diff options
Diffstat (limited to 'abs/core-testing/system-templates/templates/remotes/hauppauge-grey')
3 files changed, 0 insertions, 704 deletions
diff --git a/abs/core-testing/system-templates/templates/remotes/hauppauge-grey/lircd-haupgrey.conf b/abs/core-testing/system-templates/templates/remotes/hauppauge-grey/lircd-haupgrey.conf deleted file mode 100644 index c0849ef..0000000 --- a/abs/core-testing/system-templates/templates/remotes/hauppauge-grey/lircd-haupgrey.conf +++ /dev/null @@ -1,199 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.5.5pre8 on Sun Apr 18 11:43:45 1999 -# -# contributed by Jens Leuschner <leuschner@gmx.net> -# -# brand: Hauppauge -# model: -# supported devices: WinTV primo; WinTV pci; WinTV radio -# -# This config file will work with both homebrew receivers and -# original Hauppauge TV cards !!! -# - -begin remote - - name Hauppauge - bits 13 - flags SHIFT_ENC - eps 30 - aeps 100 - - one 950 830 - zero 950 830 - plead 960 - gap 89584 - repeat_bit 2 - - begin codes - TV 0x000000000000100F - RADIO 0x000000000000100C - FULL_SCREEN 0x000000000000102E - CH+ 0x0000000000001020 - CH- 0x0000000000001021 - VOL- 0x0000000000001011 - VOL+ 0x0000000000001010 - MUTE 0x000000000000100D - SOURCE 0x0000000000001022 - 1 0x0000000000001001 - 2 0x0000000000001002 - 3 0x0000000000001003 - 4 0x0000000000001004 - 5 0x0000000000001005 - 6 0x0000000000001006 - 7 0x0000000000001007 - 8 0x0000000000001008 - 9 0x0000000000001009 - 0 0x0000000000001000 - RESERVED 0x000000000000101E - MINIMIZE 0x0000000000001026 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.6.6(animax) on Tue Apr 15 19:50:27 2003 -# -# contributed by -# -# brand: Hauppauge -# model no. of remote control: -# devices being controlled by this remote: PVR 2/350 -# - -begin remote - - name hauppauge_pvr - bits 13 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 969 811 - zero 969 811 - plead 1097 - gap 114605 - toggle_bit 2 - - - begin codes - Power 0x00000000000017FD - Go 0x00000000000017FB - 1 0x00000000000017C1 - 2 0x00000000000017C2 - 3 0x00000000000017C3 - 4 0x00000000000017C4 - 5 0x00000000000017C5 - 6 0x00000000000017C6 - 7 0x00000000000017C7 - 8 0x00000000000017C8 - 9 0x00000000000017C9 - Back/Exit 0x00000000000017DF - 0 0x00000000000017C0 - Menu 0x00000000000017CD - Red 0x00000000000017CB - Green 0x00000000000017EE - Yellow 0x00000000000017F8 - Blue 0x00000000000017E9 - Ch+ 0x00000000000017E0 - Ch- 0x00000000000017E1 - Vol- 0x00000000000017D1 - Vol+ 0x00000000000017D0 - Ok 0x00000000000017E5 - Mute 0x00000000000017CF - Blank 0x00000000000017CC - Full 0x00000000000017FC - Rewind 0x00000000000017F2 - Play 0x00000000000017F5 - Forward 0x00000000000017F4 - Record 0x00000000000017F7 - Stop 0x00000000000017F6 - Pause 0x00000000000017F0 - Replay 0x00000000000017E4 - Skip 0x00000000000017DE - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.0(any) on Sun Nov 28 20:25:09 2004 -# -# contributed by -# -# brand: Hauppauge 350 -# Created: G.J. Werler (The Netherlands) -# Project: Mythtv Fedora Pundit-R www.mythtvportal.com -# Date: 2004/11/28 -# model no. of remote control: Hauppauge A415-HPG -# devices being controlled by this remote: PVR-350 -# - -begin remote - - name Hauppauge_350 - bits 13 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 969 811 - zero 969 811 - plead 1097 - gap 114605 - toggle_bit 2 - - - begin codes - Go 0x00000000000017BB - Power 0x00000000000017BD - TV 0x000000000000179C - Videos 0x0000000000001798 - Music 0x0000000000001799 - Pictures 0x000000000000179A - Guide 0x000000000000179B - Radio 0x000000000000178C - Up 0x0000000000001794 - Left 0x0000000000001796 - Right 0x0000000000001797 - Down 0x0000000000001795 - OK 0x00000000000017A5 - Back/Exit 0x000000000000179F - Menu/i 0x000000000000178D - Vol+ 0x0000000000001790 - Vol- 0x0000000000001791 - Prev.Ch 0x0000000000001792 - Mute 0x000000000000178F - Ch+ 0x00000000000017A0 - Ch- 0x00000000000017A1 - Record 0x00000000000017B7 - Stop 0x00000000000017B6 - Rewind 0x00000000000017B2 - Play 0x00000000000017B5 - Forward 0x00000000000017B4 - Replay/SkipBackward 0x00000000000017A4 - Pause 0x00000000000017B0 - SkipForward 0x000000000000179E - 1 0x0000000000001781 - 2 0x0000000000001782 - 3 0x0000000000001783 - 4 0x0000000000001784 - 5 0x0000000000001785 - 6 0x0000000000001786 - 7 0x0000000000001787 - 8 0x0000000000001788 - 9 0x0000000000001789 - Asterix 0x000000000000178A - 0 0x0000000000001780 - # 0x000000000000178E - Red 0x000000000000178B - Green 0x00000000000017AE - Yellow 0x00000000000017B8 - Blue 0x00000000000017A9 - end codes - -end remote diff --git a/abs/core-testing/system-templates/templates/remotes/hauppauge-grey/lircrc-haupgrey.txt b/abs/core-testing/system-templates/templates/remotes/hauppauge-grey/lircrc-haupgrey.txt deleted file mode 100644 index 2f1e514..0000000 --- a/abs/core-testing/system-templates/templates/remotes/hauppauge-grey/lircrc-haupgrey.txt +++ /dev/null @@ -1,505 +0,0 @@ -# lircrc.example.HauppaugeGrey-nativelirc -# 2003-09-17, Robert Kulagowski -# mailto:rkulagow@rocketmail.com -# Save this file in ~/.mythtv/lircrc - -begin - prog = mythtv - button = Power - config = Esc -end - -begin - prog = mythtv - button = Go -# Swap the PiP windows - config = N -end - -begin - prog = mythtv - button = 1 - config = 1 -end - -begin - prog = mythtv - button = 2 - config = 2 -end - -begin - prog = mythtv - button = 3 - config = 3 -end - -begin - prog = mythtv - button = 4 - config = 4 -end - -begin - prog = mythtv - button = 5 - config = 5 -end - -begin - prog = mythtv - button = 6 - config = 6 -end - -begin - prog = mythtv - button = 7 - config = 7 -end - -begin - prog = mythtv - button = 8 - config = 8 -end - -begin - prog = mythtv - button = 9 - config = 9 -end - -begin - prog = mythtv - button = Back/Exit - config = Esc -end - -begin - prog = mythtv - button = 0 - config = 0 -end - -begin - prog = mythtv - button = Menu - config = M -end - -# Below are keys used with the Hauppauge Grey remote - -begin - prog = mythtv -# This is the Red key -# We'll use it for "Delete" - button = Red - config = D -end - -begin - prog = mythtv -# This is the Green key -# We'll use it for "Information" - button = Green - config = I -end - -# Note the "repeat = " strings in the volume and channel. -# This means that if you hold down the key, every nth instance will be -# passed. This depends on your system, so you may want to increase or -# decrease this and see what happens. repeat = 1 is probably too -# fast. - -begin - prog = mythtv -# This is the Yellow key -# Use it as a volume key - button = Yellow - repeat = 3 - config = F10 -end - -begin - prog = mythtv -# This is the Blue key -# Use it as a volume key - button = Blue - repeat = 3 - config = F11 -end - -begin - prog = mythtv - button = Ch+ -# This is the "up" on the central diamond - repeat = 3 - config = Up -end - -begin - prog = mythtv - button = Ch- -# This is the "down" on the central diamond - repeat = 3 - config = Down -end - -begin - prog = mythtv - button = Vol- -# This is the "left" on the central diamond - repeat = 3 - config = Left -end - -begin - prog = mythtv - button = Vol+ -# This is the "right" on the central diamond - repeat = 3 - config = Right -end - -begin - prog = mythtv -# Middle button on the diamond - button = Ok - config = Return -end - -begin - prog = mythtv - button = Mute - config = F9 -end - -begin - prog = mythtv -# Change focus for PiP (to change channel in the other window) - button = Blank - config = B -end - -begin - prog = mythtv -# Toggle PiP on/off - button = Full - config = V -end - -begin - prog = mythtv - button = Rewind - config = Left -end - -begin - prog = mythtv - button = Play - config = P -end - -begin - prog = mythtv - button = Forward - config = Right -end - -begin - prog = mythtv - button = Record - config = R -end - -begin - prog = mythtv -# Teletext - button = Stop - config = T -end - -begin - prog = mythtv - button = Pause - config = P -end - -begin - prog = mythtv - button = Replay -# Use for backwards commercial skip - config = Q -end - -begin - prog = mythtv - button = Skip -# Use for forward commercial skip - config = Z -end - -#MPlayer -begin - prog = mplayer - button = Power - config = quit -end - -begin - prog = mplayer - button = Menu - config = osd -end - -begin - prog = mplayer - button = Rewind - config = seek -10 - repeat = 1 -end - -begin - prog = mplayer - button = Forward - config = seek +10 - repeat = 1 -end - -begin - prog = mplayer - button = Replay - config = seek -60 - repeat = 1 -end - -begin - prog = mplayer - button = Skip - config = seek +60 - repeat = 1 -end - -begin - prog = mplayer - button = Pause - config = pause -end - -begin - prog = mplayer - button = Play - config = pause -end - -begin - prog = mplayer - button = Back/Exit - config = quit -end - -begin - prog = mplayer - button = Vol+ - config = volume +1 - repeat = 1 -end - -begin - prog = mplayer - button = Vol- - config = volume -1 - repeat = 1 -end - -begin - prog = mplayer - button = Mute - config = mute -end -##XINE - - begin - prog = xine - button = Play - repeat = 3 - config = Play - end - - begin - prog = xine - button = Stop - repeat = 3 - config = Stop - end - - begin - prog = xine - button = Back/Exit - config = Quit - end - - begin - prog = xine - button = Pause - repeat = 3 - config = Pause - end - - begin - prog = xine - button = Ch+ - repeat = 4 - config = EventUp - end - - begin - prog = xine - button = Ch- - repeat = 4 - config = EventDown - end - - begin - prog = xine - button = Vol- - repeat = 4 - config = EventLeft - end - - begin - prog = xine - button = Vol+ - repeat = 4 - config = EventRight - end - - begin - prog = xine - button = Ok - repeat = 0 - config = EventSelect - end - - begin - prog = xine - button = Menu - repeat = 0 - config = Menu - end - - #vol down - begin - prog = xine - button = Yellow - repeat = 1 - config = Volume- - end - - #vol up - begin - prog = xine - button = Red - repeat = 1 - config = Volume+ - end - - begin - prog = xine - button = Forward - repeat = 2 - config = SeekRelative+30 - end - - begin - prog = xine - button = Rewind - repeat = 2 - config = SeekRelative-30 - end - - #ch up - begin - prog = xine - button = Green - repeat = 1 - config = SeekRelative+60 - end - - #ch down - begin - prog = xine - button = Blue - repeat = 1 - config = SeekRelative-60 - end - - #sleep - begin - prog = xine - button = Go - repeat = 1 - config = ZoomIn - end - - #display - begin - prog = xine - button = Skip - repeat = 1 - config = ZoomOut - end - - #skip chapter forward - begin - prog = xine - button = Skip - repeat = 1 - config = EventNext - end - - #skip chapter backward - begin - prog = xine - button = Replay - repeat = 1 - config = EventPrior - end - - begin - prog = lircnav - button = Vol- - config = page_down - end - - begin - prog = lircnav - button = Vol+ - config = page_up - end - - begin - prog = lircnav - button = Ch+ - config = up - end - - begin - prog = lircnav - button = Ch- - config = down - end - - begin - prog = lircnav - button = Ok - config = select - end - - begin - prog = lircnav - button = Power - config = quit - end - diff --git a/abs/core-testing/system-templates/templates/remotes/hauppauge-grey/preview.jpg b/abs/core-testing/system-templates/templates/remotes/hauppauge-grey/preview.jpg Binary files differdeleted file mode 100644 index 19acba3..0000000 --- a/abs/core-testing/system-templates/templates/remotes/hauppauge-grey/preview.jpg +++ /dev/null |
