diff options
Diffstat (limited to 'abs/core-testing/system-templates/templates/remotes/Pinnacle')
3 files changed, 0 insertions, 571 deletions
diff --git a/abs/core-testing/system-templates/templates/remotes/Pinnacle/lircd-pinnacle.conf b/abs/core-testing/system-templates/templates/remotes/Pinnacle/lircd-pinnacle.conf deleted file mode 100755 index ebc04d9..0000000 --- a/abs/core-testing/system-templates/templates/remotes/Pinnacle/lircd-pinnacle.conf +++ /dev/null @@ -1,97 +0,0 @@ -# -# contributed by Bart Alewijnse <scarfboy@yahoo.com> -# -# brand: Pinnacle Systems -# model: PCTV Remote (Perhaps other ones as well) -# supported devices: there's only one I know of. (serial) -# -# Mail me if your remote is only partly supported, or if it has different -# buttons than listed below. -# - -begin remote - - name PinnacleSysPCTVRemote - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0xFE - gap 180000 - toggle_bit 0 - - begin codes - Mute 0xB53C #Mute 0x000000000000003C - Power 0x2D2F #Power 0x000000000000002F - Chan+Play 0x173F #Chan+Play 0x000000000000003F - Chan-Stop 0xC63E #Chan-Stop 0x000000000000003E - Vol+FF 0xF13B #Vol+FF 0x000000000000003B - Vol-Rew 0x643D #Vol-Rew 0x000000000000003D - 1 0x9F31 #1 0x0000000000000031 - 2 0x3D32 #2 0x0000000000000032 - 3 0xEC33 #3 0x0000000000000033 - 4 0xA834 #4 0x0000000000000034 - 5 0x7935 #5 0x0000000000000035 - 6 0xDB36 #6 0x0000000000000036 - 7 0x0A37 #7 0x0000000000000037 - 8 0x5338 #8 0x0000000000000038 - 9 0x8239 #9 0x0000000000000039 - Fullscreen 0x5E2D #Fullscreen 0x000000000000002D - 0/AV 0x203A #0/AV 0x000000000000003A - Info 0xCB2B #Info 0x000000000000002B - Preview 0xFC2E #Preview 0x000000000000002E - Record 0x3027 #Record 0x0000000000000027 - Chan_Last 0x4325 #Chan_Last 0x0000000000000025 - F_TV 0xE126 #F_TV 0x0000000000000026 - F_TELETEXT 0xB829 #F_TELETEXT 0x0000000000000029 - F_RADIO 0x1A2A #F_RADIO 0x000000000000002A - -# -# here are some extra buttons a new version of the remote seems to have -# -# contributed by Robbert Monna <rjmonna@kabelfoon.nl> -# -# brand: Pinnacle Systems -# model: PCTV Remote (newest version?) -# supported devices: dongle on serial port (from TV-Card) -# - L 0x631F #L 0x000000000000001F - Zoom 0xB21E #Zoom 0x000000000000001E - vol+ 0x851B #vol+ 0x000000000000001B - vol- 0x590F #vol- 0x000000000000000F - channel+ 0x7E17 #channel+ 0x0000000000000017 - channel- 0xC11C #channel- 0x000000000000001C - middle 0x541A #middle 0x000000000000001A - Menu 0x101D #Menu 0x000000000000001D - next 0xF619 #next 0x0000000000000019 - undo 0xAF16 #undo 0x0000000000000016 - pause 0x0D15 #pause 0x0000000000000015 - redo 0x9813 #redo 0x0000000000000013 - Rewind 0x880E #Rewind 0x000000000000000E - Play 0x2A0D #Play 0x000000000000000D - Stop 0xBF0B #Stop 0x000000000000000B - FForward 0x4407 #FForward 0x0000000000000007 - EPG 0x2718 #EPG 0x0000000000000018 - -# here are some more buttons that seem to be mapped differently from -# the ones above - -# contributed by InterCeptor ceptor_7@freemail.hu -# -# brand: Pinnacle Systems PCTV Pro Remote -# model no. of remote control: (I can't find any numbers on it) -# supported devices: serial -# - - 9 0x0000000000000082 - Zoom 0x00000000000000B2 - middle 0x0000000000000014 - - - end codes -end remote - - diff --git a/abs/core-testing/system-templates/templates/remotes/Pinnacle/lircrc-pinnacle.txt b/abs/core-testing/system-templates/templates/remotes/Pinnacle/lircrc-pinnacle.txt deleted file mode 100755 index d3b9261..0000000 --- a/abs/core-testing/system-templates/templates/remotes/Pinnacle/lircrc-pinnacle.txt +++ /dev/null @@ -1,474 +0,0 @@ -# Channel Up -begin -prog = mythtv -button = channel+ -config = Up -end - -# Channel Down -begin -prog = mythtv -button = channel- -config = Down -end - -# General Left -begin -prog = mythtv -button = -config = Left -end - -# General Right -begin -prog = mythtv -button = -config = Right -end - - # LiveTV browse up channel -begin -prog = mythtv -button = channel+ -config = Up -end - -# LiveTV browse down channel -begin -prog = mythtv -button = channel- -config = Down -end - -# Volume Up -begin -prog = mythtv -button = vol+ -config = F11 -end - -# Volume Down -begin -prog = mythtv -button = vol- -config = F10 -end - - # OK/Select -begin -prog = mythtv -button = -config = Space -end - -# Play -begin -prog = mythtv -button = Play -config = Return -end - -# Stop -begin -prog = mythtv -button = Stop -config = Esc -end - -# Escape/Exit/Back -begin -prog = mythtv -button = undo -config = Esc -end - -# Power Off/Exit -begin -prog = irexec -button = Power -config = /usr/bin/mythpowerbutton.sh -end - -# Pause -begin -prog = mythtv -button = pause -config = P -end - -# Mute -begin -prog = mythtv -button = Mute -config = | -end - -# Fast forward (10 sec default) -begin -prog = mythtv -button = FForward -config = Right -end - -# Rewind (10 sec default) -begin -prog = mythtv -button = Rewind -config = Left -end - -# Skip forward (10 min default) -begin -prog = mythtv -button = Vol+FF -config = PgDown -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = Vol-Rew -config = PgUp -end - -# Record -begin -prog = mythtv -button = Record -config = R -end - -# Delete -begin -prog = mythtv -button = -config = D -end - -# OSD browse -begin -prog = mythtv -button = Menu -config = O -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = EPG -config = M -end - -# Bring up OSD info -begin -prog = mythtv -button = Info -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = -config = W -end - -# Seek to previous commercial cut point -begin -prog = mythtv -button = -config = Q -end - -# Seek to next commercial cut point -begin -prog = mythtv -button = -config = Z -end - -# Numbers 0-9 - -begin -prog = mythtv -button = 0 -config = 0 -end - -begin -prog = mythtv -button = 1 -config = 1 -end - -begin -prog = mythtv -button = 2 -config = 2 -end - -begin -prog = mythtv -button = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -config = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -end - -begin -prog = mythtv -button = 7 -config = 7 -end - -begin -prog = mythtv -button = 8 -config = 8 -end - -begin -prog = mythtv -button = 9 -config = 9 -end - -# Previous channel -begin -prog = mythtv -button = Chan_Last -config = H -end - -# Closed Captioning -begin -prog = mythtv -button = F_TELETEXT -config = T -end - -# Picture in Picture -begin -prog = mythtv -button = Fullscreen -config = V -end - -# Change channels on both cards -begin -prog = mythtv -button = -config = N -end - -# Clear cutpoints in cutlist -begin -prog = mythtv -button = -config = Q -end - - - - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = Menu -config = osd -end - -# Pause playback -begin -prog = mplayer -button = pause -config = pause -end - -# Mute -begin -prog = mplayer -button = Mute -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = Rewind -config = seek -10 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = FForward -config = seek +30 -end - -# Quit -begin -prog = mplayer -button = Stop -config = quit -end - -# Seek forward 10 minutes -begin -prog = mplayer -button = Vol+FF -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = Vol-Rew -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = Fullscreen -config = vo_fullscreen -end - - - -### Xine lirc setup - -begin -prog = xine -button = Play -config = Play -end - -begin -prog = xine -button = Stop -config = Stop -end - -begin -prog = xine -button = Stop -config = Quit -end - -begin -prog = xine -button = pause -config = Pause -end - -begin -prog = xine -button = channel+ -config = EventUp -end - -begin -prog = xine -button = channel- -config = EventDown -end - -begin -prog = xine -button = -config = EventLeft -end - -begin -prog = xine -button = -config = EventRight -end - -begin -prog = xine -button = -config = EventSelect -end - -begin -prog = xine -button = Menu -config = Menu -end - -begin -prog = xine -button = FForward -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = Rewind -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = vol+ -config = Volume+ -end - -begin -prog = xine -button = vol- -config = Volume- -end - -begin -prog = xine -button = Mute -config = Mute -end - -begin -prog = xine -button = Stop -config = RootMenu -end - -begin -prog = xine -button = next -config = EventNext -end - -begin -prog = xine -button = undo -config = EventPrior -end - -begin -prog = xine -button = Info -config = OSDStreamInfos -end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Pinnacle/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Pinnacle/preview.jpg Binary files differdeleted file mode 100644 index bd8e19e..0000000 --- a/abs/core-testing/system-templates/templates/remotes/Pinnacle/preview.jpg +++ /dev/null |