -button = Up -config = EventUp -end - -begin -prog = xine -button = Down -config = EventDown -end - -begin -prog = xine -button = Left -config = EventLeft -end - -begin -prog = xine -button = Right -config = EventRight -end - -begin -prog = xine -button = Ok -config = EventSelect -end - -begin -prog = xine -button = Epg -config = Menu -end - -begin -prog = xine -button = Ffor -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = Fback -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = Volume+ -config = Volume+ -end - -begin -prog = xine -button = Volume- -config = Volume- -end - -begin -prog = xine -button = Mute -config = Mute -end - -begin -prog = xine -button = Stop -config = RootMenu -end - -begin -prog = xine -button = Ch+ -config = EventNext -end - -begin -prog = xine -button = Ch- -config = EventPrior -end - -begin -prog = xine -button = Info -config = OSDStreamInfos -end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Cinergy_T2/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Cinergy_T2/preview.jpg Binary files differdeleted file mode 100644 index b777ac9..0000000 --- a/abs/core-testing/system-templates/templates/remotes/Cinergy_T2/preview.jpg +++ /dev/null |
