6 files changed, 200 insertions, 0 deletions
diff --git a/abs/core/mdadm/PKGBUILD b/abs/core/mdadm/PKGBUILD
new file mode 100644
index 0000000..13c5c98
--- /dev/null
+++ b/abs/core/mdadm/PKGBUILD
@@ -0,0 +1,34 @@
+# $Id: PKGBUILD 356 2008-04-18 22:56:27Z aaron $
+# Maintainer: Judd Vinet <jvinet@zeroflux.org>
+pkgname=mdadm
+pkgver=2.6.4
+pkgrel=10
+pkgdesc="A tool for managing/monitoring Linux md device arrays, also known as Software RAID"
+arch=(i686 x86_64)
+license=('GPL')
+url="http://www.cse.unsw.edu.au/~neilb/source/mdadm/"
+groups=('base')
+depends=('glibc')
+backup=('etc/mdadm.conf')
+source=(ftp://ftp.kernel.org/pub/linux/utils/raid/mdadm/mdadm-$pkgver.tar.bz2 \
+        mdadm mdadm.conf raid-partitions_install raid-partitions_hook)
+replaces=('raidtools')
+md5sums=('b616697aecc870d5d580bd6e010472a3'
+         '6df172c8f77b280018cf87eb3d313f29'
+	 '0ce4c0f9770bf582a71228053566359d'
+	 '9de7e423ec9c6766b5f5d39915929003'
+	 '09d72c714b40b6fa1e8eab04c1dabd42')
+
+build() {
+  cd $startdir/src/$pkgname-$pkgver
+  make || return 1
+  make INSTALL=/bin/install DESTDIR=$startdir/pkg install
+  install -D -m644 ../mdadm.conf $startdir/pkg/etc/mdadm.conf
+  install -D -m755 ../mdadm $startdir/pkg/etc/rc.d/mdadm
+  install -D -m644 ../raid-partitions_install $startdir/pkg/lib/initcpio/install/raid-partitions
+  install -D -m644 ../raid-partitions_hook $startdir/pkg/lib/initcpio/hooks/raid-partitions
+  # a static binary is required for Arch's initrd
+  rm mdadm
+  make LDFLAGS+=-static || return 1
+  install -D -m755 mdadm $startdir/pkg/sbin/mdadm.static
+}
diff --git a/abs/core/mdadm/mdadm b/abs/core/mdadm/mdadm
new file mode 100755
index 0000000..e196f36
--- /dev/null
+++ b/abs/core/mdadm/mdadm
@@ -0,0 +1,37 @@
+#!/bin/bash
+
+. /etc/rc.conf
+. /etc/rc.d/functions
+
+PID=`pidof -o %PPID /sbin/mdadm`
+case "$1" in
+  start)
+    stat_busy "Starting mdadm RAID Monitor"
+    if [ -z "$PID" ]; then 
+       /sbin/mdadm --monitor --scan -i /var/run/mdadm.pid -f
+    fi
+    if [ ! -z "$PID" -o $? -gt 0 ]; then
+      stat_fail
+    else
+      add_daemon mdadm
+      stat_done
+    fi
+    ;;
+  stop)
+    stat_busy "Stopping mdadm RAID Monitor"
+    [ ! -z "$PID" ] && kill $PID &>/dev/null
+    if [ $? -gt 0 ]; then
+      stat_fail
+    else
+      rm_daemon mdadm
+      stat_done
+    fi
+    ;;
+  restart)
+    $0 stop
+    sleep 1
+    $0 start
+    ;;
+  *)
+    echo "usage: $0 {start|stop|restart}"  
+esac
diff --git a/abs/core/mdadm/mdadm-2.2-segfault.patch b/abs/core/mdadm/mdadm-2.2-segfault.patch
new file mode 100644
index 0000000..d956a20
--- /dev/null
+++ b/abs/core/mdadm/mdadm-2.2-segfault.patch
@@ -0,0 +1,12 @@
+diff -Naur mdadm-2.2-orig/Assemble.c mdadm-2.2/Assemble.c
+--- mdadm-2.2-orig/Assemble.c	2005-12-04 21:56:20.000000000 -0800
++++ mdadm-2.2/Assemble.c	2006-02-06 10:56:37.000000000 -0800
+@@ -219,7 +219,7 @@
+ 		}
+ 		if (dfd >= 0) close(dfd);
+ 
+-		if (ident->uuid_set && (!update && strcmp(update, "uuid")!= 0) &&
++		if (ident->uuid_set && (!update || strcmp(update, "uuid")!= 0) &&
+ 		    (!super || same_uuid(info.uuid, ident->uuid, tst->ss->swapuuid)==0)) {
+ 			if ((inargv && verbose >= 0) || verbose > 0)
+ 				fprintf(stderr, Name ": %s has wrong uuid.\n",
diff --git a/abs/core/mdadm/mdadm.conf b/abs/core/mdadm/mdadm.conf
new file mode 100644
index 0000000..0b2c712
--- /dev/null
+++ b/abs/core/mdadm/mdadm.conf
@@ -0,0 +1,64 @@
+# mdadm configuration file
+#
+# mdadm will function properly without the use of a configuration file,
+# but this file is useful for keeping track of arrays and member disks.
+# In general, a mdadm.conf file is created, and updated, after arrays
+# are created. This is the opposite behavior of /etc/raidtab which is
+# created prior to array construction.
+#
+#
+# the config file takes two types of lines:
+#
+#	DEVICE lines specify a list of devices of where to look for
+#	  potential member disks
+#
+#	ARRAY lines specify information about how to identify arrays so
+#	  so that they can be activated
+#
+
+
+# You can have more than one device line and use wild cards. The first 
+# example includes SCSI the first partition of SCSI disks /dev/sdb,
+# /dev/sdc, /dev/sdd, /dev/sdj, /dev/sdk, and /dev/sdl. The second 
+# line looks for array slices on IDE disks.
+#
+#DEVICE /dev/sd[bcdjkl]1
+#DEVICE /dev/hda1 /dev/hdb1
+#
+# The designation "partitions" will scan all partitions found in
+# /proc/partitions
+DEVICE partitions
+
+
+# ARRAY lines specify an array to assemble and a method of identification.
+# Arrays can currently be identified by using a UUID, superblock minor number,
+# or a listing of devices.
+#
+#	super-minor is usually the minor number of the metadevice
+#	UUID is the Universally Unique Identifier for the array
+# Each can be obtained using
+#
+# 	mdadm -D <md>
+#
+# To capture the UUIDs for all your RAID arrays to this file, run this:
+#    # mdadm -D --scan >>/etc/mdadm.conf
+#
+#ARRAY /dev/md0 UUID=3aaa0122:29827cfa:5331ad66:ca767371
+#ARRAY /dev/md1 super-minor=1
+#ARRAY /dev/md2 devices=/dev/hda1,/dev/hdb1
+#
+# ARRAY lines can also specify a "spare-group" for each array.  mdadm --monitor
+# will then move a spare between arrays in a spare-group if one array has a
+# failed drive but no spare
+#ARRAY /dev/md4 uuid=b23f3c6d:aec43a9f:fd65db85:369432df spare-group=group1
+#ARRAY /dev/md5 uuid=19464854:03f71b1b:e0df2edd:246cc977 spare-group=group1
+#
+
+
+# When used in --follow (aka --monitor) mode, mdadm needs a
+# mail address and/or a program.  To start mdadm's monitor mode, add
+# "mdadm" to your DAEMONS array in /etc/rc.conf
+#
+# If the lines are not found, mdadm will exit quietly
+#MAILADDR root@mydomain.tld
+#PROGRAM /usr/sbin/handle-mdadm-events
diff --git a/abs/core/mdadm/raid-partitions_hook b/abs/core/mdadm/raid-partitions_hook
new file mode 100644
index 0000000..bed1cb2
--- /dev/null
+++ b/abs/core/mdadm/raid-partitions_hook
@@ -0,0 +1,21 @@
+# vim: set ft=sh:
+run_hook ()
+{
+    #TODO scan for these somehow...
+    /sbin/modprobe -aq linear multipath raid0 raid1 raid456 raid10>/dev/null 2>&1
+    # md= can be specified multiple times.  The simplistic commandline
+    #  parsing does not handle this, so we will let mdassemble parse it
+    for i in $(replace $(echo $md) ',' ' '); do 
+	case $i in d[0-9])
+    		for i in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15; do 
+         		/sbin/mdadm --create -a mdp /dev/md_d$i >/dev/null 2>&1
+    		done
+    		mdadm --assemble --auto=mdp /dev/md_$(replace $(echo $md) ',' ' ')
+    		export USE_RAID_ARRAY=1
+		;;
+    	esac
+    done
+    if  ! [ "$USE_RAID_ARRAY" = "1" ] ; then
+      /bin/mdassemble ${CMDLINE}
+    fi
+}
diff --git a/abs/core/mdadm/raid-partitions_install b/abs/core/mdadm/raid-partitions_install
new file mode 100644
index 0000000..8fe5184
--- /dev/null
+++ b/abs/core/mdadm/raid-partitions_install
@@ -0,0 +1,32 @@
+# vim: set ft=sh:
+
+install ()
+{
+    MODULES=" $(checked_modules "drivers/md/*" | grep -v "dm-") "
+    BINARIES="mdadm"
+    FILES=""
+    SCRIPT="raid-partitions"
+    add_file "/usr/lib/klibc/bin/mdassemble" "/bin/mdassemble"
+}
+
+help ()
+{
+cat<<HELPEOF
+  This hook loads the necessary modules for an raid mdp/partitionable root device,
+  and assemble the raid device when run.
+
+  Kernel Parameters:
+  Specify all your md arrays with md= parameter:
+  ::: Example ::: md=d0,/dev/sda3,/dev/sda4 md=d1,/dev/hda1,/dev/hdb1
+  This will setup 2 md partitionable arrays 
+
+  Setup:
+  - to assemble a partitionable array:
+    md=d<md device no.>,dev0,dev1,...,devn
+
+  Parameters:
+  - <md device no.> = the number of the md device: 
+    0 means md0, 1 means md1, ...
+  - <dev0-devn>: e.g. /dev/hda1,/dev/hdc1,/dev/sda1,/dev/sdb1
+HELPEOF
+}