1 files changed, 0 insertions, 486 deletions
diff --git a/abs/core-testing/wlan-ng26-utils/tmp/trunk/Configure b/abs/core-testing/wlan-ng26-utils/tmp/trunk/Configure
deleted file mode 100755
index 7b62dd2..0000000
--- a/abs/core-testing/wlan-ng26-utils/tmp/trunk/Configure
+++ /dev/null
@@ -1,486 +0,0 @@
-#!/bin/bash
-#
-# Configure
-#
-# linux-wlan Open Sourc Project
-#
-# Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
-# -------------------------------------------------------------------------
-#
-# Inquiries regarding the linux-wlan Open Source Project can be
-# made directly to:
-#
-# AbsoluteValue Systems Inc.
-# info@linux-wlan.com
-# http://www.linux-wlan.com
-#
-# -------------------------------------------------------------------------
-# TODO: Since we're dependent on configured pcmcia source, we should change 
-#       this such that it will ask for the pcmcia source dir and then read
-#       all our stuff from pcmcia/config.mk.  Would simplify alot of things.
-# -------------------------------------------------------------------------
-#
-# This script adapted from the pcmcia-cs/Configure file, license statement below:
-#
-# pcmcia-cs/Configure 1.110 1999/06/24 17:37:36
-#
-# The contents of this file are subject to the Mozilla Public License
-# Version 1.0 (the "License"); you may not use this file except in
-# compliance with the License. You may obtain a copy of the License at
-# http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS IS"
-# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
-# the License for the specific language governing rights and
-# limitations under the License.
-#
-# The initial developer of the Configure code is David A. Hinds
-# <dhinds@hyper.stanford.edu>.  Portions created by David A. Hinds
-# are Copyright (C) 1998 David A. Hinds.  All Rights Reserved.
-#-------------------------------------------------------------------------
-
-ECHO="/bin/echo -e "
-fail ()
-{
-	$ECHO ""
-	$ECHO "Configuration failed"
-	$ECHO ""
-	exit 1
-}
-
-usage () {
-    $ECHO "usage: Configure [-h|help|-d [filename]|-f <filename>]"
-    $ECHO ""
-    $ECHO "  -h|help       - display usage info"
-    $ECHO "  -d [filename] - automated configuration with option to specify input file"
-    $ECHO "  -f <filename> - read configuration data from file and prompt user"
-    exit 1
-}
-
-if [ ! -r config.in ]; then
-    $ECHO "config.in does not exist!"
-    fail
-fi
-
-. ./config.in
-
-if [ -r config.out ]; then
-    . ./config.out 2>/dev/null
-fi
-
-PROMPT=y
-if [ $# -gt 0 ] ; then
-	if [ "$1" = "-h" -o "$1" = "help" ] ; then 
-		usage
-	fi
-	if [ "$1" = "-d" -o "$1" = "-f" ] ; then 
-		if [ $# -gt 1 ] ; then
-			if [ -r $2 ]; then
-				. $2
-			else
-				$ECHO "$2 does not exist"
-				fail
-			fi
-		else
-			if [ "$1" = "-f" ] ; then 
-				usage
-			fi
-		fi
-		if [ "$1" = "-d" ] ; then 
-			PROMPT=n
-		fi
-	fi
-fi
-
-#=======================================================================
-
-CONFIG=config.new
-CONFIG_MK=config.mk
-rm -f $CONFIG $CONFIG_MK $MODVER
-
-cat << 'EOF' > $CONFIG
-#
-# Automatically generated by 'make config' -- don't edit!
-#
-EOF
-
-write_bool() {
-    value=`eval $ECHO '$'$1`
-    if [ "$value" = "y" ] ; then
-	$ECHO "$1=y" >> $CONFIG
-	$ECHO "$1=y" >> $CONFIG_MK
-    else
-	$ECHO "$1=n" >> $CONFIG
-	$ECHO "# $1 is not defined" >> $CONFIG_MK
-    fi
-}
-
-write_str () {
-    value=`eval $ECHO '$'$1`
-    $ECHO "$1"=\"$value\" >> $CONFIG
-    $ECHO "$1=$value" >> $CONFIG_MK
-}
-
-
-dump_str () {
-    $ECHO "$1" >> $CONFIG
-    $ECHO "$1" >> $CONFIG_MK
-}
-
-prompt () {
-    eval $3=\"$2\"
-    if [ "$PROMPT" = "y" ] ; then
-	$ECHO "$1 [$2]: \c"
-	read tmp
-	if [ -n "$tmp" ] ; then eval $3=\"$tmp\" ; fi
-    else
-	$ECHO "$1 [$2]"
-    fi
-}
-
-ask_bool () {
-    default=`eval $ECHO '$'$2`
-    if [ ! "$default" ] ; then default=n ; fi
-    answer=""
-    while [ "$answer" != "n" -a "$answer" != "y" ] ; do
-	prompt "$1 (y/n)" "$default" answer
-    done
-    eval "$2=$answer"
-    write_bool $2
-}
-
-ask_str () {
-    default=`eval $ECHO '$'$2`
-    prompt "$1" "`$ECHO $default`" answer
-    eval $2=\"$answer\"
-    write_str $2
-}
-
-mkversionh () {
-versionh=src/include/wlan/version.h 
-cp src/version.h.in $versionh
-
-DATE=`date`
-
-printf '#define WLAN_RELEASE\t"%d.%d.%d%s"\n' \
-        ${WLAN_VERSION} \
-        ${WLAN_PATCHLEVEL} \
-        ${WLAN_SUBLEVEL} \
-        ${WLAN_EXTRAVERSION} >> $versionh
-printf '#define WLAN_RELEASE_CODE 0x%02x%02x%02x\n' \
-        ${WLAN_VERSION} \
-        ${WLAN_PATCHLEVEL} \
-        ${WLAN_SUBLEVEL} >> $versionh
-echo   "#define WLAN_BUILD_DATE \"$DATE\" " >> $versionh
-
-printf '\n' >> $versionh
-printf '#endif\n' >> $versionh
-
-}
-
-#=======================================================================
-
-# If the src/include/wlan/version.h file needs a touchup, fix or create it
-if [ -r src/include/wlan/version.h ]; then
-	WLAN_RELEASE="${WLAN_VERSION}.${WLAN_PATCHLEVEL}.${WLAN_SUBLEVEL}${WLAN_EXTRAVERSION}"
-	OLD_RELEASE=`sed --quiet -e '/#define.*WLAN_RELEASE[^_].*\"\(.*\)\"/s//\1/p' < src/include/wlan/version.h`
-	if [ "${WLAN_RELEASE}" != "${OLD_RELEASE}" ]; then
-		# Overwrite the file
-		mkversionh
-	fi
-else
-	# File doesn't exist, create it
-	mkversionh
-fi
-
-$ECHO ""
-$ECHO "-------------- Linux WLAN Configuration Script -------------"
-$ECHO ""
-$ECHO "The default responses are correct for most users."
-$ECHO ""
-
-#=======================================================================
-# Should we build for PCMCIA Card Services?
-
-ask_bool "Build Prism2.x PCMCIA Card Services (_cs) driver?" PRISM2_PCMCIA
-
-#=======================================================================
-# Should we build for PLX9052 based PCI adapters?
-
-ask_bool "Build Prism2 PLX9052 based PCI (_plx) adapter driver?" PRISM2_PLX
-#=======================================================================
-# Should we build for Prism2 native PCI?
-
-ask_bool "Build Prism2.5 native PCI (_pci) driver?" PRISM2_PCI
-
-#=======================================================================
-# Should we build for Prism2.5 USB?
-
-ask_bool "Build Prism2.5 USB (_usb) driver?" PRISM2_USB
-
-$ECHO ""
-
-#=======================================================================
-# Collect the kernel source tree and test for sanity
-
-CUR_RELEASE=`uname -r`
-
-if [ "$LINUX_SRC" = "" ] ; then
-    LINUX_SRC=/lib/modules/$CUR_RELEASE/build
-fi
-
-ask_str "Linux source directory" LINUX_SRC
-
-if [ ! -f $LINUX_SRC/include/linux/version.h ] ; then
-	$ECHO "Linux source tree $LINUX_SRC is incomplete or missing!"
-	if [ -d $LINUX_SRC/include/linux ] ; then
-	$ECHO "    The kernel header files are present, but not " \
-		"the full source code."
-	fi
-	$ECHO "    See the HOWTO for a list of FTP sites for current" \
-	 "kernel sources."
-	fail
-fi
-
-KERNEL_SOURCE=$LINUX_SRC make -Cscripts 2>&1 > /dev/null
-. scripts/make.opts
-
-# What kernel are we compiling for?
-
-version () {
-	expr $1 \* 65536 + $2 \* 256 + $3
-}
-
-$ECHO ""
-
-SRC_RELEASE="$KERNEL_RELEASE"
-
-VERSION_CODE=`grep LINUX_VERSION_CODE $LINUX_SRC/include/linux/version.h | \
-    sed -e 's/[^0-9]//g'`
-
-$ECHO "The kernel source tree is version $SRC_RELEASE."
-if [ $VERSION_CODE -lt `version 2 4 0` ] ; then
-	$ECHO "This package requires at least a 2.4.x series kernel."
-	fail
-fi
-
-if [ $VERSION_CODE -gt `version 2 5 0` ] ; then
-        KERN_25=y
-        write_bool KERN_25
-fi
-if [ $VERSION_CODE -ge `version 2 6 5` ] ; then
-    KERN_2_6_5=y
-fi
-write_bool KERN_2_6_5
-if [ $VERSION_CODE -ge `version 2 6 17` ] ; then
-    KERN_2_6_17=y
-fi
-write_bool KERN_2_6_17
-
-if [ $VERSION_CODE -gt `version 2 6 26` ] ; then
-    $ECHO "******* WARNING WARNING WARNING *******"
-    $ECHO "Kernels newer than 2.6.26.x are not supported."
-    $ECHO "******* WARNING WARNING WARNING *******"
-fi
-
-if [ "$SRC_RELEASE" != "$CUR_RELEASE" ] ; then
-	$ECHO "WARNING: the current running kernel is actually version $CUR_RELEASE."
-fi
-
-if [ ! -f $LINUX_SRC/.config ] ; then
-    $ECHO "WARNING: .config not present in kernel source tree.  This will"
-    $ECHO "         screw up modversions detection and build optimizations."
-    $ECHO "         Is this a RedHat kernel? Workarounds enabled." 
-    if [ -f $LINUX_SRC/include/linux/modversions.h ] ; then
-	KERNEL_MODFLAGS="-DMODULE -DMODVERSIONS -include $LINUX_SRC/include/linux/modversions.h"
-    fi
-    $ECHO "         For an optimized build, copy over the relevent file from"
-    $ECHO "         $LINUX_SRC/configs/ to $LINUX_SRC/.config"
-fi
-
-# Check for consistent kernel build dates
-CUR_D=`uname -v | sed -e 's/^#[0-9]* //;s/SMP //;s/PREEMPT //;'`
-CUR_D=`$ECHO $CUR_D | sed -e 's/\(:[0-9][0-9]\) .* \([12][90]\)/\1 \2/'`
-$ECHO "The current kernel build date is $CUR_D."
-UTS_VERSION="unknown";
-if [ -f $LINUX_SRC/include/linux/compile.h ] ; then
-	UTS_VERSION=`grep UTS_VERSION $LINUX_SRC/include/linux/compile.h |
-	sed -e 's/.*"\(.*\)"/\1/'`
-	SRC_D=`$ECHO $UTS_VERSION | sed -e 's/^#[0-9]* //;s/SMP //;s/PREEMPT //;'`
-	SRC_D=`$ECHO $SRC_D | sed -e 's/\(:[0-9][0-9]\) .* \([12][90]\)/\1 \2/'`
-	if [ $SRC_RELEASE = $CUR_RELEASE -a "$SRC_D" != "$CUR_D" ] ; then
-	$ECHO "WARNING: the source tree has a build date of $SRC_D."
-	if [ `date -d "$SRC_D" +%s` -gt `date -d "$CUR_D" +%s` ] ; then
-		$ECHO "   Did you forget to install your new kernel?!?"
-	fi
-	fi
-fi
-$ECHO ""
-
-	# Test for netlink availability in the kernel
-	if grep -sq "#define.*CONFIG_NETLINK.*1" ${LINUX_SRC}/include/linux/autoconf.h; then
-		CONFIG_NETLINK=y
-	else
-		CONFIG_NETLINK=n
-	fi
-	write_bool CONFIG_NETLINK
-
-
-	# Test for pf_packet availability in the kernel
-	if grep -sq "#define.*CONFIG_PACKET.*1" ${LINUX_SRC}/include/linux/autoconf.h; then
-		CONFIG_PACKET=y
-	else
-		CONFIG_PACKET=n
-	fi
-	write_bool CONFIG_PACKET
-
-
-	# Test for pf_packet availability in the kernel
-	if grep -sq "#define.*CONFIG_HOTPLUG.*1" ${LINUX_SRC}/include/linux/autoconf.h; then
-		CONFIG_HOTPLUG=y
-	else
-		CONFIG_HOTPLUG=n
-	fi
-	write_bool CONFIG_HOTPLUG
-
-#=======================================================================
-# Alternate target install root dir - the value of this variable
-# will prefix other variables, such as modules and pcmcia directories
-ask_str "Alternate target install root directory on host" TARGET_ROOT_ON_HOST
-
-if [ $PRISM2_PCMCIA = "y" ] ; then
-	# PCMCIA script dir
-	ask_str "PCMCIA script directory" PCMCIA_DIR
-	TARGET_PCMCIA_DIR=$TARGET_ROOT_ON_HOST$PCMCIA_DIR
-	write_str TARGET_PCMCIA_DIR
-fi
-
-MODDIR=/lib/modules/$SRC_RELEASE
-ask_str "  Module install directory" MODDIR
-TARGET_MODDIR=$TARGET_ROOT_ON_HOST$MODDIR/linux-wlan-ng
-write_str TARGET_MODDIR
-$ECHO ""
-
-
-# Just write some out (we're not prompting right now)
-write_str INST_EXEDIR
-TARGET_INST_EXEDIR=$TARGET_ROOT_ON_HOST$INST_EXEDIR
-write_str TARGET_INST_EXEDIR
-
-#=======================================================================
-
-# How should the startup scripts be configured?
-
-SYSV_INIT=n
-if [ "$PREFIX" = "" ] ; then
-	if [ -d /etc/rc.d/init.d -o -d /etc/init.d -o -d /sbin/init.d ] ; then
-	$ECHO "It looks like you have a System V init file setup."
-	SYSV_INIT=y
-	if [ -d /etc/rc.d/init.d ] ; then
-		$ECHO "RC_DIR=/etc/rc.d" >> $CONFIG
-		$ECHO "RC_DIR=/etc/rc.d" >> $CONFIG_MK
-	elif [ -d /sbin/init.d ] ; then
-		$ECHO "RC_DIR=/sbin" >> $CONFIG
-		$ECHO "RC_DIR=/sbin" >> $CONFIG_MK
-	else
-		$ECHO "RC_DIR=/etc" >> $CONFIG
-		$ECHO "RC_DIR=/etc" >> $CONFIG_MK
-	fi
-	else
-	$ECHO "It looks like you have a BSD-ish init file setup."
-	if ! grep rc.wlan /etc/rc.d/rc.S >/dev/null ; then
-		$ECHO "    You'll need to edit /etc/rc.d/rc.S to invoke" \
-		 "/etc/rc.d/rc.wlan (for ISA/PCMCIA cards)"
-		$ECHO "    so that wlan cards will be started at boot time."
-	fi
-	SYSV_INIT=n
-	fi
-	write_bool SYSV_INIT
-else
-	ask_bool "System V init script layout" SYSV_INIT
-	if [ "$SYSV_INIT" = "y" ] ; then
-	ask_str "Top-level directory for RC scripts" RC_DIR
-	fi
-fi
-
-if [ ! -x $TARGET_ROOT_ON_HOST/sbin/depmod ] ; then INSTALL_DEPMOD=n ; fi
-write_bool INSTALL_DEPMOD
-
-$ECHO ""
-
-#=======================================================================
-# Make sure our target architecture is correct
-
-$ECHO ""
-
-ask_str "Prefix for build host compiler? (rarely needed)" HOST_COMPILE
-dump_str "HOST_CFLAGS=$HOST_CFLAGS"
-
-$ECHO ""
-
-dump_str 'HOST_AS=$(HOST_COMPILE)as'
-dump_str 'HOST_LD=$(HOST_COMPILE)ld'
-dump_str 'HOST_CC=$(HOST_COMPILE)gcc'
-dump_str 'HOST_CPP=$(HOST_CC) -E'
-dump_str 'HOST_AR=$(HOST_COMPILE)ar'
-dump_str 'HOST_NM=$(HOST_COMPILE)nm'
-dump_str 'HOST_STRIP=$(HOST_COMPILE)strip'
-dump_str 'HOST_OBJCOPY=$(HOST_COMPILE)objcopy'
-dump_str 'HOST_OBJDUMP=$(HOST_COMPILE)objdump'
-dump_str 'HOST_RANLIB=$(HOST_COMPILE)ranlib'
-dump_str 'HOST_MAKE=make'
-
-CROSS_COMPILE_ENABLED=y
-if [ "_$CROSS_COMPILE" = "_" ] ; then
-CROSS_COMPILE_ENABLED=n
-fi
-
-write_str CROSS_COMPILE
-write_bool CROSS_COMPILE_ENABLED
-#dump_str 'CFLAGS=-O2 -Wall -Wstrict-prototypes -pipe'
-
-if [ "_$CROSS_COMPILE" = "_" ] ; then
-dump_str 'AS=$(HOST_COMPILE)as'
-dump_str 'LD=$(HOST_COMPILE)ld'
-dump_str 'CC=$(HOST_COMPILE)gcc'
-dump_str 'CPP=$(HOST_CC) -E'
-dump_str 'AR=$(HOST_COMPILE)ar'
-dump_str 'NM=$(HOST_COMPILE)nm'
-dump_str 'STRIP=$(HOST_COMPILE)strip'
-dump_str 'OBJCOPY=$(HOST_COMPILE)objcopy'
-dump_str 'OBJDUMP=$(HOST_COMPILE)objdump'
-dump_str 'RANLIB=$(HOST_COMPILE)ranlib'
-dump_str 'MAKE=make'
-else
-dump_str "AS=$CROSS_COMPILE"as
-dump_str "LD=$CROSS_COMPILE"ld
-dump_str "CC=$CROSS_COMPILE"gcc
-CC="$CROSS_COMPILE"gcc
-dump_str "CPP=$CC -E"
-dump_str "AR=$CROSS_COMPILE"ar
-dump_str "NM=$CROSS_COMPILE"nm
-dump_str "STRIP=$CROSS_COMPILE"strip
-dump_str "OBJCOPY=$CROSS_COMPILE"objcopy
-dump_str "OBJDUMP=$CROSS_COMPILE"objdump
-dump_str "RANLIB=$CROSS_COMPILE"ranlib
-dump_str "MAKE=make"
-fi
-
-#=======================================================================
-# Should we build for debugging?
-
-ask_bool "Build for debugging (see doc/config.debug)" WLAN_DEBUG
-
-$ECHO ""
-
-FIRMWARE_DIR="/etc/wlan/"
-write_str FIRMWARE_DIR
-
-WLAN_SRC=`pwd`/src/
-write_str WLAN_SRC
-
-mv $CONFIG config.out
-
-$ECHO ""
-$ECHO "Configuration successful.  Now type 'make' and pray."
-$ECHO ""