diff options
Diffstat (limited to 'abs/core-testing/system-templates/templates/remotes/Flyvideo_3000')
3 files changed, 0 insertions, 521 deletions
diff --git a/abs/core-testing/system-templates/templates/remotes/Flyvideo_3000/lircd-flyvideo3000.conf b/abs/core-testing/system-templates/templates/remotes/Flyvideo_3000/lircd-flyvideo3000.conf deleted file mode 100755 index 8b4f23e..0000000 --- a/abs/core-testing/system-templates/templates/remotes/Flyvideo_3000/lircd-flyvideo3000.conf +++ /dev/null @@ -1,47 +0,0 @@ -# lircd.conf.Flyvideo_3000_devinput -# -# Lirc configuration file for the LifeView FlyVideo 3000 remote. -# -# Adapted from the standard linux input layer config file found at -# http://linux.bytesex.org/v4l2/linux-input-layer-lircd.conf -# The remote name and button names are consistent with lircd.conf.Flyvideo_3000. -# -# Created January 22, 2005 -# -# contributed by Jason Anderson (jasonofhoulton@hotmail.com) -# -# brand: Lifeview -# model no. of remote control: Flyvideo 3000 -# devices being controlled by this remote: -# - -begin remote - name Flyvideo_3000 - bits 32 - begin codes - air/catv 0x10182 - video 0x10189 - audio 0x10188 - power 0x10074 - av_source 0x100b0 - full_screen 0x10174 - stereo 0x100c0 - Mute 0x10071 - 1 0x1004f - 2 0x10050 - 3 0x10051 - vol+ 0x10073 - 4 0x1004b - 5 0x1004c - 6 0x1004d - vol- 0x10072 - 7 0x10047 - 8 0x10048 - 9 0x10049 - ch+ 0x10192 - recall 0x10081 - 0 0x10052 - enter 0x10060 - ch- 0x10193 - end codes -end remote diff --git a/abs/core-testing/system-templates/templates/remotes/Flyvideo_3000/lircrc-flyvideo3000.txt b/abs/core-testing/system-templates/templates/remotes/Flyvideo_3000/lircrc-flyvideo3000.txt deleted file mode 100755 index 565c2d9..0000000 --- a/abs/core-testing/system-templates/templates/remotes/Flyvideo_3000/lircrc-flyvideo3000.txt +++ /dev/null @@ -1,474 +0,0 @@ -# Channel Up -begin -prog = mythtv -button = ch+ -config = Up -end - -# Channel Down -begin -prog = mythtv -button = ch- -config = Down -end - -# General Left -begin -prog = mythtv -button = -config = Left -end - -# General Right -begin -prog = mythtv -button = -config = Right -end - - # LiveTV browse up channel -begin -prog = mythtv -button = ch+ -config = Up -end - -# LiveTV browse down channel -begin -prog = mythtv -button = ch- -config = Down -end - -# Volume Up -begin -prog = mythtv -button = vol+ -config = F11 -end - -# Volume Down -begin -prog = mythtv -button = vol- -config = F10 -end - - # OK/Select -begin -prog = mythtv -button = enter -config = Space -end - -# Play -begin -prog = mythtv -button = -config = Return -end - -# Stop -begin -prog = mythtv -button = -config = Esc -end - -# Escape/Exit/Back -begin -prog = mythtv -button = -config = Esc -end - -# Power Off/Exit -begin -prog = irexec -button = power -config = /usr/bin/mythpowerbutton.sh -end - -# Pause -begin -prog = mythtv -button = -config = P -end - -# Mute -begin -prog = mythtv -button = Mute -config = | -end - -# Fast forward (10 sec default) -begin -prog = mythtv -button = -config = Right -end - -# Rewind (10 sec default) -begin -prog = mythtv -button = -config = Left -end - -# Skip forward (10 min default) -begin -prog = mythtv -button = -config = PgDown -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = -config = PgUp -end - -# Record -begin -prog = mythtv -button = -config = R -end - -# Delete -begin -prog = mythtv -button = -config = D -end - -# OSD browse -begin -prog = mythtv -button = -config = O -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = -config = M -end - -# Bring up OSD info -begin -prog = mythtv -button = -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = -config = W -end - -# Seek to previous commercial cut point -begin -prog = mythtv -button = -config = Q -end - -# Seek to next commercial cut point -begin -prog = mythtv -button = -config = Z -end - -# Numbers 0-9 - -begin -prog = mythtv -button = 0 -config = 0 -end - -begin -prog = mythtv -button = 1 -config = 1 -end - -begin -prog = mythtv -button = 2 -config = 2 -end - -begin -prog = mythtv -button = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -config = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -end - -begin -prog = mythtv -button = 7 -config = 7 -end - -begin -prog = mythtv -button = 8 -config = 8 -end - -begin -prog = mythtv -button = 9 -config = 9 -end - -# Previous channel -begin -prog = mythtv -button = recall -config = H -end - -# Closed Captioning -begin -prog = mythtv -button = -config = T -end - -# Picture in Picture -begin -prog = mythtv -button = -config = V -end - -# Change channels on both cards -begin -prog = mythtv -button = -config = N -end - -# Clear cutpoints in cutlist -begin -prog = mythtv -button = -config = Q -end - - - - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = -config = osd -end - -# Pause playback -begin -prog = mplayer -button = -config = pause -end - -# Mute -begin -prog = mplayer -button = Mute -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = -config = seek -10 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = -config = seek +30 -end - -# Quit -begin -prog = mplayer -button = -config = quit -end - -# Seek forward 10 minutes -begin -prog = mplayer -button = -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = full_Screen -config = vo_fullscreen -end - - - -### Xine lirc setup - -begin -prog = xine -button = -config = Play -end - -begin -prog = xine -button = -config = Stop -end - -begin -prog = xine -button = -config = Quit -end - -begin -prog = xine -button = -config = Pause -end - -begin -prog = xine -button = ch+ -config = EventUp -end - -begin -prog = xine -button = ch- -config = EventDown -end - -begin -prog = xine -button = -config = EventLeft -end - -begin -prog = xine -button = -config = EventRight -end - -begin -prog = xine -button = enter -config = EventSelect -end - -begin -prog = xine -button = -config = Menu -end - -begin -prog = xine -button = -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = vol+ -config = Volume+ -end - -begin -prog = xine -button = vol- -config = Volume- -end - -begin -prog = xine -button = Mute -config = Mute -end - -begin -prog = xine -button = -config = RootMenu -end - -begin -prog = xine -button = -config = EventNext -end - -begin -prog = xine -button = -config = EventPrior -end - -begin -prog = xine -button = -config = OSDStreamInfos -end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Flyvideo_3000/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Flyvideo_3000/preview.jpg Binary files differdeleted file mode 100644 index a034186..0000000 --- a/abs/core-testing/system-templates/templates/remotes/Flyvideo_3000/preview.jpg +++ /dev/null |