summaryrefslogtreecommitdiffstats
path: root/abs/core/linhes-live
diff options
context:
space:
mode:
Diffstat (limited to 'abs/core/linhes-live')
-rw-r--r--abs/core/linhes-live/PKGBUILD32
-rwxr-xr-xabs/core/linhes-live/bin/gen_fstab122
-rwxr-xr-xabs/core/linhes-live/bin/km76
-rw-r--r--abs/core/linhes-live/etc/live-shutdown90
-rw-r--r--abs/core/linhes-live/etc/live-sysinit73
-rwxr-xr-xabs/core/linhes-live/etc/loginroot3
-rwxr-xr-xabs/core/linhes-live/etc/rc.shutdown-live168
-rwxr-xr-xabs/core/linhes-live/etc/rc.sysinit-live469
-rwxr-xr-xabs/core/linhes-live/etc/ulogin57
-rwxr-xr-xabs/core/linhes-live/lib/initcpio/gen_larch_init12
-rw-r--r--abs/core/linhes-live/lib/initcpio/hooks/larch1125
-rw-r--r--abs/core/linhes-live/lib/initcpio/hooks/larch233
-rw-r--r--abs/core/linhes-live/lib/initcpio/hooks/larch2_aufs33
-rw-r--r--abs/core/linhes-live/lib/initcpio/hooks/larch3196
-rw-r--r--abs/core/linhes-live/lib/initcpio/install/larch115
-rw-r--r--abs/core/linhes-live/lib/initcpio/install/larch215
-rw-r--r--abs/core/linhes-live/lib/initcpio/install/larch2_aufs15
-rw-r--r--abs/core/linhes-live/lib/initcpio/install/larch318
-rwxr-xr-xabs/core/linhes-live/lib/initcpio/kinit6
-rw-r--r--abs/core/linhes-live/lib/initcpio/mkinitcpio.conf54
20 files changed, 0 insertions, 1612 deletions
diff --git a/abs/core/linhes-live/PKGBUILD b/abs/core/linhes-live/PKGBUILD
deleted file mode 100644
index c86e3cc..0000000
--- a/abs/core/linhes-live/PKGBUILD
+++ /dev/null
@@ -1,32 +0,0 @@
-# Maintainer: R. Dale Thomas <rdt[at]KnoppMyth[dot]net>
-# 2008.09.25
-pkgname=linhes-live
-pkgver=5.3.3
-pkgrel=25
-
-pkgdesc="LinHes compulsory components for the Live System."
-url="http://KnoppMyth.net"
-depends=()
-arch=( i586 i686 x86_64 )
-license=('GPL')
-
-build() {
- # setup the local environment:
- local rDir=bin eDir=etc lDir=lib sDir=session-save oDir=opt/$pkgname
- local srcDir=${startdir}/src pkgDir=${startdir}/pkg
- local insDir=${pkgDir}/$oDir proDir=${pkgDir}/${eDir}/profile.d
-
- mkdir -p $pkgDir $insDir $proDir
- cp -dr ${startdir}/$eDir $pkgDir
- local pthDir=
- echo 'export PATH=${PATH}:'"/$oDir/$rDir" > ${proDir}/${pkgname}.sh
- cp -dr ${startdir}/$lDir $pkgDir
- cp -dr ${startdir}/$rDir $insDir
- [ -d ${startdir}/$sDir ] && cp -dr ${startdir}/$sDir $insDir
- chown -R root.root $pkgDir
- return 0
-}
-
-# End
-#change hook1 to wait for usb cdroms
-#add extra login to f_remountro for vmware/usb
diff --git a/abs/core/linhes-live/bin/gen_fstab b/abs/core/linhes-live/bin/gen_fstab
deleted file mode 100755
index db36546..0000000
--- a/abs/core/linhes-live/bin/gen_fstab
+++ /dev/null
@@ -1,122 +0,0 @@
-#! /bin/sh
-#
-# gen_fstab - make new fstab for larch live system based on detected devices
-#
-# Author: Michael Towers <gradgrind[at]online[dot]de>
-#
-# This file is part of the larch project.
-#
-# larch is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# larch is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with larch; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-#
-#----------------------------------------------------------------------------
-# 2007.12.17
-
-# Note that the results are, by default, not copied into place
-# They end up here:
-DEST="/tmp/fstab"
-MNT="/tmp/mnt"
-
-# However, passing '-l' as command-line option will install them.
-# The old fstab will then be backed up to fstab~.
-LOAD=""
-if [ "$1" = "-l" ]; then LOAD="-l"; fi
-
-if [ -n "$( df | grep " ${MNT}" )" ]; then
- echo "ERROR: Mounted filesystem at/within ${MNT}"
- exit 1
-fi
-mkdir -p ${MNT}
-rm -rf ${MNT}/*
-
-tmpfile="/tmp/fstab2"
-: >${tmpfile}
-
-echo "# fstab generated by gen_fstab" >${DEST}
-echo "#<file system> <dir> <type> <options> <dump> <pass>" >>${DEST}
-echo >>${DEST}
-
-echo "none /dev/pts devpts defaults 0 0" >>${DEST}
-echo "none /dev/shm tmpfs defaults 0 0" >>${DEST}
-echo >>${DEST}
-
-# Get all other partitions
-sfdisk -d | grep "^/dev/" | sed "s|\(.*\):.*Id=\(..\).*|\1 \2|" | \
- while read dev id; do
- # Ignore if id is "Extended" or "LVM", these are not usable partitions
- if [ "${id}" = "5" -o "${id}" = "8e" ]; then continue; fi
- # See if swap
- if [ "${id}" = "82" ]; then
- printf "%-12s %-12s %-8s defaults,noatime 0 0\n" \
- ${dev} swap swap >>${DEST}
- continue
- fi
- removable=""
- part=$( basename ${dev} )
- if [ $( cat /sys/block/${part:0:3}/removable 2>/dev/null ) -ne 0 ]; then
- removable="_rmv"
- fi
- mountdir=${part}${removable}
- printf "%-12s %-12s %-8s user,noauto,noatime 0 0\n" \
- ${dev} /mnt/${mountdir} auto >>${tmpfile}
- mkdir -p ${MNT}/${mountdir}
- done
-
-# LVM
-for lvmd in $( ls /dev/mapper 2>/dev/null | grep -v control ); do
- printf "%-30s %-22s %-8s user,noauto,noatime 0 0\n" \
- /dev/mapper/${lvmd} /mnt/${lvmd} auto >>${tmpfile}
- mkdir -p ${MNT}/${lvmd}
-done
-
-echo >>${DEST}
-cat ${tmpfile} >>${DEST}
-rm ${tmpfile}
-echo >>${DEST}
-
-# CD devices
-for dev in $( cat /proc/sys/dev/cdrom/info 2>/dev/null | head -n 3 | \
- tail -n 1 | cut -d ":" -f 2 ); do
- mountdir="${dev}_cd"
- mkdir ${MNT}/${mountdir}
- printf "%-12s %-12s %-8s user,noauto,exec,unhide 0 0\n" \
- /dev/${dev} /mnt/${mountdir} auto >>${DEST}
-done
-
-echo >>${DEST}
-echo "# This would do for a floppy" >>${DEST}
-echo "#/dev/fd0 /mnt/floppy vfat,ext2 rw,user,noauto 0 0" >>${DEST}
-echo "# + mkdir /mnt/floppy" >>${DEST}
-echo >>${DEST}
-echo "# E.g. for USB storage:" >>${DEST}
-echo "#/dev/sdb1 /mnt/usb auto rw,user,noauto 0 0" >>${DEST}
-echo "# + mkdir /mnt/usb" >>${DEST}
-
-if [ -n "${LOAD}" ]; then
- # test if the script is started by root user. If not, exit
- if [ $UID -ne 0 ]; then
- echo "Only root can run ${APP}"; exit 1
- fi
-
- cp -b ${DEST} /etc/fstab
- # Delete removeable mount points which are not currently mounted
- for m in $( ls /mnt | grep ^[hs]d ); do
- if [ -z "$( df | grep " /mnt/${m}$" )" ]; then
- rmdir /mnt/${m}
- fi
- done
- for m in $( ls ${MNT} ); do
- mkdir -p /mnt/${m}
- done
-fi
diff --git a/abs/core/linhes-live/bin/km b/abs/core/linhes-live/bin/km
deleted file mode 100755
index 386d966..0000000
--- a/abs/core/linhes-live/bin/km
+++ /dev/null
@@ -1,76 +0,0 @@
-#!/bin/sh
-# $Id: km,v 1.2 2005/12/13 04:14:53 judd Exp $
-# Modified by gradgrind to deal only with i386 keymaps
-# and BASEDIR changed
-# - also saves results to /etc/rc.conf
-
-# test if the script is started by root user. If not, exit
-if [ $UID -ne 0 ]; then
- echo "This should be run as root"; exit 1
-fi
-
-ANSWER="/tmp/.km"
-BASEDIR="/usr/share/kbd"
-
-domenu()
-{
- menutype=$1 ; shift
- text=$1 ; shift
- height=$1 ; shift
- width=$1 ; shift
- mheight=$1 ; shift
-
- dialog --cancel-label "Skip" --$menutype "$text" $height $width $mheight $*
-}
-
-if [ ! -d $BASEDIR/keymaps ]; then
- echo "Cannot load keymaps, as none were found in $BASEDIR/keymaps" >&2
- exit 1
-else
- echo "Scanning for keymaps..."
- KEYMAPS=
- for t in qwerty qwertz azerty dvorak; do
- for i in `find $BASEDIR/keymaps/i386/$t -follow -name "*.gz"`; do
- fn=`echo $i | sed "s|$BASEDIR/keymaps/i386/||"`
- KEYMAPS="$KEYMAPS $fn -"
- done
- done
- domenu menu "Select A Keymap" 22 60 16 $KEYMAPS 2>$ANSWER
- keymap=`cat $ANSWER`
-fi
-
-if [ ! -d $BASEDIR/consolefonts ]; then
- echo "Cannot load consolefonts, as none were found in $BASEDIR/consolefonts" >&2
-else
- echo "Scanning for fonts..."
- FONTS=
- for i in `find $BASEDIR/consolefonts -follow -name "*.gz"`; do
- fn=`echo $i | sed "s|$BASEDIR/consolefonts/||"`
- FONTS="$FONTS $fn -"
- done
- domenu menu "Select A Console Font" 22 60 16 $FONTS 2>$ANSWER
- font=`cat $ANSWER`
-fi
-
-if [ "$keymap" ]; then
- echo "Loading keymap: $keymap"
- loadkeys -q $BASEDIR/keymaps/i386/$keymap
- sed -i "s|^KEYMAP=.*|KEYMAP=\"$( echo $keymap | \
- cut -d'.' -f1 )\"|" /etc/rc.conf
-fi
-
-if [ "$font" ]; then
- echo "Loading font: $font"
- for i in `seq 1 4`; do
- if [ -d /dev/vc ]; then
- setfont $BASEDIR/consolefonts/$font -C /dev/vc/${i}
- else
- setfont $BASEDIR/consolefonts/$font -C /dev/tty${i}
- fi
- done
- sed -i "s|^CONSOLEFONT=.*|CONSOLEFONT=\"$( echo $font | \
- cut -d'.' -f1 )\"|" /etc/rc.conf
-fi
-
-exit 0
-
diff --git a/abs/core/linhes-live/etc/live-shutdown b/abs/core/linhes-live/etc/live-shutdown
deleted file mode 100644
index b6a8378..0000000
--- a/abs/core/linhes-live/etc/live-shutdown
+++ /dev/null
@@ -1,90 +0,0 @@
-# Functions used by rc.shutdown
-# Modified versions for linhes live systems
-
-f_saveclock ()
-{
- :
-}
-
-f_swapoff ()
-{
- ############################# Include session saving functions
-# . /opt/linhes-live/session-save/shutdown2
-# if [ -f /tmp/checkse ]; then
-# . /tmp/checkse
-# else
-# checkse
-# fi
-
- if [ -n "${saving}" ] && ! session_save; then
- echo
- echo "If you know what you are doing, you may be able to recover"
- echo "something from this unpleasant situation."
- echo
- echo "You may use the command line to investigate further ..."
- echo
- echo "When finished please enter 'exit', the shutdown process will"
- echo "then continue."
- sh -i
- fi
-
- #############################
-
- stat_busy "Deactivating Swap"
- /sbin/swapoff -a
- stat_done
-}
-
-f_remountro ()
-{
- bootdev=`cat /.livesys/bootdevice`
- echo "Boot device was $bootdev"
- #bootdev=`basename $bootdev`
- for i in `ls /dev/cd/*`
- do
- cdrom=`readlink -f $i`
- if [ x$cdrom = x$bootdev ]
- then
- ejectdev=$cdrom
- break
- fi
-
- done
- lspci |grep -q VMware
- if [ ! $? = 0 ]
- then
- if [ -n "${ejectdev}" ]
- then
- echo "Ejecting CD $ejectdev"
- eject ${ejectdev}
- echo "========================================"
- echo "Tray will retract after 10 seconds"
- for timer in `seq -w 10 -1 0`
- do
- #echo -n $timer '\x08'
- echo -ne "\t"$timer '\010\010\010\010'
- sleep 1
- done
- echo
- echo "========================================"
- eject -t ${ejectdev}
- echo
- echo "It's safe to switch the computer off now"
- #echo -ne "Press Enter to continue"
- #read junk
- else
- echo "Boot device is not a cdrom, no need to eject"
- fi
- else
- echo "VMWARE detected, not ejecting the CD"
- fi
-}
-#Preloads these commands so we can eject the CD.
-#
-seq --help >/dev/null 2>&1
-eject --help >/dev/null 2>&1
-halt --help >/dev/null 2>&1
-poweroff --help >/dev/null 2>&1
-reboot --help >/dev/null 2>&1
-
-# End
diff --git a/abs/core/linhes-live/etc/live-sysinit b/abs/core/linhes-live/etc/live-sysinit
deleted file mode 100644
index 40edad9..0000000
--- a/abs/core/linhes-live/etc/live-sysinit
+++ /dev/null
@@ -1,73 +0,0 @@
-# Functions used by rc.sysinit
-# Modified versions for linhes live systems
-
-f_header ()
-{
- cR='\e[31m' cY='\e[1;33m' cN='\e[0m' cW='\e[1;37m'
- echo " "
- printsep
- printf " ${cR}LinHes ${cY}Installation${cN}/${cY}Live${cW} CDROM${cN}. "
- printsep
- echo " "
-}
-
-f_fscheck ()
-{
- stat_busy "Initializing /etc/mtab"
- #/bin/mount -n -o remount,rw /
-
- /bin/rm -f /etc/mtab*
-
- # Make entries for aufs/unionfs, tmpfs and live medium in /etc/mtab
- grep "^aufs */ " /proc/mounts >>/etc/mtab
- grep "^unionfs */ " /proc/mounts >>/etc/mtab
- grep "^tmpfs */.livesys " /proc/mounts >>/etc/mtab
- if [ -d /.livesys/medium/live ]; then
- grep " /.livesys/medium " /proc/mounts >>/etc/mtab
- fi
-
- f_mountlocal
- stat_done
-
- if [ -z "$( cat /etc/fstab | grep "^#KEEP" )" ]; then
- stat_busy "Generating fresh /etc/fstab"
- /opt/linhes-live/bin/gen_fstab -l
- stat_done
- fi
-
- # now mount all the local filesystems
- stat_busy "Mounting Local Filesystems"
- /bin/mount -a -t $NETFS
- stat_done
-}
-
-f_swapon ()
-{
- #+*** Copy session-save flag-file (if it exists)
- [ -f /live/nosave ] && cp /live/nosave /.livesys
- #-***
-
- #*** Conditional swap activation
- if [ -e /.livesys/swapon ]; then
- status "Activating Swap" /sbin/swapon -a
- fi
-}
-f_loadmodules()
-{
- CMDLINE=$(cat /proc/cmdline)
- echo $CMDLINE | grep -q modules
- if [ $? -eq 0 ]
- then
- TEMPVAR=${CMDLINE#* modules=}
- CMDMODULES=${TEMPVAR%% *}
- mymod=`echo $CMDMODULES|/bin/sed 's|-|_|g' |/bin/sed 's|,| |g'`
- stat_busy "Loading CMD module"
- for mod in $mymod
- do
- /sbin/modprobe $mod
- done
- stat_done
- fi
-
-
-}
diff --git a/abs/core/linhes-live/etc/loginroot b/abs/core/linhes-live/etc/loginroot
deleted file mode 100755
index e3153c6..0000000
--- a/abs/core/linhes-live/etc/loginroot
+++ /dev/null
@@ -1,3 +0,0 @@
-#! /bin/sh
-login -f root
-# End
diff --git a/abs/core/linhes-live/etc/rc.shutdown-live b/abs/core/linhes-live/etc/rc.shutdown-live
deleted file mode 100755
index 79eae47..0000000
--- a/abs/core/linhes-live/etc/rc.shutdown-live
+++ /dev/null
@@ -1,168 +0,0 @@
-#!/bin/bash
-#
-# /etc/rc.shutdown
-#
-
-###
-# Based on initscripts 2008.05-1
-###
-
-. /etc/rc.conf
-. /etc/rc.d/functions
-
-###############################################################
-### These functions have been separated out, so that they can be
-### replaced in linhes live systems.
-
-f_saveclock ()
-{
- stat_busy "Saving System Clock"
- if [ "$TIMEZONE" != "" -a -e "/usr/share/zoneinfo/$TIMEZONE" ]; then
- /bin/rm -f /etc/localtime
- /bin/cp "/usr/share/zoneinfo/$TIMEZONE" /etc/localtime
- fi
-
- HWCLOCK_PARAMS="--systohc"
- if [ "$HARDWARECLOCK" = "UTC" ]; then
- HWCLOCK_PARAMS="$HWCLOCK_PARAMS --utc"
- else
- HWCLOCK_PARAMS="$HWCLOCK_PARAMS --localtime"
- fi
- if [ "$USEDIRECTISA" = "yes" -o "$USEDIRECTISA" = "YES" ]; then
- HWCLOCK_PARAMS="$HWCLOCK_PARAMS --directisa"
- fi
- /sbin/hwclock $HWCLOCK_PARAMS
- stat_done
-}
-
-f_swapoff ()
-{
- stat_busy "Deactivating Swap"
- /sbin/swapoff -a
- stat_done
-}
-
-f_remountro ()
-{
- stat_busy "Remounting Root Filesystem Read-only"
- /bin/mount -n -o remount,ro /
- stat_done
-}
-
-###############################################################
-
-### Override above functions if running linhes live system
-[ -f /etc/live-shutdown ] && . /etc/live-shutdown
-
-# avoid staircase effect
-/bin/stty onlcr
-
-echo " "
-printhl "Initiating Shutdown..."
-echo " "
-
-# avoid NIS hanging syslog-ng on shutdown by unsetting the domainname
-if [ -x /bin/domainname ]; then
- /bin/domainname ""
-fi
-
-if [ -x /etc/rc.local.shutdown ]; then
- /etc/rc.local.shutdown
-fi
-
-if [ "$PREVLEVEL" = "3" -o "$PREVLEVEL" = "5" ]; then
- # Shutdown daemons
- let i=${#DAEMONS[@]}
- while [ $i -ge 0 ]; do
- if [ "${DAEMONS[$i]:0:1}" != '!' ]; then
- ck_daemon ${DAEMONS[$i]#@} || /etc/rc.d/${DAEMONS[$i]#@} stop
- fi
- let i=i-1
- done
- # find any leftover daemons and shut them down in reverse order
- if [ -d /var/run/daemons ]; then
- for daemon in $(/bin/ls -1t /var/run/daemons); do
- /etc/rc.d/$daemon stop
- done
- fi
-fi
-
-# Terminate all processes
-stat_busy "Sending SIGTERM To Processes"
-/sbin/killall5 -15 &> /dev/null
-/bin/sleep 5
-stat_done
-
-stat_busy "Sending SIGKILL To Processes"
-/sbin/killall5 -9 &> /dev/null
-/bin/sleep 1
-stat_done
-
-stat_busy "Saving Random Seed"
-/bin/dd if=/dev/urandom of=/var/run/random-seed count=1 bs=512 2> /dev/null
-stat_done
-
-#F Save system time
-f_saveclock
-
-# removing psmouse module to fix some reboot issues on newer laptops
-/sbin/modprobe -r psmouse >/dev/null 2>&1
-
-# Write to wtmp file before unmounting
-/sbin/halt -w
-
-#F Deactivate swaps
-f_swapoff
-
-stat_busy "Unmounting Filesystems"
-/bin/umount -a -t noramfs,notmpfs,nosysfs,noproc
-stat_done
-
-# Kill non-root encrypted partition mappings
-if [ -f /etc/crypttab -a -n "$(/bin/grep -v ^# /etc/crypttab | /bin/grep -v ^$)" ]; then
- stat_busy "Deactivating encrypted volumes:"
- CS=/sbin/cryptsetup.static
- do_uncrypt() {
- if [ $# -ge 3 ]; then
- stat_append "${1}.."
- $CS remove $1 >/dev/null 2>&1
- if [ $? -ne 0 ]; then
- stat_append "failed "
- else
- stat_append "ok "
- fi
- fi
- }
- while read line; do
- eval do_uncrypt "$line"
- done </etc/crypttab
- stat_done
-fi
-
-if [ "$USELVM" = "yes" -o "$USELVM" = "YES" ]; then
- if [ -x /sbin/lvm -a -d /sys/block ]; then
- stat_busy "Deactivating LVM2 groups"
- /sbin/lvm vgchange --ignorelockingfailure -an >/dev/null 2>&1
- stat_done
- fi
-fi
-
-#F Remount / ro
-f_remountro
-#Eject the CD
-
-# Power off or reboot
-if [ "$RUNLEVEL" = "0" ]; then
- printsep
- printhl "${C_H2}POWER OFF"
- /sbin/poweroff -d -f -h -i
-else
- printsep
- printhl "${C_H2}REBOOTING"
- # if kexec is installed and a kernel is loaded, use it
- [ -x /sbin/kexec ] && /sbin/kexec -e > /dev/null 2>&1
- /sbin/reboot -d -f -i
-fi
-
-# vim: set ts=2 sw=2 noet:
-# End
diff --git a/abs/core/linhes-live/etc/rc.sysinit-live b/abs/core/linhes-live/etc/rc.sysinit-live
deleted file mode 100755
index afdc2ae..0000000
--- a/abs/core/linhes-live/etc/rc.sysinit-live
+++ /dev/null
@@ -1,469 +0,0 @@
-#!/bin/bash
-#
-# /etc/rc.sysinit
-#
-
-###
-# Based on initscripts 2008.05-1
-###
-
-. /etc/rc.conf
-. /etc/rc.d/functions
-
-###############################################################
-### These functions have been separated out, so that they can be
-### replaced in linhes live systems.
-
-f_header ()
-{
- echo " "
- printhl "Arch Linux $C_OTHER(${C_H2}Core Dump$C_OTHER)\n"
- printhl "${C_H2}http://www.archlinux.org"
- printhl "Copyright 2002-2007 Judd Vinet"
- printhl "Copyright 2007-2008 Aaron Griffin"
- printhl "Distributed under the GNU General Public License (GPL)"
- printsep
-}
-
-f_fscheck ()
-{
- status "Mounting Root Read-only" /bin/mount -n -o remount,ro /
-
- if [ -x /sbin/fsck ]; then
- stat_busy "Checking Filesystems"
- if /bin/grep -qw quiet /proc/cmdline; then
- /sbin/fsck -A -T -C -a -t $NETFS $FORCEFSCK >/dev/null 2>&1
- else
- /sbin/fsck -A -T -C -a -t $NETFS $FORCEFSCK 2>/dev/null
- fi
- fsckret=$?
- if [ ${fsckret} -gt 1 ]; then
- stat_fail
- if [ $((${fsckret}&2)) -eq 2 ]; then
- echo
- echo "********************** REBOOT REQUIRED *********************"
- echo "* *"
- echo "* The system will be rebooted automatically in 15 seconds. *"
- echo "* *"
- echo "************************************************************"
- echo
- /bin/sleep 15
- else
- echo
- echo "***************** FILESYSTEM CHECK FAILED ****************"
- echo "* *"
- echo "* Please repair manually and reboot. Note that the root *"
- echo "* file system is currently mounted read-only. To remount *"
- echo "* it read-write type: mount -n -o remount,rw / *"
- echo "* When you exit the maintenance shell the system will *"
- echo "* reboot automatically. *"
- echo "* *"
- echo "************************************************************"
- echo
- /sbin/sulogin -p
- fi
- echo "Automatic reboot in progress..."
- /bin/umount -a
- /bin/mount -n -o remount,ro /
- /sbin/reboot -f
- exit 0
- fi
- stat_done
- fi
-
- stat_busy "Mounting Local Filesystems"
- /bin/mount -n -o remount,rw /
- /bin/rm -f /etc/mtab*
- # make sure / gets written to /etc/mtab
- /bin/mount -o remount,rw /
-
- f_mountlocal
- stat_done
-}
-
-f_mountlocal ()
-{
- # Write /proc, /sys and /dev to /etc/mtab
- if [ -e /proc/mounts ]; then
- /bin/grep -e "/proc " -e "/sys " -e "/dev " /proc/mounts >> /etc/mtab
- fi
- # now mount all the local filesystems
- /bin/mount -a -t $NETFS
-}
-
-f_swapon ()
-{
- status "Activating Swap" /sbin/swapon -a
-}
-
-###############################################################
-
-### Override above functions if running linhes live system
-[ -f /etc/live-sysinit ] && . /etc/live-sysinit
-
-#F Print header
-f_header
-
-# mount /proc, /sys and our RAM /dev
-/bin/mount -n -t ramfs none /dev
-/bin/mount -n -t proc none /proc
-/bin/mount -n -t sysfs none /sys
-
-# Create our default nodes that minilogd may need
-/bin/mknod /dev/null c 1 3
-/bin/mknod /dev/zero c 1 5
-/bin/mknod /dev/console c 5 1
-
-# More initial /dev setup that udev doesn't do
-/bin/ln -snf /proc/self/fd /dev/fd
-/bin/ln -snf /proc/self/fd/0 /dev/stdin
-/bin/ln -snf /proc/self/fd/1 /dev/stdout
-/bin/ln -snf /proc/self/fd/2 /dev/stderr
-/bin/ln -snf /proc/kcore /dev/core
-/bin/mkdir /dev/pts
-/bin/mkdir /dev/shm
-
-# start up our mini logger until syslog takes over
-/sbin/minilogd
-
-# anything more serious than KERN_WARNING goes to the console
-# 'verbose' cmdline parameter enables more messages
-if /bin/grep -q " verbose" /proc/cmdline; then
- /bin/dmesg -n 8
-else
- /bin/dmesg -n 3
-fi
-
-# enable rtc access
-/sbin/modprobe rtc-cmos >/dev/null 2>&1
-RTC_MAJOR=$(/bin/grep -w rtc /proc/devices 2>/dev/null); RTC_MAJOR="${RTC_MAJOR%% *}"
-if [ -n "$RTC_MAJOR" ]; then
- /bin/mkdir /dev/misc/
- /bin/mknod /dev/misc/rtc0 c $RTC_MAJOR 0
- /bin/ln -s /dev/misc/rtc0 /dev/rtc
-fi
-
-HWCLOCK_PARAMS="--hctosys"
-if [ "$HARDWARECLOCK" = "UTC" ]; then
- HWCLOCK_PARAMS="$HWCLOCK_PARAMS --utc"
-else
- HWCLOCK_PARAMS="$HWCLOCK_PARAMS --localtime"
-fi
-if [ "$USEDIRECTISA" = "yes" -o "$USEDIRECTISA" = "YES" ]; then
- HWCLOCK_PARAMS="$HWCLOCK_PARAMS --directisa"
-fi
-
-# Set clock early to fix some bugs with filesystem checks
-# Clock is set again later to match rc.conf
-if [ -f /etc/localtime ]; then
- /sbin/hwclock $HWCLOCK_PARAMS --noadjfile
-fi
-
-echo > /proc/sys/kernel/hotplug
-
-if [ -x /sbin/udevadm -a -d /sys/block ]; then
- # We have udev and /sys appears to be mounted, use UDev
- #status "Starting UDev Daemon" /etc/start_udev init
-
- stat_busy "Starting UDev Daemon"
- /sbin/udevd --daemon
- stat_done
-else
- # Static /dev, our last resort
- status "Using static /dev filesystem" true
-fi
-
-# Load modules from the MODULES array defined in rc.conf
-if ! [ "$load_modules" = "off" ]; then
- if [ -f /proc/modules ]; then
-############Added by jm to load modules from /proc/cmdline
- f_loadmodules
-##############
- stat_busy "Loading Modules"
- for mod in "${MODULES[@]}"; do
- if [ "$mod" = "${mod#!}" ]; then
- /sbin/modprobe $mod
- fi
- done
- stat_done
- fi
- if [ -d /proc/acpi ]; then
- stat_busy "Loading standard ACPI modules"
- ACPI_MODULES="ac battery button fan processor thermal"
- k="$(echo $BLACKLIST ${MOD_BLACKLIST[@]} | /bin/sed 's|-|_|g')"
- j="$(echo ${MODULES[@]} | /bin/sed 's|-|_|g')"
- #add disabled MODULES (!) to blacklist - much requested feature
- for m in ${j}; do
- [ "$m" != "${m#!}" ] && k="${k} ${m#!}"
- done
- # add disablemodules= from commandline to blacklist
- k="${k} $(echo ${disablemodules} | /bin/sed 's|-|_|g' | /bin/sed 's|,| |g')"
- for n in ${ACPI_MODULES}; do
- if ! echo ${k} | /bin/grep "\<$n\>" 2>&1 >/dev/null; then
- /sbin/modprobe $n > /dev/null 2>&1
- fi
- done
- stat_done
- fi
-fi
-
-# run udev uevents
-if /bin/pidof -o %PPID /sbin/udevd >/dev/null; then
- #status "Loading UDev uevents" /etc/start_udev uevents
- stat_busy "Loading UDev uevents"
- udevstart="$(/bin/date +%s%0N)"
- /sbin/udevadm trigger
- /sbin/udevadm settle
- stat_done
- udevend="$(/bin/date +%s%0N)"
- printhl " UDev uevent processing time: $((($udevend-$udevstart)/1000000))ms"
-fi
-
-# bring up the loopback interface
-if [ -d /sys/class/net/lo ]; then
- stat_busy "Bringing up loopback interface"
- /sbin/ifconfig lo 127.0.0.1 up
- if [ $? -ne 0 ]; then
- stat_fail
- else
- stat_done
- fi
-fi
-
-# If necessary, find md devices and manually assemble RAID arrays
-if [ -f /etc/mdadm.conf -a "$(/bin/grep ^ARRAY /etc/mdadm.conf 2>/dev/null)" ]; then
- # udev won't create these md nodes, so we do it ourselves
- for dev in $(/bin/grep ^ARRAY /etc/mdadm.conf | /bin/awk '{print $2}'); do
- path=$(echo $dev | /bin/sed 's|/[^/]*$||')
- node=$(echo $dev | /bin/sed "s|^$path/||")
- minor=$(echo $node | /bin/sed 's|^[^0-9]*||')
- [ ! -e $path/$node ] && /bin/mknod $path/$node b 9 $minor
- done
- status "Activating RAID arrays" /sbin/mdadm --assemble --scan
-fi
-
-if [ "$USELVM" = "yes" -o "$USELVM" = "YES" ]; then
- if [ -x /sbin/lvm -a -d /sys/block ]; then
- # Kernel 2.6.x, LVM2 groups
- /sbin/modprobe -q dm-mod 2>/dev/null
- stat_busy "Activating LVM2 groups"
- /sbin/lvm vgscan --ignorelockingfailure --mknodes >/dev/null
- /sbin/lvm vgchange --ignorelockingfailure -a y >/dev/null
- if [ $? -ne 0 ]; then
- stat_fail
- else
- stat_done
- fi
- fi
-fi
-
-# Set up non-root encrypted partition mappings
-if [ -f /etc/crypttab -a -n "$(/bin/grep -v ^# /etc/crypttab | /bin/grep -v ^$)" ]; then
- /sbin/modprobe -q dm-mod 2>/dev/null
- stat_busy "Unlocking encrypted volumes:"
- csfailed=0
- CS=/sbin/cryptsetup.static
- do_crypt() {
- if [ $# -ge 3 ]; then
- cname="$1"
- csrc="$2"
- cpass="$3"
- shift 3
- copts="$*"
- stat_append "${cname}.."
- # For some fun reason, the parameter ordering varies for
- # LUKS and non-LUKS devices. Joy.
- if [ "${cpass}" = "SWAP" ]; then
- # This is DANGEROUS! The only possible safety check
- # is to not proceed in case we find a LUKS device
- # This may cause dataloss if it is not used carefully
- if $CS isLuks $csrc 2>/dev/null; then
- false
- else
- $CS -d /dev/urandom $copts create $cname $csrc >/dev/null
- if [ $? -eq 0 ]; then
- stat_append "creating swapspace.."
- /sbin/mkswap -L $cname /dev/mapper/$cname >/dev/null
- fi
- fi
- elif [ "${cpass}" = "ASK" ]; then
- printf "\nOpening '${cname}' volume:\n"
-
- if $CS isLuks $csrc 2>/dev/null; then
- $CS $copts luksOpen $csrc $cname < /dev/console
- else
- $CS $copts create $cname $csrc < /dev/console
- fi
- elif [ "${cpass:0:1}" != "/" ]; then
- if $CS isLuks $csrc 2>/dev/null; then
- echo "$cpass" | $CS $copts luksOpen $csrc $cname >/dev/null
- else
- echo "$cpass" | $CS $copts create $cname $csrc >/dev/null
- fi
- else
- if $CS isLuks $csrc 2>/dev/null; then
- $CS -d $cpass $copts luksOpen $csrc $cname >/dev/null
- else
- $CS -d $cpass $copts create $cname $csrc >/dev/null
- fi
- fi
- if [ $? -ne 0 ]; then
- csfailed=1
- stat_append "failed "
- else
- stat_append "ok "
- fi
- fi
- }
- while read line; do
- eval do_crypt "$line"
- done </etc/crypttab
- if [ $csfailed -eq 0 ]; then
- stat_done
- else
- stat_fail
- fi
- # Maybe someone has LVM on an encrypted block device
- if [ "$USELVM" = "yes" -o "$USELVM" = "YES" ]; then
- if [ -x /sbin/lvm -a -d /sys/block ]; then
- /sbin/lvm vgscan --ignorelockingfailure --mknodes >/dev/null
- /sbin/lvm vgchange --ignorelockingfailure -a y >/dev/null
- fi
- fi
-fi
-
-FORCEFSCK=
-[ -f /forcefsck ] && FORCEFSCK="-- -f"
-NETFS="nonfs,nonfs4,nosmbfs,nocifs,nocodafs,noncpfs,nosysfs,noshfs,nofuse,nofuseblk"
-
-#F Check filesystems
-f_fscheck
-
-#F Activate swaps
-f_swapon
-
-stat_busy "Configuring System Clock"
-if [ ! -f /var/lib/hwclock/adjtime ]; then
- echo "0.0 0 0.0" > /var/lib/hwclock/adjtime
-fi
-if [ "$TIMEZONE" != "" -a -e "/usr/share/zoneinfo/$TIMEZONE" ]; then
- /bin/rm -f /etc/localtime
- /bin/cp "/usr/share/zoneinfo/$TIMEZONE" /etc/localtime
-fi
-
-/sbin/hwclock $HWCLOCK_PARAMS
-stat_done
-
-if [ -f /var/run/random-seed ]; then
- stat_busy "Initializing Random Seed"
- /bin/cat /var/run/random-seed >/dev/urandom
- stat_done
-fi
-
-stat_busy "Removing Leftover Files"
-/bin/rm -f /etc/nologin &>/dev/null
-/bin/rm -f /etc/shutdownpid &>/dev/null
-/bin/rm -f /var/lock/* &>/dev/null
-/bin/rm -rf /tmp/* /tmp/.* &>/dev/null
-/bin/rm -f /forcefsck &>/dev/null
-(cd /var/run && /usr/bin/find . ! -type d -exec /bin/rm -f -- {} \; )
-: > /var/run/utmp
-# Keep {x,k,g}dm happy with xorg
-/bin/mkdir /tmp/.ICE-unix && /bin/chmod 1777 /tmp/.ICE-unix
-/bin/mkdir /tmp/.X11-unix && /bin/chmod 1777 /tmp/.X11-unix
-stat_done
-
-#status "Updating Shared Library Links" /sbin/ldconfig
-
-if [ "$HOSTNAME" != "" ]; then
- status "Setting Hostname: $HOSTNAME" /bin/hostname $HOSTNAME
-fi
-
-# Set the NIS domain name, if necessary
-[ -f /etc/conf.d/nisdomainname ] && . /etc/conf.d/nisdomainname
-if [ "$NISDOMAINNAME" != "" ]; then
- status "Setting NIS Domain Name: $NISDOMAINNAME" /bin/nisdomainname $NISDOMAINNAME
-fi
-
-status "Updating Module Dependencies" /sbin/depmod -A
-
-# Flush old locale settings
-: >/etc/profile.d/locale.sh
-/bin/chmod 755 /etc/profile.d/locale.sh
-# Set user defined locale
-[ -z "$LOCALE" ] && LOCALE="en_US"
-stat_busy "Setting Locale: $LOCALE"
-echo "export LANG=$LOCALE" >>/etc/profile.d/locale.sh
-stat_done
-
-if echo "$LOCALE" | /bin/grep -qi utf ; then
- stat_busy "Setting Consoles to UTF-8 mode"
- # UTF-8 consoles are default since 2.6.24 kernel
- # this code is needed not only for older kernels,
- # but also when user has set vt.default_utf8=0 but LOCALE is *.UTF-8.
- /usr/bin/kbd_mode -u
- for i in $(/usr/bin/seq 0 63); do
- printf "\e%%G" > /dev/vc/${i}
- done
- # the $CONSOLE check helps us avoid this when running scripts from cron
- echo 'if [ "$CONSOLE" = "" -a "$TERM" = "linux" -a -t 1 ]; then printf "\e%%G"; fi' >>/etc/profile.d/locale.sh
- stat_done
- [ -n "$KEYMAP" ] && status "Loading Keyboard Map: $KEYMAP" /bin/loadkeys -q -u $KEYMAP
-else
- stat_busy "Setting Consoles to legacy mode"
- # make non-UTF-8 consoles work on 2.6.24 and newer kernels
- /usr/bin/kbd_mode -a
- for i in $(/usr/bin/seq 0 63); do
- printf "\e%%@" > /dev/vc/${i}
- done
- # the $CONSOLE check helps us avoid this when running scripts from cron
- echo 'if [ "$CONSOLE" = "" -a "$TERM" = "linux" -a -t 1 ]; then printf "\e%%@"; fi' >>/etc/profile.d/locale.sh
- stat_done
- [ -n "$KEYMAP" ] && status "Loading Keyboard Map: $KEYMAP" /bin/loadkeys -q $KEYMAP
-fi
-
-if [ -n "$CONSOLEFONT" ]; then
- stat_busy "Loading Console Font: $CONSOLEFONT"
- #CONSOLEMAP in UTF-8 shouldn't be used
- if [ -n "$CONSOLEMAP" ] && echo "$LOCALE" | /bin/grep -qi utf ; then
- CONSOLEMAP=""
- fi
- for i in $(/usr/bin/seq 0 63); do
- if [ -n "$CONSOLEMAP" ]; then
- /usr/bin/setfont -m $CONSOLEMAP $CONSOLEFONT -C /dev/vc/${i} >/dev/null 2>&1
- else
- /usr/bin/setfont $CONSOLEFONT -C /dev/vc/${i} >/dev/null 2>&1
- fi
- done
- if [ $? -ne 0 ]; then
- stat_fail
- else
- for i in $(/usr/bin/seq 0 63); do
- printf "\e(K" > /dev/vc/${i}
- done
- # the $CONSOLE check helps us avoid this when running scripts from cron
- echo 'if [ "$CONSOLE" = "" -a "$TERM" = "linux" -a -t 1 ]; then printf "\e(K"; fi' >>/etc/profile.d/locale.sh
- stat_done
- fi
-fi
-
-# Adding persistent network/cdrom generated rules
-if [ -f "/dev/.udev/tmp-rules--70-persistent-cd.rules" ]; then
- stat_busy "Adding persistent cdrom udev rules"
- /bin/cat /dev/.udev/tmp-rules--70-persistent-cd.rules >> /etc/udev/rules.d/70-persistent-cd.rules
- stat_done
-fi
-if [ -f "/dev/.udev/tmp-rules--70-persistent-net.rules" ]; then
- stat_busy "Adding persistent network udev rules"
- /bin/cat /dev/.udev/tmp-rules--70-persistent-net.rules >> /etc/udev/rules.d/70-persistent-net.rules
- stat_done
-fi
-
-# Save our dmesg output from this boot
-if [ -f /var/log/dmesg.log ]; then
- /bin/rm /var/log/dmesg.log
-fi
-/bin/dmesg > /var/log/dmesg.log
-
-# vim: set ts=2 noet:
-# End
diff --git a/abs/core/linhes-live/etc/ulogin b/abs/core/linhes-live/etc/ulogin
deleted file mode 100755
index 085c431..0000000
--- a/abs/core/linhes-live/etc/ulogin
+++ /dev/null
@@ -1,57 +0,0 @@
-#!/bin/bash
-
-# ulogin - A script for autologin of a selected user (and more)
-#-----------------------------------------------------------------
-# 2008.04.06
-
-user=$( cat /tmp/newuser 2>/dev/null )
-
-rm -f /tmp/newuser
-rm -f /tmp/xlogout
-
-if [ -n "${user}" ]; then
- login -f ${user}
-else
- # offer choice of user
- ulist="$( cat /etc/passwd | grep ':/home/.*sh$' )"
- echo -e "\nLogin a user or quit:"
- echo " 0 : root"
- echo " 1 : REBOOT"
- echo " 2 : HALT"
-
- i=2
- for entry in ${ulist}; do
- i=$(( ${i} + 1 ))
- user="$( echo ${entry} | cut -d':' -f1 )"
- users[${i}]=${user}
- printf "%4d : %s\n" ${i} ${user}
- done
- while true; do
- read -p "Enter a number from 0 to ${i} : " n
- if [ "${n}" = 0 ]; then
- login -f root
- elif [ "${n}" = 1 ]; then
- exec reboot
- elif [ "${n}" = 2 ]; then
- exec halt
- elif [ -n "$( echo "${n}" | grep "^[0-9]\+$" )" ] && \
- [ -n "${users[${n}]}" ]; then
- login -f ${users[${n}]}
- else
- echo " *** Invalid choice ..."
- continue
- fi
- break
- done
-fi
-
-if grep "r" /tmp/xlogout &>/dev/null; then
- reboot
-elif grep "h" /tmp/xlogout &>/dev/null; then
- halt
-fi
-
-# This file is only needed for shutting down
-rm -f /tmp/checkse
-
-# End
diff --git a/abs/core/linhes-live/lib/initcpio/gen_larch_init b/abs/core/linhes-live/lib/initcpio/gen_larch_init
deleted file mode 100755
index d834e8f..0000000
--- a/abs/core/linhes-live/lib/initcpio/gen_larch_init
+++ /dev/null
@@ -1,12 +0,0 @@
-#! /bin/bash
-
-# gen_larch_init
-#
-# Author: Michael Towers <gradgrind[at]online[dot]de>
-
-# Create an initramfs for a larch live system
-# $1 - kernel version
-
-# The cpio.gz image is generated in larch.img
-
-/sbin/mkinitcpio -c /lib/initcpio/mkinitcpio.conf -k $1 -g larch.img
diff --git a/abs/core/linhes-live/lib/initcpio/hooks/larch1 b/abs/core/linhes-live/lib/initcpio/hooks/larch1
deleted file mode 100644
index 88ccc3e..0000000
--- a/abs/core/linhes-live/lib/initcpio/hooks/larch1
+++ /dev/null
@@ -1,125 +0,0 @@
-# vim: set ft=sh:
-
-# larch1 - live 'hook' for mkinitcpio: set up tmpfs and find boot device
-
-# Author: Michael Towers (gradgrind) <mt.42@web.de>
-#
-# This file is part of the larch project.
-#
-# larch is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# larch is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with larch; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-#
-#----------------------------------------------------------------------------
-#2008.02.11
-
-# Replacement for msg which includes leading and trailing spaces
-msg_ () { [ "${quiet}" != "y" ] && echo "$@"; }
-
-# Try to mount a disk, partition or cdrom and look for the file
-# 'larchboot' in the /larch directory.
-# If LiveCD system found in the device, return 0, else return 1
-# and leave the device mounted.
-# $1 = device name (e.g. "/dev/hda2")
-# $2 = directory where devices will be mounted
-#
-test_live_data_dir ()
-{
- /bin/mount -r -t iso9660 "$1" $2 >/dev/null 2>/dev/null || \
- /bin/mount -r -t vfat -o noatime,nodiratime "$1" $2 >/dev/null 2>/dev/null || \
- /bin/mount -r -t ext2 -o noatime,nodiratime "$1" $2 >/dev/null 2>/dev/null
- if [ $? -eq 0 ]; then
- if [ -f "$2/larch/larchboot" ]; then
- LDEV="$1"
- msg_ " ... found at $1"
- return 0
- else
- /bin/umount $2 2>/dev/null
- msg_ " ... $1 mounted, but no 'larch/larchboot' found"
- fi
- else
- msg_ " ... not $1"
- fi
- return 1
-}
-
-run_hook ()
-{
- msg_ ":: Creating writeable filesystem (tmpfs)"
- /bin/mkdir "/tfs"
- # Boot option copy-to-ram (c2r)
- if [ "${c2r}" = "y" ]; then
- TFSSIZE="90%"
- else
- TFSSIZE="60%"
- fi
- /bin/mount -t tmpfs -o "size=${TFSSIZE}" tmpfs "/tfs"
-
- # Directory for test mounts (and then for live CD)
- cdmount="/livecd"
- /bin/mkdir "${cdmount}"
-
- # look for livecd data directory, first try ${root}
- LDEV="${root}"
- if [ "x${LDEV}" != "x" ]; then
- /bin/mount -r -t iso9660 "${LDEV}" "${cdmount}" >/dev/null 2>/dev/null || \
- /bin/mount -r -t vfat -o noatime,nodiratime "${LDEV}" "${cdmount}" >/dev/null 2>/dev/null || \
- /bin/mount -r -t ext2 -o noatime,nodiratime "${LDEV}" "${cdmount}" >/dev/null 2>/dev/null
- if [ $? -eq 0 ]; then
- if [ -d "${cdmount}/larch" ]; then
- msg_ ":: larch system at ${LDEV}"
- else
- /bin/umount "${cdmount}" 2>/dev/null
- echo "!! No larch system at ${LDEV}"
- LDEV=""
- fi
- else
- echo "!! Couldn't mount ${LDEV}"
- LDEV=""
- fi
- fi
-
- # then try cdroms
- if [ "x${LDEV}" = "x" ]; then
- msg_ ":: Looking for boot device"
- cdroms=$( /bin/cat /proc/sys/dev/cdrom/info | { while read a b c; do
- if [ "${a}" = "drive" -a "${b}" = "name:" ]; then
- echo "${c}"
- break
- fi
- done
- } )
- for i in ${cdroms}; do
- test_live_data_dir "/dev/${i}" "${cdmount}"
- if [ $? -eq 0 ]; then break; fi
- done
- fi
-
- # test USB devices (and disks) repeatedly until timed out
- if [ "x${LDEV}" = "x" ]; then
- msg_ ":: Searching for usb (and disk) devices .."
- for i in 1 2 3 4 5; do
- msg_ " :wait ${i} :::"
- /bin/sleep ${i}
- for d in /dev/sd[a-z][0-9]*; do
- test_live_data_dir "${d}" "${cdmount}"
- if [ $? -eq 0 ]; then break 2; fi
- done
- msg_ ":: Searching for usb cdroms .."
- for d in /dev/sr[0-9]*; do
- test_live_data_dir "${d}" "${cdmount}"
- if [ $? -eq 0 ]; then break 2; fi
- done
- done
- fi
-}
diff --git a/abs/core/linhes-live/lib/initcpio/hooks/larch2 b/abs/core/linhes-live/lib/initcpio/hooks/larch2
deleted file mode 100644
index 74b4e64..0000000
--- a/abs/core/linhes-live/lib/initcpio/hooks/larch2
+++ /dev/null
@@ -1,33 +0,0 @@
-# larch2 - live 'hook' for mkinitcpio: unionfs specific
-
-# Author: Michael Towers (gradgrind) <mt.42@web.de>
-#
-# This file is part of the larch project.
-#
-# larch is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# larch is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with larch; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-#
-#----------------------------------------------------------------------------
-#2007.12.13
-
-run_hook ()
-{
- #!!! --- unionfs specific
- # Need unionfs module
- /bin/modprobe unionfs
- ovlmnt="ro"
- bropt="dirs="
- sqfmnt="ro"
- utype="unionfs"
-}
diff --git a/abs/core/linhes-live/lib/initcpio/hooks/larch2_aufs b/abs/core/linhes-live/lib/initcpio/hooks/larch2_aufs
deleted file mode 100644
index ac8e40b..0000000
--- a/abs/core/linhes-live/lib/initcpio/hooks/larch2_aufs
+++ /dev/null
@@ -1,33 +0,0 @@
-# larch2_aufs - live 'hook' for mkinitcpio: aufs specific
-
-# Author: Michael Towers (gradgrind) <mt.42@web.de>
-#
-# This file is part of the larch project.
-#
-# larch is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# larch is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with larch; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-#
-#----------------------------------------------------------------------------
-# 2008.02.29
-
-run_hook ()
-{
- #!!! --- aufs specific
- # Need aufs module
- /bin/modprobe aufs
- ovlmnt="rr+wh"
- sqfmnt="rr"
- bropt="br:"
- utype="aufs"
-}
diff --git a/abs/core/linhes-live/lib/initcpio/hooks/larch3 b/abs/core/linhes-live/lib/initcpio/hooks/larch3
deleted file mode 100644
index b301aa9..0000000
--- a/abs/core/linhes-live/lib/initcpio/hooks/larch3
+++ /dev/null
@@ -1,196 +0,0 @@
-# larch3 - live 'hook' for mkinitcpio:
-# deal with c2r,
-# mount base system,
-# load overlay,
-# set up unioned root filesystem.
-# Also manages overlay merging.
-
-# Author: Michael Towers <gradgrind[at]online[dot]de>
-#
-# This file is part of the larch project.
-#
-# larch is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# larch is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with larch; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-#
-#----------------------------------------------------------------------------
-# 2008.04.04
-
-run_hook ()
-{
- if [ "x${LDEV}" = "x" ]; then
- err "Sorry, couldn't find boot medium ..."
- break="y"
- return
- fi
-
- /sbin/modprobe loop
-
- # Path to compressed base system
- sysSqf=${cdmount}/system.sqf
-
- ovlpath=${cdmount}
-
- # A possibility to use alternative files:
- if [ -f ${cdmount}/larch/boot-init ]; then
- . ${cdmount}/larch/boot-init
- fi
-
- # Path to compressed 'modifications' archive
- modsSqf=${ovlpath}/mods.sqf
- # Default overlay file and directory
- overlay=${ovlpath}/overlay.ovl
-
- # Make union root
- /bin/mkdir /union
-
- # Deal with new archives
- if [ -f ${overlay}_ ]; then
- /bin/mount -o remount,rw ${LDEV} ${cdmount}
- /bin/mv ${overlay} ${overlay}~
- /bin/mv ${overlay}_ ${overlay}
-
- if [ -f ${modsSqf}_ ]; then
- /bin/mv ${modsSqf} ${modsSqf}~
- /bin/mv ${modsSqf}_ ${modsSqf}
- fi
- /bin/mount -o remount,ro ${LDEV} ${cdmount}
- fi
-
- # Boot option copy-to-ram (c2r)
- if [ "${c2r}" = "y" ]; then
- msg_ ":: Copying base system to RAM, this will take a while ..."
- /bin/cat ${sysSqf} > /tfs/system.sqf
- if [ $? -ne 0 ]; then
- err "Sorry, not enough RAM"
- break="y"
- return
- fi
- sysSqf=/tfs/system.sqf
-
- msg_ ":: Copying mods archive to RAM, this might take a while ..."
- /bin/cat ${modsSqf} > /tfs/mods.sqf
- if [ $? -ne 0 ]; then
- err "Sorry, not enough RAM"
- break="y"
- return
- fi
- modsSqf=/tfs/mods.sqf
-
- # force use of swap (if available)
- :> /tfs/swapon
-
- elif [ "${swap}" = "y" ]; then
- :> /tfs/swapon
- fi
-
- msg_ ":: Mounting squashed images"
- /bin/mkdir /tfs/system
- #added sleep for 3 seconds, because well i don't know but it seems to fix things
- sleep 3
- # The klibc mount command doesn't support '-o loop'
- /bin/losetup /dev/loop0 ${sysSqf}
- /bin/mount -r -t squashfs /dev/loop0 /tfs/system
-
- # Make stuff in 'system' available by providing the loader and
- # library path
- ldli=$( cd /tfs/system; echo lib/ld-linux*.so.2 )
- /bin/ln -s /tfs/system/${ldli} /${ldli}
- export LD_LIBRARY_PATH=/tfs/system/lib:/tfs/system/usr/lib
-
- /bin/mkdir /tfs/mods
-
- # The klibc mount command doesn't support '-o loop'
- /bin/losetup /dev/loop1 ${modsSqf}
- /bin/mount -r -t squashfs /dev/loop1 /tfs/mods
-
- # Unpack the overlay
-
- msg_ ":: Initializing writable layer for union (overlay)"
- /tfs/system/usr/bin/lzop -d < ${overlay} | \
- /tfs/system/bin/tar -C /tfs -xf -
-
- # Copy the installation tidy-up script (for removing custom live-only stuff),
- # and any other files in 'larch/copy' directory
- if [ -d ${ovlpath}/larch/copy ]; then
- cd ${ovlpath}/larch/copy
- for f in *; do
- cat ${f} >/tfs/${f}
- done
- fi
-
- msg_ ":: Setting up union file system"
-
- layers="/tfs/overlay=rw:/tfs/mods=${ovlmnt}:/tfs/system=${sqfmnt}"
- /bin/mount -t ${utype} -o ${bropt}${layers} ${utype} /union
-
- echo "${utype}" > /tfs/utype
-
- # Minimal device nodes needed before udev does its work
- /bin/mkdir /union/dev
- /bin/mknod /union/dev/console c 5 1
- /bin/mknod /union/dev/null c 1 3
- /bin/mknod /union/dev/zero c 1 5
-
- # Make special directories
- /bin/mkdir -m 1777 /union/tmp
- /bin/mkdir /union/media
- /bin/mkdir /union/sys
- /bin/mkdir /union/proc
-
- # Make the tmpfs stuff accessible within the union
- /bin/mkdir /union/.livesys
- /bin/mount -o bind /tfs /union/.livesys
-
- /bin/mkdir /union/.livesys/medium
-
- /bin/mount -o bind /tfs/system /union/.livesys/system
- /bin/mount -o bind /tfs/overlay /union/.livesys/overlay
- /bin/mount -o bind ${cdmount} /union/.livesys/medium
-
- if [ "x${modsSqf}" != "x" ]; then
- /bin/mount -o move /tfs/mods /union/.livesys/mods
- fi
-
- # Remember the boot device
- echo "${LDEV}" > /tfs/bootdevice
-
- if [ "${c2r}" = "y" ]; then
- # Set flag to inform system of copy-to-ram
- :> /tfs/c2r
-
- # Unmount boot device
- /bin/umount ${cdmount}
- fi
-
- msg_ ":: End of live system set-up"
-
- # Now some tweaks to alter 'init' actions from non-larch hooks, etc.
- # Override rootdelay from usb hook
- if [ "x${larchdelay}" = "x" ]; then
- # To avoid spurious udevd pid numbers
- export rootdelay=1
- else
- # Allow adjustment via boot option
- export rootdelay=${larchdelay}
- fi
- # root must be set to something or other, even though larch doesn't
- # need it ...
- export root="/dev/loop0"
-}
-
-#######
-# The actual root switch occurs later, when 'init' execs 'kinit'.
-# I handle this by overwriting the 'kinit' binary with my own script.
-# This will unmount dev, sys and proc and then exec run-init.
-#######
diff --git a/abs/core/linhes-live/lib/initcpio/install/larch1 b/abs/core/linhes-live/lib/initcpio/install/larch1
deleted file mode 100644
index 56baf48..0000000
--- a/abs/core/linhes-live/lib/initcpio/install/larch1
+++ /dev/null
@@ -1,15 +0,0 @@
-install ()
-{
- MODULES="vfat isofs ext2 ext3 nls_cp437"
- BINARIES=""
- FILES=""
- SCRIPT="larch1"
-}
-
-help ()
-{
-cat<<HELPEOF
- This hook deals with booting a larch live CD. It is the first larch hook,
-creating a tmpfs and seeking the boot medium.
-HELPEOF
-}
diff --git a/abs/core/linhes-live/lib/initcpio/install/larch2 b/abs/core/linhes-live/lib/initcpio/install/larch2
deleted file mode 100644
index a906227..0000000
--- a/abs/core/linhes-live/lib/initcpio/install/larch2
+++ /dev/null
@@ -1,15 +0,0 @@
-install ()
-{
- MODULES="unionfs"
- BINARIES=""
- FILES=""
- SCRIPT="larch2"
-}
-
-help ()
-{
-cat<<HELPEOF
- This hook deals with booting a larch live CD. It handles selection of the
-desired unioning file system, here unionfs.
-HELPEOF
-}
diff --git a/abs/core/linhes-live/lib/initcpio/install/larch2_aufs b/abs/core/linhes-live/lib/initcpio/install/larch2_aufs
deleted file mode 100644
index 0e19de9..0000000
--- a/abs/core/linhes-live/lib/initcpio/install/larch2_aufs
+++ /dev/null
@@ -1,15 +0,0 @@
-install ()
-{
- MODULES="aufs"
- BINARIES=""
- FILES=""
- SCRIPT="larch2_aufs"
-}
-
-help ()
-{
-cat<<HELPEOF
- This hook deals with booting a larch live CD. It handles selection of the
-desired unioning file system, here aufs.
-HELPEOF
-}
diff --git a/abs/core/linhes-live/lib/initcpio/install/larch3 b/abs/core/linhes-live/lib/initcpio/install/larch3
deleted file mode 100644
index 7dad03c..0000000
--- a/abs/core/linhes-live/lib/initcpio/install/larch3
+++ /dev/null
@@ -1,18 +0,0 @@
-install ()
-{
- MODULES="squashfs loop reiserfs"
- BINARIES=""
- FILES=""
- SCRIPT="larch3"
-# add_file "/lib/initcpio/kinit" "/bin/kinit" ##### This doesn't work, so:
- sed -i 's|.*/usr/lib/klibc/bin/kinit\.shared.*||' "${FILELIST}"
- sed -i 's|/usr/lib/klibc/bin/kinit|/lib/initcpio/kinit|' "${FILELIST}"
-}
-
-help ()
-{
-cat<<HELPEOF
- This hook deals with booting a larch live CD. It is the last larch hook,
-setting up the tmpfs root file system.
-HELPEOF
-}
diff --git a/abs/core/linhes-live/lib/initcpio/kinit b/abs/core/linhes-live/lib/initcpio/kinit
deleted file mode 100755
index 7c86f4b..0000000
--- a/abs/core/linhes-live/lib/initcpio/kinit
+++ /dev/null
@@ -1,6 +0,0 @@
-#! /bin/sh
-
-umount /sys
-umount /proc
-umount /dev
-exec run-init -c /dev/console /union /sbin/init ${CMDLINE}
diff --git a/abs/core/linhes-live/lib/initcpio/mkinitcpio.conf b/abs/core/linhes-live/lib/initcpio/mkinitcpio.conf
deleted file mode 100644
index 79cca21..0000000
--- a/abs/core/linhes-live/lib/initcpio/mkinitcpio.conf
+++ /dev/null
@@ -1,54 +0,0 @@
-# vim:set ft=sh
-# MODULES
-# The following modules are loaded before any boot hooks are
-# run. Advanced users may wish to specify all system modules
-# in this array. For instance:
-# MODULES="piix ide_disk reiserfs"
-MODULES=""
-
-# BINARIES
-# This setting includes, into the CPIO image, and additional
-# binaries a given user may wish. This is run first, so may
-# be used to override the actual binaries used in a given hook.
-# (Existing files are NOT overwritten is already added)
-# BINARIES are dependancy parsed, so you may safely ignore libraries
-#BINARIES=""
-
-# FILES
-# This setting is similar to BINARIES above, however, files are added
-# as-is and are not parsed in anyway. This is useful for config files.
-# Some users may wish to include modprobe.conf for custom module options,
-# like so:
-# FILES="/etc/modprobe.conf"
-FILES=""
-
-# HOOKS
-# This is the most important setting in this file. The HOOKS control the
-# modules and scripts added to the image, and what happens at boot time.
-# Order is important, and it is recommended that you do not change the
-# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
-# help on a given hook.
-# 'base' is _required_ unless you know precisely what you are doing.
-# 'udev' is _required_ in order to automatically load modules
-# 'modload' may be used in place of 'udev', but is not recommended
-# 'filesystems' is _required_ unless you specify your fs modules in MODULES
-# Examples:
-# This setup specifies all modules in the MODULES setting above.
-# No raid, lvm, or encrypted root is needed.
-# HOOKS="base"
-#
-# This setup will autodetect all modules for your system and should
-# work as a sane default
-# HOOKS="base udev autodetect ide scsi sata filesystems"
-#
-# This setup will generate a 'full' image which supports most systems.
-# No autodetection is done.
-# HOOKS="base udev ide scsi sata usb filesystems"
-#
-# This setup assembles an ide raid array with an encrypted root FS.
-# Note: See 'mkinitcpio -H raid' for more information on raid devices.
-# HOOKS="base udev ide filesystems raid encrypt"
-#
-# This setup loads an LVM volume group on a usb device.
-# HOOKS="base udev usb filesystems lvm"
-HOOKS="base udev pata scsi sata usb larch1 larch2___aufs___ larch3"