diff options
Diffstat (limited to 'abs/core-testing/wlan-ng26-utils/tmp/trunk/etc/pcmcia/.svn/text-base')
3 files changed, 0 insertions, 475 deletions
diff --git a/abs/core-testing/wlan-ng26-utils/tmp/trunk/etc/pcmcia/.svn/text-base/Makefile.svn-base b/abs/core-testing/wlan-ng26-utils/tmp/trunk/etc/pcmcia/.svn/text-base/Makefile.svn-base deleted file mode 100644 index e9f612f..0000000 --- a/abs/core-testing/wlan-ng26-utils/tmp/trunk/etc/pcmcia/.svn/text-base/Makefile.svn-base +++ /dev/null @@ -1,81 +0,0 @@ -# etc/pcmcia/Makefile -# -# Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. -# -------------------------------------------------------------------- -# -# linux-wlan -# -# The contents of this file are subject to the Mozilla Public -# License Version 1.1 (the "License"); you may not use this file -# except in compliance with the License. You may obtain a copy of -# the License at http://www.mozilla.org/MPL/ -# -# Software distributed under the License is distributed on an "AS -# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -# implied. See the License for the specific language governing -# rights and limitations under the License. -# -# Alternatively, the contents of this file may be used under the -# terms of the GNU Public License version 2 (the "GPL"), in which -# case the provisions of the GPL are applicable instead of the -# above. If you wish to allow the use of your version of this file -# only under the terms of the GPL and not to allow others to use -# your version of this file under the MPL, indicate your decision -# by deleting the provisions above and replace them with the notice -# and other provisions required by the GPL. If you do not delete -# the provisions above, a recipient may use your version of this -# file under either the MPL or the GPL. -# -# -------------------------------------------------------------------- -# -# Inquiries regarding the linux-wlan Open Source project can be -# made directly to: -# -# AbsoluteValue Systems Inc. -# info@linux-wlan.com -# http://www.linux-wlan.com -# -# -------------------------------------------------------------------- -# -# Portions of the development of this software were funded by -# Intersil Corporation as part of PRISM(R) chipset product development. -# -# -------------------------------------------------------------------- - --include ../../config.mk - -all: - @echo "Nothing to do" - -clean: - @echo "Nothing to do" - -ifeq ($(PRISM2_PCMCIA), y) - -install: - mkdir -p $(TARGET_PCMCIA_DIR) ; \ - if [ -f $(TARGET_PCMCIA_DIR)/wlan-ng ]; then \ - mv -f $(TARGET_PCMCIA_DIR)/wlan-ng $(TARGET_PCMCIA_DIR)/wlan-ng.O ; \ - fi ; \ - cp wlan-ng $(TARGET_PCMCIA_DIR) ; \ - chmod +x $(TARGET_PCMCIA_DIR)/wlan-ng ; \ - if [ -f $(TARGET_PCMCIA_DIR)/wlan-ng.conf ]; then \ - mv -f $(TARGET_PCMCIA_DIR)/wlan-ng.conf $(TARGET_PCMCIA_DIR)/wlan-ng.conf.O ; \ - fi ; \ - cp wlan-ng.conf $(TARGET_PCMCIA_DIR) ; \ - if [ -f $(TARGET_PCMCIA_DIR)/config ]; then \ - if ! grep -sq 'source.*\.\/\*\.conf$$' $(TARGET_PCMCIA_DIR)/config ; then \ - if ! grep -sq 'source \.\/wlan-ng.conf' $(TARGET_PCMCIA_DIR)/config ; then \ - mv -f $(TARGET_PCMCIA_DIR)/config $(TARGET_PCMCIA_DIR)/config.O ; \ - ( echo "source ./wlan-ng.conf"; cat $(TARGET_PCMCIA_DIR)/config.O) > $(TARGET_PCMCIA_DIR)/config ; \ - fi ; \ - fi ; \ - fi - -else - -install: - @echo "Nothing to do" - -endif - diff --git a/abs/core-testing/wlan-ng26-utils/tmp/trunk/etc/pcmcia/.svn/text-base/wlan-ng.conf.svn-base b/abs/core-testing/wlan-ng26-utils/tmp/trunk/etc/pcmcia/.svn/text-base/wlan-ng.conf.svn-base deleted file mode 100644 index 25e5db9..0000000 --- a/abs/core-testing/wlan-ng26-utils/tmp/trunk/etc/pcmcia/.svn/text-base/wlan-ng.conf.svn-base +++ /dev/null @@ -1,190 +0,0 @@ - -device "prism2_cs" - class "wlan-ng" module "prism2_cs" - -card "Intersil PRISM2 Reference Design 11Mb/s 802.11b WLAN Card" - version "INTERSIL", "HFA384x/IEEE" - bind "prism2_cs" - -card "Compaq WL100/200 11Mb/s 802.11b WLAN Card" - manfid 0x0138, 0x0002 - bind "prism2_cs" - -card "Compaq iPaq HNW-100 11Mb/s 802.11b WLAN Card" - manfid 0x028a, 0x0002 - bind "prism2_cs" - -card "Samsung SWL2000-N 11Mb/s 802.11b WLAN Card" - manfid 0x0250, 0x0002 - bind "prism2_cs" - -card "Z-Com XI300 11Mb/s 802.11b WLAN Card" - manfid 0xd601, 0x0002 - bind "prism2_cs" - -card "ZoomAir 4100 11Mb/s 802.11b WLAN Card" - version "ZoomAir 11Mbps High", "Rate wireless Networking" - bind "prism2_cs" - -card "Linksys WPC11 11Mbps 802.11b WLAN Card" - version "Instant Wireless ", " Network PC CARD", "Version 01.02" - bind "prism2_cs" - -card "Addtron AWP-100 11Mbps 802.11b WLAN Card" - version "Addtron", "AWP-100 Wireless PCMCIA", "Version 01.02" - bind "prism2_cs" - -card "D-Link DWL-650 11Mbps 802.11b WLAN Card" - version "D", "Link DWL-650 11Mbps WLAN Card", "Version 01.02" - bind "prism2_cs" - -card "SMC 2632W 11Mbps 802.11b WLAN Card" - version "SMC", "SMC2632W", "Version 01.02" - bind "prism2_cs" - -card "BroMax Freeport 11Mbps 802.11b WLAN Card (Prism 2.5)" - version "Intersil", "PRISM 2_5 PCMCIA ADAPTER", "ISL37300P", "Eval-RevA" - bind "prism2_cs" - -card "U.S. Robotics IEEE 802.11b PC-CARD" - version "U.S. Robotics", "IEEE 802.11b PC-CARD", "Version 01.02" - bind "prism2_cs" - -card "Level-One WPC-0100" - version "Digital Data Communications", "WPC-0100" - bind "prism2_cs" - -card "Bromax OEM 11Mbps 802.11b WLAN Card (Prism 2.5)" - manfid 0x0274, 0x1612 - bind "prism2_cs" - -card "Bromax OEM 11Mbps 802.11b WLAN Card (Prism 3)" - manfid 0x0274, 0x1613 - bind "prism2_cs" - -card "corega K.K. Wireless LAN PCC-11" - version "corega K.K.", "Wireless LAN PCC-11" - bind "prism2_cs" - -card "corega K.K. Wireless LAN PCCA-11" - version "corega K.K.", "Wireless LAN PCCA-11" - bind "prism2_cs" - -card "CONTEC FLEXSCAN/FX-DDS110-PCC" - manfid 0xc001, 0x0008 - bind "prism2_cs" - -card "PLANEX GeoWave/GW-NS110" - version "PLANEX", "GeoWave/GW-NS110" - bind "prism2_cs" - -card "Ambicom WL1100 11Mbps 802.11b WLAN Card" - version "OEM", "PRISM2 IEEE 802.11 PC-Card", "Version 01.02" - bind "prism2_cs" - -card "LeArtery SYNCBYAIR 11Mbps 802.11b WLAN Card" - version "LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", "Version 01.02" - bind "prism2_cs" - -card "Intermec MobileLAN 11Mbps 802.11b WLAN Card" - manfid 0x01ff, 0x0008 - bind "prism2_cs" - -card "NETGEAR MA401 11Mbps 802.11 WLAN Card" - version "NETGEAR MA401 Wireless PC", "Card", "Version 01.00" - bind "prism2_cs" - -card "Intersil PRISM Freedom 11mbps 802.11 WLAN Card" - version "Intersil", "PRISM Freedom PCMCIA Adapter", "ISL37100P", "Eval-RevA" - bind "prism2_cs" - -card "OTC Wireless AirEZY 2411-PCC 11Mbps 802.11 WLAN Card" - version "OTC", "Wireless AirEZY 2411-PCC WLAN Card", "Version 01.02" - bind "prism2_cs" - -card "Dynalink L11HDT 11Mbps 802.11 WLAN Card" - version "802.11", "11Mbps Wireless LAN Card", "v08C1", "" - manfid 0xc250, 0x0002 - bind "prism2_cs" - -card "PROXIM RangeLAN-DS/LAN PC CARD" - version "PROXIM", "RangeLAN-DS/LAN PC CARD" - bind "prism2_cs" - -card "ACTIONTEC PRISM Wireless LAN PC Card" - version "ACTIONTEC", "PRISM Wireless LAN PC Card", "0381", "RevA" - manfid 0x1668, 0x0101 - bind "prism2_cs" - -card "3Com AirConnect 3CRWE737A" - version "3Com", "3CRWE737A AirConnect Wireless LAN PC Card" - bind "prism2_cs" - -card "3Com AirConnect 3CRWE777A" - version "3Com", "3CRWE777A AirConnect Wireless LAN PCI Card" - bind "prism2_cs" - -card "ASUS WL-100 802.11b WLAN PC Card" - version "ASUS", "802_11b_PC_CARD_25" - bind "prism2_cs" - -card "ASUS WL-110 802.11b WLAN CF Card" - version "ASUS", "802_11B_CF_CARD_25" - bind "prism2_cs" - -card "BUFFALO WLI-CF-S11G 802.11b WLAN Card" - version "BUFFALO", "WLI-CF-S11G" - bind "prism2_cs" - -card "Linksys WCF11 11Mbps 802.11b WLAN Card (Prism 2.5)" - version "The Linksys Group, Inc.", "Wireless Network CF Card", "ISL37300P", "RevA" - bind "prism2_cs" - -card "Linksys WCF12 11Mbps 802.11b WLAN Card (Prism 3)" - version "Linksys", "Wireless CompactFlash Card", "", "" - manfid 0x028a, 0x0673 - bind "prism2_cs" - -card "NETGEAR MA401RA 11Mbps 802.11 WLAN Card" - version "NETGEAR MA401RA Wireless PC", "Card", "ISL37300P", "Eval-RevA" - bind "prism2_cs" - -card "D-Link DCF-660W 11Mbps 802.11b WLAN Card" - manfid 0xd601, 0x0005 - bind "prism2_cs" - -card "Microsoft Wireless Notebook Adapter MN-520" - manfid 0x02d2, 0x0001 - bind "prism2_cs" - -card "AnyPoint(TM) Wireless II PC Card" - manfid 0x0089, 0x0002 - bind "prism2_cs" - -card "D-Link DRC-650 802.11b WLAN Card" - version "D", "Link DRC-650 11Mbps WLAN Card", "Version 01.02", "" - bind "prism2_cs" - -card "Adaptec AWN-8030" - manfid 0x9005, 0x0021 - bind "prism2_cs" - -card "D-Link DWL-650 rev P 802.11b WLAN card" - manfid 0x000b, 0x7110 -# version "D-Link", "DWL-650 Wireless PC Card RevP", "ISL37101P-10", "A3" - bind "prism2_cs" - -card "I-Gate 11M PC Card" - version "INTERSIL", "I-GATE 11M PC Card / PC Card plus", "Version 01.02" - bind "prism2_cs" - -card "benQ AWL100 802.11b WLAN Card" - version "BENQ", "AWL100 PCMCIA ADAPTER", "ISL37300P", "Eval-RevA" - manfid 0x000b, 0x7300 - bind "prism2_cs" - -card "Intersil Prism 2 card" - version "INTERSIL" - manfid 0x0156, 0x0002 - bind "prism2_cs" - diff --git a/abs/core-testing/wlan-ng26-utils/tmp/trunk/etc/pcmcia/.svn/text-base/wlan-ng.svn-base b/abs/core-testing/wlan-ng26-utils/tmp/trunk/etc/pcmcia/.svn/text-base/wlan-ng.svn-base deleted file mode 100644 index 76b63cd..0000000 --- a/abs/core-testing/wlan-ng26-utils/tmp/trunk/etc/pcmcia/.svn/text-base/wlan-ng.svn-base +++ /dev/null @@ -1,204 +0,0 @@ -#! /bin/sh -# -# etc/pcmcia/wlan-ng -# -# Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. -# -------------------------------------------------------------------- -# -# linux-wlan -# -# The contents of this file are subject to the Mozilla Public -# License Version 1.1 (the "License"); you may not use this file -# except in compliance with the License. You may obtain a copy of -# the License at http://www.mozilla.org/MPL/ -# -# Software distributed under the License is distributed on an "AS -# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -# implied. See the License for the specific language governing -# rights and limitations under the License. -# -# Alternatively, the contents of this file may be used under the -# terms of the GNU Public License version 2 (the "GPL"), in which -# case the provisions of the GPL are applicable instead of the -# above. If you wish to allow the use of your version of this file -# only under the terms of the GPL and not to allow others to use -# your version of this file under the MPL, indicate your decision -# by deleting the provisions above and replace them with the notice -# and other provisions required by the GPL. If you do not delete -# the provisions above, a recipient may use your version of this -# file under either the MPL or the GPL. -# -# -------------------------------------------------------------------- -# -# Inquiries regarding the linux-wlan Open Source project can be -# made directly to: -# -# AbsoluteValue Systems Inc. -# info@linux-wlan.com -# http://www.linux-wlan.com -# -# -------------------------------------------------------------------- -# -# Portions of the development of this software were funded by -# Intersil Corporation as part of PRISM(R) chipset product development. -# -# -------------------------------------------------------------------- - - -# [MSM]: Moved here because wlan/shared may is intended to be used by -# other scripts -wlan_usage () -{ - echo "usage: wlan-ng [action] [device name] [debug]" - echo " actions: start|resume, stop|suspend, check|cksum|restart" - echo " debug : enables shell debug" - exit 1 -} - -if [ "$3" = "debug" ]; then set -x ; fi - -# Note: this 'shared' comes with the WLAN package -if [ ! -f /etc/wlan/shared ] ; then - echo "/etc/wlan/shared not present" - exit 0 -fi - -. /etc/wlan/shared - -# [MSM]: This test supplied by rlazarev, it's commented out due to pcmcia -# stab file movement. This test needs to be 'functionized' and made a -# little more robust. -#if [ ! -f /var/run/stab ] ; then -# echo "Error: Possibly PCMCIA CS is not started"; -# wlan_usage; -# exit 1; -#fi - -# If number of args is less than 2 display usage -if [ $# -lt 2 ]; then wlan_usage ; fi - -# Note: this 'shared' comes with the PCMCIA package -# ACTION=$1 and DEVICE=$2 are assigned in pcmcia/shared -if [ -f /etc/pcmcia/shared ] ; then . /etc/pcmcia/shared ; fi - -# XXXX we can do stuff with $SCHEME still..? -case "$ACTION" in - -'start'|'resume') - #=======ENABLE======================================== - # Do we want to init the card at all? - eval 'WLAN_ENABLE=$ENABLE_'$DEVICE - - if ! is_true $WLAN_ENABLE ; then - exit 0 - fi - - if is_true $WLAN_DOWNLOAD; then - wlan_download $DEVICE - fi - - wlan_enable $DEVICE - - #=======MAC STARTUP========================================= - wlan_supports_scan $DEVICE - if [ $? = 0 ] ; then - wlan_scan $DEVICE - if [ $? = 0 ] ; then - wlan_source_config_for_ssid "$ssid" "$bssid" - - wlan_user_mibs $DEVICE - wlan_wep $DEVICE - - grep 'autojoin' /proc/net/p80211/$DEVICE/wlandev > /dev/null - if [ $? = 0 ]; then - wlan_infra $DEVICE - else - wlan_dot11_join $DEVICE - fi - else - echo "network not found. maybe start IBSS?" - fi - else - wlan_source_config $DEVICE - - wlan_user_mibs $DEVICE - wlan_wep $DEVICE - - if is_true $IS_ADHOC ; then - wlan_adhoc $DEVICE - else - wlan_infra $DEVICE - fi - fi - - # ==========PCMCIA NETDEVICE============================= - # Append the SSID to the pcmcia scheme name - wlan_set_ssid_schemefile "$WLAN_SCHEMESSID" - - # Call the normal network initialization - ./network $1 $2 - if [ $? = 1 ] ; then -# echo "/etc/pcmcia/network $1 $2 failed." - wlan_restore_schemefile - exit 1 - fi - - # Restore scheme file to it's prior contents - wlan_restore_schemefile - ;; - -'stop'|'suspend') - - # ==========PCMCIA NETDEVICE============================= - # Append the SSID to the pcmcia scheme name - wlan_set_ssid_schemefile "$DesiredSSID" - - # Call the normal network initialization - ./network $1 $2 - if [ $? = 1 ] ; then -# echo "/etc/pcmcia/network $1 $2 failed." - wlan_restore_schemefile - exit 1 - fi - - #=======DISABLE IFSTATE============================= - # Take the device down to a quiescent state. - wlan_disable $DEVICE - - # Restore scheme file to it's prior contents - wlan_restore_schemefile - ;; - -'check'|'cksum'|'restart') - # ==========STA ==================================== - # Just passes through for normal network device - # behavior. - if is_true $IS_ADHOC; then - WLAN_SCHEMESSID="$SSID" - else - WLAN_SCHEMESSID="$DesiredSSID" - fi - - # ==========PCMCIA NETDEVICE============================= - # Append the SSID to the pcmcia scheme name - wlan_set_ssid_schemefile "$WLAN_SCHEMESSID" - - # Call the normal network initialization - ./network $1 $2 $3:$WLAN_SCHEMESSID - if [ $? = 1 ] ; then -# echo "/etc/pcmcia/network $1 $2 $3 failed." - wlan_restore_schemefile - exit 1 - fi - - # Restore scheme file to it's prior contents - wlan_restore_schemefile - ;; - -*) - usage - ;; - -esac - -exit 0 |