summaryrefslogtreecommitdiffstats
path: root/abs/core/php
diff options
context:
space:
mode:
Diffstat (limited to 'abs/core/php')
-rw-r--r--abs/core/php/PKGBUILD472
-rw-r--r--abs/core/php/php.ini1304
2 files changed, 1460 insertions, 316 deletions
diff --git a/abs/core/php/PKGBUILD b/abs/core/php/PKGBUILD
index 3a91cb1..404edc0 100644
--- a/abs/core/php/PKGBUILD
+++ b/abs/core/php/PKGBUILD
@@ -1,347 +1,187 @@
-# $Id: PKGBUILD 163752 2012-07-19 05:20:23Z pierre $
-# Maintainer: Pierre Schmitz <pierre@archlinux.de>
-
pkgbase=php
-pkgname=('php'
- 'php-cgi'
- 'php-apache'
- 'php-fpm'
- 'php-embed'
- 'php-pear'
- 'php-enchant'
- 'php-gd'
- 'php-intl'
- 'php-ldap'
- 'php-mcrypt'
- 'php-mssql'
- 'php-odbc'
- 'php-pgsql'
- 'php-pspell'
- 'php-snmp'
- 'php-sqlite'
- 'php-tidy'
- 'php-xsl')
-pkgver=5.4.5
-pkgrel=1
+pkgname=('php' 'php-cgi' 'php-pear')
+pkgver=5.3.3
+pkgrel=9
+_suhosinver=${pkgver}-0.9.10
+pkgdesc='A high-level scripting language'
arch=('i686' 'x86_64')
license=('PHP')
url='http://www.php.net'
-makedepends=('apache' 'imap' 'postgresql-libs' 'libldap' 'libvpx'
- 'sqlite' 'unixodbc' 'net-snmp' 'libzip' 'enchant' 'file' 'freetds'
- 'libmcrypt' 'tidyhtml' 'aspell' 'libltdl' 'libpng' 'libjpeg' 'icu'
- 'curl' 'libxslt' 'openssl' 'bzip2' 'db' 'gmp' 'freetype2')
-source=("http://www.php.net/distributions/${pkgbase}-${pkgver}.tar.bz2"
- 'php.ini.patch' 'apache.conf' 'rc.d.php-fpm' 'php-fpm.conf.in.patch'
- 'logrotate.d.php-fpm' 'php-fpm.service' 'php-fpm.tmpfiles')
-md5sums=('ffcc7f4dcf2b79d667fe0c110e6cb724'
- '0b0bc7a917fc592bdf11dcd3c5c255e9'
- 'dec2cbaad64e3abf4f0ec70e1de4e8e9'
- '6d46667e00d65933ec0c958279c0a803'
- '825e580dd5708d959b50944afa1b12b6'
- 'f56b5bb7e93c802ae8519182fbea3387'
- '86c73d481f3099e740e602869bacf637'
- 'c60343df74f8e1afb13b084d5c0e47ed')
+backup=('etc/php/php.ini')
+install=php.install
+depends=('glibc' 'readline' 'ncurses' 'libxml2' 'pcre')
+#makedepends=('apache' 'imap' 'postgresql-libs' 'mysql' 'libldap' \
+# 'libpng' 'libjpeg' 'sqlite3' 'unixodbc' 'net-snmp' \
+# 'libmcrypt' 'tidyhtml' 'aspell' 'libtool' 'freetype2' 'libjpeg' \
+# 'curl' 'libxslt' 'pam' 'openssl' 'bzip2' 'gdbm' 'db>=4.7')
+
+makedepends=('mysql' 'libpng' 'libjpeg' 'sqlite3' 'libmcrypt' 'libtool' \
+ 'freetype2' 'libjpeg' 'curl' 'libxslt' 'pam' 'openssl' 'bzip2' \
+ 'gdbm' 'db>=4.8.26')
+options=('emptydirs')
+source=("http://museum.php.net/php5/${pkgname}-${pkgver}.tar.bz2" \
+ "http://download.suhosin.org/suhosin-patch-${_suhosinver}.patch.gz" \
+ 'php.ini' 'apache.conf')
build() {
- phpconfig="--srcdir=../${pkgbase}-${pkgver} \
- --config-cache \
- --prefix=/usr \
- --sysconfdir=/etc/php \
- --localstatedir=/var \
- --with-layout=GNU \
- --with-config-file-path=/etc/php \
- --with-config-file-scan-dir=/etc/php/conf.d \
- --disable-rpath \
- --mandir=/usr/share/man \
- --without-pear \
- "
-
- phpextensions="--enable-bcmath=shared \
- --enable-calendar=shared \
- --enable-dba=shared \
- --enable-exif=shared \
- --enable-ftp=shared \
- --enable-gd-native-ttf \
- --enable-intl=shared \
- --enable-mbstring \
- --enable-phar=shared \
- --enable-posix=shared \
- --enable-shmop=shared \
- --enable-soap=shared \
- --enable-sockets=shared \
- --enable-sysvmsg=shared \
- --enable-sysvsem=shared \
- --enable-sysvshm=shared \
- --enable-zip=shared \
- --with-bz2=shared \
- --with-curl=shared \
- --with-db4=/usr \
- --with-enchant=shared,/usr \
- --with-freetype-dir=/usr \
- --with-gd=shared \
- --with-gdbm \
- --with-gettext=shared \
- --with-gmp=shared \
- --with-iconv=shared \
- --with-icu-dir=/usr \
- --with-imap-ssl \
- --with-imap=shared \
- --with-jpeg-dir=/usr \
- --with-vpx-dir=/usr \
- --with-ldap=shared \
- --with-ldap-sasl \
- --with-mcrypt=shared \
- --with-mhash \
- --with-mssql=shared \
- --with-mysql-sock=/var/run/mysqld/mysqld.sock \
- --with-mysql=shared,mysqlnd \
- --with-mysqli=shared,mysqlnd \
- --with-openssl=shared \
- --with-pcre-regex=/usr \
- --with-pdo-mysql=shared,mysqlnd \
- --with-pdo-odbc=shared,unixODBC,/usr \
- --with-pdo-pgsql=shared \
- --with-pdo-sqlite=shared,/usr \
- --with-pgsql=shared \
- --with-png-dir=/usr \
- --with-pspell=shared \
- --with-snmp=shared \
- --with-sqlite3=shared,/usr \
- --with-tidy=shared \
- --with-unixODBC=shared,/usr \
- --with-xmlrpc=shared \
- --with-xsl=shared \
- --with-zlib \
- "
-
- EXTENSION_DIR=/usr/lib/php/modules
- export EXTENSION_DIR
- PEAR_INSTALLDIR=/usr/share/pear
- export PEAR_INSTALLDIR
+ phpconfig="--srcdir=${srcdir}/${pkgbase}-${pkgver} \
+ --prefix=/usr \
+ --sysconfdir=/etc/php \
+ --with-layout=GNU \
+ --with-config-file-path=/etc/php \
+ --with-config-file-scan-dir=/etc/php/conf.d \
+ --enable-inline-optimization \
+ --disable-debug \
+ --disable-rpath \
+ --disable-static \
+ --enable-shared \
+ --mandir=/usr/share/man \
+ --without-pear \
+ "
+
+ phpextensions="--with-openssl=shared \
+ --with-zlib=shared \
+ --enable-bcmath=shared \
+ --with-bz2=shared \
+ --enable-calendar=shared \
+ --with-curl=shared \
+ --enable-dba=shared \
+ --without-db2 \
+ --without-db3 \
+ --with-db4=shared \
+ --with-gdbm=shared \
+ --enable-exif=shared \
+ --enable-ftp=shared \
+ --with-gd=shared \
+ --enable-gd-native-ttf \
+ --with-jpeg-dir=shared,/usr \
+ --with-png-dir=shared,/usr \
+ --with-gettext=shared \
+ --without-imap \
+ --without-imap-ssl \
+ --without-ldap \
+ --enable-mbstring=shared \
+ --with-mcrypt=shared \
+ --with-mysql=shared \
+ --with-mysql-sock=/tmp/mysql.sock \
+ --with-mysql=shared \
+ --with-mysqli=shared \
+ --without-unixODBC \
+ --enable-pdo=shared \
+ --with-pdo-mysql=shared \
+ --with-pdo-sqlite=shared \
+ --without-pdo-odbc \
+ --without-pdo-pgsql \
+ --with-sqlite=shared \
+ --without-pgsql \
+ --enable-shmop=shared \
+ --without-snmp \
+ --enable-soap=shared \
+ --enable-sqlite-utf8=shared \
+ --enable-sysvmsg=shared \
+ --enable-sysvsem=shared \
+ --enable-sysvshm=shared \
+ --without-tidy \
+ --with-xsl=shared \
+ --enable-zip=shared \
+ --enable-posix=shared \
+ --enable-sockets=shared \
+ --enable-xml \
+ --enable-session=shared \
+ --with-regex=php \
+ --with-pcre-regex=/usr \
+ --enable-mbstring=all \
+ --enable-mbregex \
+ --enable-json=shared \
+ --with-iconv=shared \
+ --with-xmlrpc=shared \
+ --without-pspell \
+ --with-freetype-dir=shared,/usr \
+ "
+ EXTENSION_DIR=/usr/lib/php/modules
+ export EXTENSION_DIR
+ PEAR_INSTALLDIR=/usr/share/pear
+ export PEAR_INSTALLDIR
cd ${srcdir}/${pkgbase}-${pkgver}
- # adjust paths
- patch -p0 -i ${srcdir}/php.ini.patch
- patch -p0 -i ${srcdir}/php-fpm.conf.in.patch
+ # apply suhosin patch
+ patch -p1 -i ${srcdir}/suhosin-patch-${_suhosinver}.patch || return 1
# php
- mkdir ${srcdir}/build-php
- cd ${srcdir}/build-php
- ln -s ../${pkgbase}-${pkgver}/configure
+ mkdir ${srcdir}/build-php
+ cd ${srcdir}/build-php
+ ln -s ../${pkgbase}-${pkgver}/configure
./configure ${phpconfig} \
--disable-cgi \
--with-readline \
--enable-pcntl \
- ${phpextensions}
- make
+ ${phpextensions} || return 1
+ make || return 1
# cgi and fcgi
- # reuse the previous run; this will save us a lot of time
- cp -a ${srcdir}/build-php ${srcdir}/build-cgi
- cd ${srcdir}/build-cgi
- ./configure ${phpconfig} \
- --disable-cli \
- --enable-cgi \
- ${phpextensions}
- make
-
- # apache
- cp -a ${srcdir}/build-php ${srcdir}/build-apache
- cd ${srcdir}/build-apache
- ./configure ${phpconfig} \
- --disable-cli \
- --with-apxs2 \
- ${phpextensions}
- make
-
- # fpm
- cp -a ${srcdir}/build-php ${srcdir}/build-fpm
- cd ${srcdir}/build-fpm
- ./configure ${phpconfig} \
- --disable-cli \
- --enable-fpm \
- --with-fpm-user=http \
- --with-fpm-group=http \
- ${phpextensions}
- make
-
- # embed
- cp -a ${srcdir}/build-php ${srcdir}/build-embed
- cd ${srcdir}/build-embed
+ cp -a ${srcdir}/build-php ${srcdir}/build-cgi
+ cd ${srcdir}/build-cgi
./configure ${phpconfig} \
- --disable-cli \
- --enable-embed=shared \
- ${phpextensions}
- make
-
- # pear
- cp -a ${srcdir}/build-php ${srcdir}/build-pear
- cd ${srcdir}/build-pear
- ./configure ${phpconfig} \
- --disable-cgi \
- --with-readline \
- --enable-pcntl \
- --with-pear \
- ${phpextensions}
- make
+ --disable-cli \
+ --enable-cgi \
+ ${phpextensions} || return 1
+ make || return 1
+
+ # pear
+ cp -a ${srcdir}/build-php ${srcdir}/build-pear
+ cd ${srcdir}/build-pear
+ ./configure ${phpconfig} \
+ --disable-cgi \
+ --with-readline \
+ --enable-pcntl \
+ --with-pear \
+ ${phpextensions}
+ make || return 1
}
-# check() {
-# cd ${srcdir}/build-php
-# make test
-# }
-
package_php() {
- pkgdesc='An HTML-embedded scripting language'
- depends=('pcre' 'libxml2' 'bzip2' 'curl')
- replaces=('php-fileinfo' 'php-gmp' 'php-curl')
- provides=('php-fileinfo' 'php-gmp' 'php-curl')
- conflicts=('php-fileinfo' 'php-gmp' 'php-curl')
- backup=('etc/php/php.ini')
+ pkgdesc='An HTML-embedded scripting language'
+ depends=('pcre' 'libxml2' 'bzip2' 'openssl')
+ replaces=('php')
+ provides=('php')
+ backup=('etc/php/php.ini')
cd ${srcdir}/build-php
- make -j1 INSTALL_ROOT=${pkgdir} install
- install -d -m755 ${pkgdir}/usr/share/pear
- # install php.ini
- install -D -m644 ${srcdir}/${pkgbase}-${pkgver}/php.ini-production ${pkgdir}/etc/php/php.ini
- install -d -m755 ${pkgdir}/etc/php/conf.d/
+ make INSTALL_ROOT=${pkgdir} install || return 1
+ install -d -m755 ${pkgdir}/usr/share/pear
+ # fix broken link
+ ln -sf phar.phar $pkgdir/usr/bin/phar
+ # install php.ini
+ install -D -m644 ${srcdir}/php.ini ${pkgdir}/etc/php/php.ini
+ install -d -m755 ${pkgdir}/etc/php/conf.d/
- # remove static modules
- rm -f ${pkgdir}/usr/lib/php/modules/*.a
- # remove modules provided by sub packages
- rm -f ${pkgdir}/usr/lib/php/modules/{enchant,gd,intl,ldap,mcrypt,mssql,odbc,pdo_odbc,pgsql,pdo_pgsql,pspell,snmp,sqlite3,pdo_sqlite,tidy,xsl}.so
- # remove empty directory
- rmdir ${pkgdir}/usr/include/php/include
+ # remove static modules
+ rm -f ${pkgdir}/usr/lib/php/modules/*.a
+ # remove modules provided by sub packages
+ rm -f ${pkgdir}/usr/lib/php/modules/{curl,enchant,gd,gmp,intl,ldap,mcrypt,mssql,odbc,pdo_odbc,pgsql,pdo_pgsql,pspell,snmp,sqlite3,pdo_sqlite,tidy,xsl}.so
}
package_php-cgi() {
- pkgdesc='CGI and FCGI SAPI for PHP'
- depends=('php')
+ pkgdesc='CGI and FCGI SAPI for PHP'
+ depends=('php' 'pcre' 'libxml2')
- install -D -m755 ${srcdir}/build-cgi/sapi/cgi/php-cgi ${pkgdir}/usr/bin/php-cgi
-}
-
-package_php-apache() {
- pkgdesc='Apache SAPI for PHP'
- depends=('php' 'apache')
- backup=('etc/httpd/conf/extra/php5_module.conf')
-
- install -D -m755 ${srcdir}/build-apache/libs/libphp5.so ${pkgdir}/usr/lib/httpd/modules/libphp5.so
- install -D -m644 ${srcdir}/apache.conf ${pkgdir}/etc/httpd/conf/extra/php5_module.conf
-}
-
-package_php-fpm() {
- pkgdesc='FastCGI Process Manager for PHP'
- depends=('php')
- backup=('etc/php/php-fpm.conf')
- install='php-fpm.install'
-
- install -D -m755 ${srcdir}/build-fpm/sapi/fpm/php-fpm ${pkgdir}/usr/sbin/php-fpm
- install -D -m644 ${srcdir}/build-fpm/sapi/fpm/php-fpm.8 ${pkgdir}/usr/share/man/man8/php-fpm.8
- install -D -m644 ${srcdir}/build-fpm/sapi/fpm/php-fpm.conf ${pkgdir}/etc/php/php-fpm.conf
- install -D -m755 ${srcdir}/rc.d.php-fpm ${pkgdir}/etc/rc.d/php-fpm
- install -D -m644 ${srcdir}/logrotate.d.php-fpm ${pkgdir}/etc/logrotate.d/php-fpm
- install -d -m755 ${pkgdir}/etc/php/fpm.d
- install -D -m644 ${srcdir}/php-fpm.tmpfiles ${pkgdir}/usr/lib/tmpfiles.d/php-fpm.conf
- install -D -m644 ${srcdir}/php-fpm.service ${pkgdir}/usr/lib/systemd/system/php-fpm.service
-}
-
-package_php-embed() {
- pkgdesc='Embed SAPI for PHP'
- depends=('php')
-
- install -D -m755 ${srcdir}/build-embed/libs/libphp5.so ${pkgdir}/usr/lib/libphp5.so
- install -D -m644 ${srcdir}/${pkgbase}-${pkgver}/sapi/embed/php_embed.h ${pkgdir}/usr/include/php/sapi/embed/php_embed.h
+ install -D -m755 ${srcdir}/build-cgi/sapi/cgi/php-cgi ${pkgdir}/usr/bin/php-cgi
}
package_php-pear() {
- pkgdesc='PHP Extension and Application Repository'
- depends=('php')
- backup=('etc/php/pear.conf')
-
- cd ${srcdir}/build-pear
- make install-pear INSTALL_ROOT=${pkgdir}
- rm -rf ${pkgdir}/usr/share/pear/.{channels,depdb,depdblock,filemap,lock,registry}
-}
-
-package_php-enchant() {
- depends=('php' 'enchant')
- pkgdesc='enchant module for PHP'
- install -D -m755 ${srcdir}/build-php/modules/enchant.so ${pkgdir}/usr/lib/php/modules/enchant.so
-}
-
-package_php-gd() {
- depends=('php' 'libpng' 'libjpeg' 'freetype2' 'libvpx')
- pkgdesc='gd module for PHP'
- install -D -m755 ${srcdir}/build-php/modules/gd.so ${pkgdir}/usr/lib/php/modules/gd.so
-}
-
-package_php-intl() {
- depends=('php' 'icu')
- pkgdesc='intl module for PHP'
- install -D -m755 ${srcdir}/build-php/modules/intl.so ${pkgdir}/usr/lib/php/modules/intl.so
-}
-
-package_php-ldap() {
- depends=('php' 'libldap')
- pkgdesc='ldap module for PHP'
- install -D -m755 ${srcdir}/build-php/modules/ldap.so ${pkgdir}/usr/lib/php/modules/ldap.so
-}
-
-package_php-mcrypt() {
- depends=('php' 'libmcrypt' 'libltdl')
- pkgdesc='mcrypt module for PHP'
- install -D -m755 ${srcdir}/build-php/modules/mcrypt.so ${pkgdir}/usr/lib/php/modules/mcrypt.so
-}
-
-package_php-mssql() {
- depends=('php' 'freetds')
- pkgdesc='mssql module for PHP'
- install -D -m755 ${srcdir}/build-php/modules/mssql.so ${pkgdir}/usr/lib/php/modules/mssql.so
-}
-
-package_php-odbc() {
- depends=('php' 'unixodbc')
- pkgdesc='ODBC modules for PHP'
- install -D -m755 ${srcdir}/build-php/modules/odbc.so ${pkgdir}/usr/lib/php/modules/odbc.so
- install -D -m755 ${srcdir}/build-php/modules/pdo_odbc.so ${pkgdir}/usr/lib/php/modules/pdo_odbc.so
-}
-
-package_php-pgsql() {
- depends=('php' 'postgresql-libs')
- pkgdesc='PostgreSQL modules for PHP'
- install -D -m755 ${srcdir}/build-php/modules/pgsql.so ${pkgdir}/usr/lib/php/modules/pgsql.so
- install -D -m755 ${srcdir}/build-php/modules/pdo_pgsql.so ${pkgdir}/usr/lib/php/modules/pdo_pgsql.so
-}
-
-package_php-pspell() {
- depends=('php' 'aspell')
- pkgdesc='pspell module for PHP'
- install -D -m755 ${srcdir}/build-php/modules/pspell.so ${pkgdir}/usr/lib/php/modules/pspell.so
-}
-
-package_php-snmp() {
- depends=('php' 'net-snmp')
- pkgdesc='snmp module for PHP'
- install -D -m755 ${srcdir}/build-php/modules/snmp.so ${pkgdir}/usr/lib/php/modules/snmp.so
-}
-
-package_php-sqlite() {
- depends=('php' 'sqlite')
- pkgdesc='sqlite module for PHP'
- install -D -m755 ${srcdir}/build-php/modules/sqlite3.so ${pkgdir}/usr/lib/php/modules/sqlite3.so
- install -D -m755 ${srcdir}/build-php/modules/pdo_sqlite.so ${pkgdir}/usr/lib/php/modules/pdo_sqlite.so
-}
-
-package_php-tidy() {
- depends=('php' 'tidyhtml')
- pkgdesc='tidy module for PHP'
- install -D -m755 ${srcdir}/build-php/modules/tidy.so ${pkgdir}/usr/lib/php/modules/tidy.so
-}
-
-package_php-xsl() {
- depends=('php' 'libxslt')
- pkgdesc='xsl module for PHP'
- install -D -m755 ${srcdir}/build-php/modules/xsl.so ${pkgdir}/usr/lib/php/modules/xsl.so
-}
+ pkgdesc='PHP Extension and Application Repository'
+ depends=('php' 'bash')
+ backup=('etc/php/pear.conf')
+
+ cd ${srcdir}/build-pear
+ make install-pear INSTALL_ROOT=${pkgdir} || return 1
+ local i
+ while read i; do
+ [ ! -e "$i" ] || rm -rf "$i"
+ done < <(find ${pkgdir} -name '.*')
+}
+md5sums=('21ceeeb232813c10283a5ca1b4c87b48'
+ 'b66b27c43b1332400ef8982944c3b95b'
+ 'b210db564281600c42f8eaa264eac3a5'
+ '96ca078be6729b665be8a865535a97bf')
diff --git a/abs/core/php/php.ini b/abs/core/php/php.ini
new file mode 100644
index 0000000..3f70777
--- /dev/null
+++ b/abs/core/php/php.ini
@@ -0,0 +1,1304 @@
+[PHP]
+
+;;;;;;;;;;;;;;;;;;;
+; About php.ini ;
+;;;;;;;;;;;;;;;;;;;
+; This file controls many aspects of PHP's behavior. In order for PHP to
+; read it, it must be named 'php.ini'. PHP looks for it in the current
+; working directory, in the path designated by the environment variable
+; PHPRC, and in the path that was defined in compile time (in that order).
+; The path in which the php.ini file is looked for can be overridden using
+; the -c argument in command line mode.
+;
+; The syntax of the file is extremely simple. Whitespace and Lines
+; beginning with a semicolon are silently ignored (as you probably guessed).
+; Section headers (e.g. [Foo]) are also silently ignored, even though
+; they might mean something in the future.
+;
+; Directives are specified using the following syntax:
+; directive = value
+; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
+;
+; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
+; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
+; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
+;
+; Expressions in the INI file are limited to bitwise operators and parentheses:
+; | bitwise OR
+; & bitwise AND
+; ~ bitwise NOT
+; ! boolean NOT
+;
+; Boolean flags can be turned on using the values 1, On, True or Yes.
+; They can be turned off using the values 0, Off, False or No.
+;
+; An empty string can be denoted by simply not writing anything after the equal
+; sign, or by using the None keyword:
+;
+; foo = ; sets foo to an empty string
+; foo = none ; sets foo to an empty string
+; foo = "none" ; sets foo to the string 'none'
+;
+; If you use constants in your value, and these constants belong to a
+; dynamically loaded extension (either a PHP extension or a Zend extension),
+; you may only use these constants *after* the line that loads the extension.
+;
+;
+;;;;;;;;;;;;;;;;;;;
+; About this file ;
+;;;;;;;;;;;;;;;;;;;
+; This is the recommended, PHP 5-style version of the php.ini-dist file. It
+; sets some non standard settings, that make PHP more efficient, more secure,
+; and encourage cleaner coding.
+;
+; The price is that with these settings, PHP may be incompatible with some
+; applications, and sometimes, more difficult to develop with. Using this
+; file is warmly recommended for production sites. As all of the changes from
+; the standard settings are thoroughly documented, you can go over each one,
+; and decide whether you want to use it or not.
+;
+; For general information about the php.ini file, please consult the php.ini-dist
+; file, included in your PHP distribution.
+;
+; This file is different from the php.ini-dist file in the fact that it features
+; different values for several directives, in order to improve performance, while
+; possibly breaking compatibility with the standard out-of-the-box behavior of
+; PHP. Please make sure you read what's different, and modify your scripts
+; accordingly, if you decide to use this file instead.
+;
+; - register_long_arrays = Off [Performance]
+; Disables registration of the older (and deprecated) long predefined array
+; variables ($HTTP_*_VARS). Instead, use the superglobals that were
+; introduced in PHP 4.1.0
+; - display_errors = Off [Security]
+; With this directive set to off, errors that occur during the execution of
+; scripts will no longer be displayed as a part of the script output, and thus,
+; will no longer be exposed to remote users. With some errors, the error message
+; content may expose information about your script, web server, or database
+; server that may be exploitable for hacking. Production sites should have this
+; directive set to off.
+; - log_errors = On [Security]
+; This directive complements the above one. Any errors that occur during the
+; execution of your script will be logged (typically, to your server's error log,
+; but can be configured in several ways). Along with setting display_errors to off,
+; this setup gives you the ability to fully understand what may have gone wrong,
+; without exposing any sensitive information to remote users.
+; - output_buffering = 4096 [Performance]
+; Set a 4KB output buffer. Enabling output buffering typically results in less
+; writes, and sometimes less packets sent on the wire, which can often lead to
+; better performance. The gain this directive actually yields greatly depends
+; on which Web server you're working with, and what kind of scripts you're using.
+; - register_argc_argv = Off [Performance]
+; Disables registration of the somewhat redundant $argv and $argc global
+; variables.
+; - magic_quotes_gpc = Off [Performance]
+; Input data is no longer escaped with slashes so that it can be sent into
+; SQL databases without further manipulation. Instead, you should use the
+; function addslashes() on each input element you wish to send to a database.
+; - variables_order = "GPCS" [Performance]
+; The environment variables are not hashed into the $_ENV. To access
+; environment variables, you can use getenv() instead.
+; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
+; By default, PHP suppresses errors of type E_NOTICE. These error messages
+; are emitted for non-critical errors, but that could be a symptom of a bigger
+; problem. Most notably, this will cause error messages about the use
+; of uninitialized variables to be displayed.
+; - allow_call_time_pass_reference = Off [Code cleanliness]
+; It's not possible to decide to force a variable to be passed by reference
+; when calling a function. The PHP 4 style to do this is by making the
+; function require the relevant argument by reference.
+; - short_open_tag = Off [Portability]
+; Using short tags is discouraged when developing code meant for redistribution
+; since short tags may not be supported on the target server.
+
+;;;;;;;;;;;;;;;;;;;;
+; Language Options ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Enable the PHP scripting language engine under Apache.
+engine = On
+
+; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
+zend.ze1_compatibility_mode = Off
+
+; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
+; NOTE: Using short tags should be avoided when developing applications or
+; libraries that are meant for redistribution, or deployment on PHP
+; servers which are not under your control, because short tags may not
+; be supported on the target server. For portable, redistributable code,
+; be sure not to use short tags.
+short_open_tag = On
+
+; Allow ASP-style <% %> tags.
+asp_tags = Off
+
+; The number of significant digits displayed in floating point numbers.
+precision = 14
+
+; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
+y2k_compliance = On
+
+; Output buffering allows you to send header lines (including cookies) even
+; after you send body content, at the price of slowing PHP's output layer a
+; bit. You can enable output buffering during runtime by calling the output
+; buffering functions. You can also enable output buffering for all files by
+; setting this directive to On. If you wish to limit the size of the buffer
+; to a certain size - you can use a maximum number of bytes instead of 'On', as
+; a value for this directive (e.g., output_buffering=4096).
+output_buffering = 4096
+
+; You can redirect all of the output of your scripts to a function. For
+; example, if you set output_handler to "mb_output_handler", character
+; encoding will be transparently converted to the specified encoding.
+; Setting any output handler automatically turns on output buffering.
+; Note: People who wrote portable scripts should not depend on this ini
+; directive. Instead, explicitly set the output handler using ob_start().
+; Using this ini directive may cause problems unless you know what script
+; is doing.
+; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
+; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
+; Note: output_handler must be empty if this is set 'On' !!!!
+; Instead you must use zlib.output_handler.
+;output_handler =
+
+; Transparent output compression using the zlib library
+; Valid values for this option are 'off', 'on', or a specific buffer size
+; to be used for compression (default is 4KB)
+; Note: Resulting chunk size may vary due to nature of compression. PHP
+; outputs chunks that are few hundreds bytes each as a result of
+; compression. If you prefer a larger chunk size for better
+; performance, enable output_buffering in addition.
+; Note: You need to use zlib.output_handler instead of the standard
+; output_handler, or otherwise the output will be corrupted.
+zlib.output_compression = Off
+;zlib.output_compression_level = -1
+
+; You cannot specify additional output handlers if zlib.output_compression
+; is activated here. This setting does the same as output_handler but in
+; a different order.
+;zlib.output_handler =
+
+; Implicit flush tells PHP to tell the output layer to flush itself
+; automatically after every output block. This is equivalent to calling the
+; PHP function flush() after each and every call to print() or echo() and each
+; and every HTML block. Turning this option on has serious performance
+; implications and is generally recommended for debugging purposes only.
+implicit_flush = Off
+
+; The unserialize callback function will be called (with the undefined class'
+; name as parameter), if the unserializer finds an undefined class
+; which should be instantiated.
+; A warning appears if the specified function is not defined, or if the
+; function doesn't include/implement the missing class.
+; So only set this entry, if you really want to implement such a
+; callback-function.
+unserialize_callback_func=
+
+; When floats & doubles are serialized store serialize_precision significant
+; digits after the floating point. The default value ensures that when floats
+; are decoded with unserialize, the data will remain the same.
+serialize_precision = 100
+
+; Whether to enable the ability to force arguments to be passed by reference
+; at function call time. This method is deprecated and is likely to be
+; unsupported in future versions of PHP/Zend. The encouraged method of
+; specifying which arguments should be passed by reference is in the function
+; declaration. You're encouraged to try and turn this option Off and make
+; sure your scripts work properly with it in order to ensure they will work
+; with future versions of the language (you will receive a warning each time
+; you use this feature, and the argument will be passed by value instead of by
+; reference).
+allow_call_time_pass_reference = Off
+
+;
+; Safe Mode
+;
+safe_mode = Off
+
+; By default, Safe Mode does a UID compare check when
+; opening files. If you want to relax this to a GID compare,
+; then turn on safe_mode_gid.
+safe_mode_gid = Off
+
+; When safe_mode is on, UID/GID checks are bypassed when
+; including files from this directory and its subdirectories.
+; (directory must also be in include_path or full path must
+; be used when including)
+safe_mode_include_dir =
+
+; When safe_mode is on, only executables located in the safe_mode_exec_dir
+; will be allowed to be executed via the exec family of functions.
+safe_mode_exec_dir =
+
+; Setting certain environment variables may be a potential security breach.
+; This directive contains a comma-delimited list of prefixes. In Safe Mode,
+; the user may only alter environment variables whose names begin with the
+; prefixes supplied here. By default, users will only be able to set
+; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
+;
+; Note: If this directive is empty, PHP will let the user modify ANY
+; environment variable!
+safe_mode_allowed_env_vars = PHP_
+
+; This directive contains a comma-delimited list of environment variables that
+; the end user won't be able to change using putenv(). These variables will be
+; protected even if safe_mode_allowed_env_vars is set to allow to change them.
+safe_mode_protected_env_vars = LD_LIBRARY_PATH
+
+; open_basedir, if set, limits all file operations to the defined directory
+; and below. This directive makes most sense if used in a per-directory
+; or per-virtualhost web server configuration file. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+;open_basedir = /data/srv/httpd/htdocs/:/home/:/tmp/:/usr/share/pear/:/data/srv/tmp:/usr/share/mythtv/mythweather/scripts/:/data/srv/httpd/htdocs/mythweb/data/video:/myth/ipodfeed:/data/srv/httpd/htdocs/archive:/etc:/myth:/media
+
+; This directive allows you to disable certain functions for security reasons.
+; It receives a comma-delimited list of function names. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+disable_functions =
+
+; This directive allows you to disable certain classes for security reasons.
+; It receives a comma-delimited list of class names. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+disable_classes =
+
+; Colors for Syntax Highlighting mode. Anything that's acceptable in
+; <span style="color: ???????"> would work.
+;highlight.string = #DD0000
+;highlight.comment = #FF9900
+;highlight.keyword = #007700
+;highlight.bg = #FFFFFF
+;highlight.default = #0000BB
+;highlight.html = #000000
+
+; If enabled, the request will be allowed to complete even if the user aborts
+; the request. Consider enabling it if executing long request, which may end up
+; being interrupted by the user or a browser timing out.
+; ignore_user_abort = On
+
+; Determines the size of the realpath cache to be used by PHP. This value should
+; be increased on systems where PHP opens many files to reflect the quantity of
+; the file operations performed.
+; realpath_cache_size=16k
+
+; Duration of time, in seconds for which to cache realpath information for a given
+; file or directory. For systems with rarely changing files, consider increasing this
+; value.
+; realpath_cache_ttl=120
+
+;
+; Misc
+;
+; Decides whether PHP may expose the fact that it is installed on the server
+; (e.g. by adding its signature to the Web server header). It is no security
+; threat in any way, but it makes it possible to determine whether you use PHP
+; on your server or not.
+expose_php = Off
+
+
+;;;;;;;;;;;;;;;;;;;
+; Resource Limits ;
+;;;;;;;;;;;;;;;;;;;
+
+max_execution_time = 30 ; Maximum execution time of each script, in seconds
+max_input_time = 60 ; Maximum amount of time each script may spend parsing request data
+;max_input_nesting_level = 64 ; Maximum input variable nesting level
+memory_limit = 64M ; Maximum amount of memory a script may consume (32MB)
+
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Error handling and logging ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; error_reporting is a bit-field. Or each number up to get desired error
+; reporting level
+; E_ALL - All errors and warnings (doesn't include E_STRICT)
+; E_ERROR - fatal run-time errors
+; E_RECOVERABLE_ERROR - almost fatal run-time errors
+; E_WARNING - run-time warnings (non-fatal errors)
+; E_PARSE - compile-time parse errors
+; E_NOTICE - run-time notices (these are warnings which often result
+; from a bug in your code, but it's possible that it was
+; intentional (e.g., using an uninitialized variable and
+; relying on the fact it's automatically initialized to an
+; empty string)
+; E_STRICT - run-time notices, enable to have PHP suggest changes
+; to your code which will ensure the best interoperability
+; and forward compatibility of your code
+; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
+; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
+; initial startup
+; E_COMPILE_ERROR - fatal compile-time errors
+; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
+; E_USER_ERROR - user-generated error message
+; E_USER_WARNING - user-generated warning message
+; E_USER_NOTICE - user-generated notice message
+;
+; Examples:
+;
+; - Show all errors, except for notices and coding standards warnings
+;
+error_reporting = E_ALL & ~E_NOTICE
+;
+; - Show all errors, except for notices
+;
+;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
+;
+; - Show only errors
+;
+;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR
+;
+; - Show all errors, except coding standards warnings
+;
+error_reporting = E_ALL
+
+; Print out errors (as a part of the output). For production web sites,
+; you're strongly encouraged to turn this feature off, and use error logging
+; instead (see below). Keeping display_errors enabled on a production web site
+; may reveal security information to end users, such as file paths on your Web
+; server, your database schema or other information.
+;
+; possible values for display_errors:
+;
+; Off - Do not display any errors
+; stderr - Display errors to STDERR (affects only CGI/CLI binaries!)
+; On or stdout - Display errors to STDOUT (default)
+;
+; To output errors to STDERR with CGI/CLI:
+display_errors = "stderr"
+;
+; Default
+;
+;display_errors = on
+
+; Even when display_errors is on, errors that occur during PHP's startup
+; sequence are not displayed. It's strongly recommended to keep
+; display_startup_errors off, except for when debugging.
+display_startup_errors = Off
+
+; Log errors into a log file (server-specific log, stderr, or error_log (below))
+; As stated above, you're strongly advised to use error logging in place of
+; error displaying on production web sites.
+log_errors = On
+
+; Set maximum length of log_errors. In error_log information about the source is
+; added. The default is 1024 and 0 allows to not apply any maximum length at all.
+log_errors_max_len = 1024
+
+; Do not log repeated messages. Repeated errors must occur in same file on same
+; line until ignore_repeated_source is set true.
+ignore_repeated_errors = Off
+
+; Ignore source of message when ignoring repeated messages. When this setting
+; is On you will not log errors with repeated messages from different files or
+; source lines.
+ignore_repeated_source = Off
+
+; If this parameter is set to Off, then memory leaks will not be shown (on
+; stdout or in the log). This has only effect in a debug compile, and if
+; error reporting includes E_WARNING in the allowed list
+report_memleaks = Off
+
+;report_zend_debug = 0
+
+; Store the last error/warning message in $php_errormsg (boolean).
+track_errors = Off
+
+; Disable the inclusion of HTML tags in error messages.
+; Note: Never use this feature for production boxes.
+;html_errors = Off
+
+; If html_errors is set On PHP produces clickable error messages that direct
+; to a page describing the error or function causing the error in detail.
+; You can download a copy of the PHP manual from http://www.php.net/docs.php
+; and change docref_root to the base URL of your local copy including the
+; leading '/'. You must also specify the file extension being used including
+; the dot.
+; Note: Never use this feature for production boxes.
+;docref_root = "/phpmanual/"
+;docref_ext = .html
+
+; String to output before an error message.
+;error_prepend_string = "<font color=ff0000>"
+
+; String to output after an error message.
+;error_append_string = "</font>"
+
+; Log errors to specified file.
+;error_log = filename
+
+; Log errors to syslog.
+error_log = syslog
+
+
+;;;;;;;;;;;;;;;;;
+; Data Handling ;
+;;;;;;;;;;;;;;;;;
+;
+; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
+
+; The separator used in PHP generated URLs to separate arguments.
+; Default is "&".
+;arg_separator.output = "&amp;"
+
+; List of separator(s) used by PHP to parse input URLs into variables.
+; Default is "&".
+; NOTE: Every character in this directive is considered as separator!
+;arg_separator.input = ";&"
+
+; This directive describes the order in which PHP registers GET, POST, Cookie,
+; Environment and Built-in variables (G, P, C, E & S respectively, often
+; referred to as EGPCS or GPC). Registration is done from left to right, newer
+; values override older values.
+variables_order = "GPCS"
+
+; Whether or not to register the EGPCS variables as global variables. You may
+; want to turn this off if you don't want to clutter your scripts' global scope
+; with user data. This makes most sense when coupled with track_vars - in which
+; case you can access all of the GPC variables through the $HTTP_*_VARS[],
+; variables.
+;
+; You should do your best to write your scripts so that they do not require
+; register_globals to be on; Using form variables as globals can easily lead
+; to possible security problems, if the code is not very well thought of.
+register_globals = Off
+
+; Whether or not to register the old-style input arrays, HTTP_GET_VARS
+; and friends. If you're not using them, it's recommended to turn them off,
+; for performance reasons.
+register_long_arrays = Off
+
+; This directive tells PHP whether to declare the argv&argc variables (that
+; would contain the GET information). If you don't use these variables, you
+; should turn it off for increased performance.
+register_argc_argv = Off
+
+; When enabled, the SERVER and ENV variables are created when they're first
+; used (Just In Time) instead of when the script starts. If these variables
+; are not used within a script, having this directive on will result in a
+; performance gain. The PHP directives register_globals, register_long_arrays,
+; and register_argc_argv must be disabled for this directive to have any affect.
+auto_globals_jit = On
+
+; Maximum size of POST data that PHP will accept.
+post_max_size = 8M
+
+; Magic quotes
+;
+
+; Magic quotes for incoming GET/POST/Cookie data.
+magic_quotes_gpc = Off
+
+; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
+magic_quotes_runtime = Off
+
+; Use Sybase-style magic quotes (escape ' with '' instead of \').
+magic_quotes_sybase = Off
+
+; Automatically add files before or after any PHP document.
+auto_prepend_file =
+auto_append_file =
+
+; As of 4.0b4, PHP always outputs a character encoding by default in
+; the Content-type: header. To disable sending of the charset, simply
+; set it to be empty.
+;
+; PHP's built-in default is text/html
+default_mimetype = "text/html"
+;default_charset = "iso-8859-1"
+
+; Always populate the $HTTP_RAW_POST_DATA variable.
+;always_populate_raw_post_data = On
+
+
+;;;;;;;;;;;;;;;;;;;;;;;;;
+; Paths and Directories ;
+;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; UNIX: "/path1:/path2"
+include_path = ".:/usr/share/pear"
+
+; The root of the PHP pages, used only if nonempty.
+; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
+; if you are running php as a CGI under any web server (other than IIS)
+; see documentation for security issues. The alternate is to use the
+; cgi.force_redirect configuration below
+doc_root =
+
+; The directory under which PHP opens the script using /~username used only
+; if nonempty.
+user_dir =
+
+; Directory in which the loadable extensions (modules) reside.
+extension_dir = "/usr/lib/php/modules/"
+
+; Whether or not to enable the dl() function. The dl() function does NOT work
+; properly in multithreaded servers, such as IIS or Zeus, and is automatically
+; disabled on them.
+enable_dl = Off
+
+; cgi.force_redirect is necessary to provide security running PHP as a CGI under
+; most web servers. Left undefined, PHP turns this on by default. You can
+; turn it off here AT YOUR OWN RISK
+; **You CAN safely turn this off for IIS, in fact, you MUST.**
+; cgi.force_redirect = 1
+
+; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
+; every request.
+; cgi.nph = 1
+
+; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
+; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
+; will look for to know it is OK to continue execution. Setting this variable MAY
+; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
+; cgi.redirect_status_env = ;
+
+; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
+; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
+; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
+; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting
+; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
+; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
+; cgi.fix_pathinfo=1
+
+; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
+; security tokens of the calling client. This allows IIS to define the
+; security context that the request runs under. mod_fastcgi under Apache
+; does not currently support this feature (03/17/2002)
+; Set to 1 if running under IIS. Default is zero.
+; fastcgi.impersonate = 1;
+
+; Disable logging through FastCGI connection
+; fastcgi.logging = 0
+
+; cgi.rfc2616_headers configuration option tells PHP what type of headers to
+; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
+; is supported by Apache. When this option is set to 1 PHP will send
+; RFC2616 compliant header.
+; Default is zero.
+;cgi.rfc2616_headers = 0
+
+
+;;;;;;;;;;;;;;;;
+; File Uploads ;
+;;;;;;;;;;;;;;;;
+
+; Whether to allow HTTP file uploads.
+file_uploads = On
+
+; Temporary directory for HTTP uploaded files (will use system default if not
+; specified).
+;upload_tmp_dir =
+
+; Maximum allowed size for uploaded files.
+upload_max_filesize = 2M
+
+
+;;;;;;;;;;;;;;;;;;
+; Fopen wrappers ;
+;;;;;;;;;;;;;;;;;;
+
+; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
+allow_url_fopen = on
+
+; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
+allow_url_include = on
+
+; Define the anonymous ftp password (your email address)
+;from="john@doe.com"
+
+; Define the User-Agent string
+; user_agent="PHP"
+
+; Default timeout for socket based streams (seconds)
+default_socket_timeout = 60
+
+;;;;;;;;;;;;;;;;;;;;;;
+; Dynamic Extensions ;
+;;;;;;;;;;;;;;;;;;;;;;
+;
+; If you wish to have an extension loaded automatically, use the following
+; syntax:
+;
+; extension=modulename.extension
+;
+; For example, under UNIX:
+;
+; extension=msql.so
+;
+; Note that it should be the name of the module only; no directory information
+; needs to go here. Specify the location of the extension with the
+; extension_dir directive above.
+
+;;;;;;;;;;;;;;;;;;;
+; Module Settings ;
+;;;;;;;;;;;;;;;;;;;
+
+[Date]
+; Defines the default timezone used by the date functions
+;date.timezone =
+
+;date.default_latitude = 31.7667
+;date.default_longitude = 35.2333
+
+;date.sunrise_zenith = 90.583333
+;date.sunset_zenith = 90.583333
+
+[filter]
+;filter.default = unsafe_raw
+;filter.default_flags =
+
+[iconv]
+;iconv.input_encoding = ISO-8859-1
+;iconv.internal_encoding = ISO-8859-1
+;iconv.output_encoding = ISO-8859-1
+
+[sqlite]
+;sqlite.assoc_case = 0
+
+[xmlrpc]
+;xmlrpc_error_number = 0
+;xmlrpc_errors = 0
+
+[Pcre]
+;PCRE library backtracking limit.
+;pcre.backtrack_limit=100000
+
+;PCRE library recursion limit.
+;Please note that if you set this value to a high number you may consume all
+;the available process stack and eventually crash PHP (due to reaching the
+;stack size limit imposed by the Operating System).
+;pcre.recursion_limit=100000
+
+[Syslog]
+; Whether or not to define the various syslog variables (e.g. $LOG_PID,
+; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
+; runtime, you can define these variables by calling define_syslog_variables().
+define_syslog_variables = Off
+
+[mail function]
+; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
+;sendmail_path =
+
+; Force the addition of the specified parameters to be passed as extra parameters
+; to the sendmail binary. These parameters will always replace the value of
+; the 5th parameter to mail(), even in safe mode.
+;mail.force_extra_parameters =
+
+[SQL]
+sql.safe_mode = Off
+
+[ODBC]
+;odbc.default_db = Not yet implemented
+;odbc.default_user = Not yet implemented
+;odbc.default_pw = Not yet implemented
+
+; Allow or prevent persistent links.
+odbc.allow_persistent = On
+
+; Check that a connection is still valid before reuse.
+odbc.check_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+odbc.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+odbc.max_links = -1
+
+; Handling of LONG fields. Returns number of bytes to variables. 0 means
+; passthru.
+odbc.defaultlrl = 4096
+
+; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
+; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
+; of uodbc.defaultlrl and uodbc.defaultbinmode
+odbc.defaultbinmode = 1
+
+[MySQL]
+; Allow or prevent persistent links.
+mysql.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+mysql.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+mysql.max_links = -1
+
+; Default port number for mysql_connect(). If unset, mysql_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order).
+mysql.default_port =
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+mysql.default_socket = /var/run/mysqld/mysqld.sock
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+mysql.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+mysql.default_user =
+
+; Default password for mysql_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+mysql.default_password =
+
+; Maximum time (in seconds) for connect timeout. -1 means no limit
+mysql.connect_timeout = 60
+
+; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
+; SQL-Errors will be displayed.
+mysql.trace_mode = Off
+
+[MySQLi]
+
+; Maximum number of links. -1 means no limit.
+mysqli.max_links = -1
+
+; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order).
+mysqli.default_port = 3306
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+mysqli.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+mysqli.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+mysqli.default_user =
+
+; Default password for mysqli_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+mysqli.default_pw =
+
+; Allow or prevent reconnect
+mysqli.reconnect = Off
+
+[mSQL]
+; Allow or prevent persistent links.
+msql.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+msql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+msql.max_links = -1
+
+[OCI8]
+; enables privileged connections using external credentials (OCI_SYSOPER, OCI_SYSDBA)
+;oci8.privileged_connect = Off
+
+; Connection: The maximum number of persistent OCI8 connections per
+; process. Using -1 means no limit.
+;oci8.max_persistent = -1
+
+; Connection: The maximum number of seconds a process is allowed to
+; maintain an idle persistent connection. Using -1 means idle
+; persistent connections will be maintained forever.
+;oci8.persistent_timeout = -1
+
+; Connection: The number of seconds that must pass before issuing a
+; ping during oci_pconnect() to check the connection validity. When
+; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
+; pings completely.
+;oci8.ping_interval = 60
+
+; Tuning: This option enables statement caching, and specifies how
+; many statements to cache. Using 0 disables statement caching.
+;oci8.statement_cache_size = 20
+
+; Tuning: Enables statement prefetching and sets the default number of
+; rows that will be fetched automatically after statement execution.
+;oci8.default_prefetch = 10
+
+; Compatibility. Using On means oci_close() will not close
+; oci_connect() and oci_new_connect() connections.
+;oci8.old_oci_close_semantics = Off
+
+[PostgresSQL]
+; Allow or prevent persistent links.
+pgsql.allow_persistent = On
+
+; Detect broken persistent links always with pg_pconnect().
+; Auto reset feature requires a little overheads.
+pgsql.auto_reset_persistent = Off
+
+; Maximum number of persistent links. -1 means no limit.
+pgsql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+pgsql.max_links = -1
+
+; Ignore PostgreSQL backends Notice message or not.
+; Notice message logging require a little overheads.
+pgsql.ignore_notice = 0
+
+; Log PostgreSQL backends Noitce message or not.
+; Unless pgsql.ignore_notice=0, module cannot log notice message.
+pgsql.log_notice = 0
+
+[Sybase]
+; Allow or prevent persistent links.
+sybase.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+sybase.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+sybase.max_links = -1
+
+;sybase.interface_file = "/usr/sybase/interfaces"
+
+; Minimum error severity to display.
+sybase.min_error_severity = 10
+
+; Minimum message severity to display.
+sybase.min_message_severity = 10
+
+; Compatibility mode with old versions of PHP 3.0.
+; If on, this will cause PHP to automatically assign types to results according
+; to their Sybase type, instead of treating them all as strings. This
+; compatibility mode will probably not stay around forever, so try applying
+; whatever necessary changes to your code, and turn it off.
+sybase.compatability_mode = Off
+
+[Sybase-CT]
+; Allow or prevent persistent links.
+sybct.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+sybct.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+sybct.max_links = -1
+
+; Minimum server message severity to display.
+sybct.min_server_severity = 10
+
+; Minimum client message severity to display.
+sybct.min_client_severity = 10
+
+[bcmath]
+; Number of decimal digits for all bcmath functions.
+bcmath.scale = 0
+
+[browscap]
+;browscap = extra/browscap.ini
+
+[Informix]
+; Default host for ifx_connect() (doesn't apply in safe mode).
+ifx.default_host =
+
+; Default user for ifx_connect() (doesn't apply in safe mode).
+ifx.default_user =
+
+; Default password for ifx_connect() (doesn't apply in safe mode).
+ifx.default_password =
+
+; Allow or prevent persistent links.
+ifx.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+ifx.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+ifx.max_links = -1
+
+; If on, select statements return the contents of a text blob instead of its id.
+ifx.textasvarchar = 0
+
+; If on, select statements return the contents of a byte blob instead of its id.
+ifx.byteasvarchar = 0
+
+; Trailing blanks are stripped from fixed-length char columns. May help the
+; life of Informix SE users.
+ifx.charasvarchar = 0
+
+; If on, the contents of text and byte blobs are dumped to a file instead of
+; keeping them in memory.
+ifx.blobinfile = 0
+
+; NULL's are returned as empty strings, unless this is set to 1. In that case,
+; NULL's are returned as string 'NULL'.
+ifx.nullformat = 0
+
+[Session]
+; Handler used to store/retrieve data.
+session.save_handler = files
+
+; Argument passed to save_handler. In the case of files, this is the path
+; where data files are stored.
+;
+; As of PHP 4.0.1, you can define the path as:
+;
+; session.save_path = "N;/path"
+;
+; where N is an integer. Instead of storing all the session files in
+; /path, what this will do is use subdirectories N-levels deep, and
+; store the session data in those directories. This is useful if you
+; or your OS have problems with lots of files in one directory, and is
+; a more efficient layout for servers that handle lots of sessions.
+;
+; NOTE 1: PHP will not create this directory structure automatically.
+; You can use the script in the ext/session dir for that purpose.
+; NOTE 2: See the section on garbage collection below if you choose to
+; use subdirectories for session storage
+;
+; The file storage module creates files using mode 600 by default.
+; You can change that by using
+;
+; session.save_path = "N;MODE;/path"
+;
+; where MODE is the octal representation of the mode. Note that this
+; does not overwrite the process's umask.
+session.save_path = "/tmp"
+
+; Whether to use cookies.
+session.use_cookies = 1
+
+;session.cookie_secure =
+
+; This option enables administrators to make their users invulnerable to
+; attacks which involve passing session ids in URLs; defaults to 0.
+; session.use_only_cookies = 1
+
+; Name of the session (used as cookie name).
+session.name = PHPSESSID
+
+; Initialize session on request startup.
+session.auto_start = 0
+
+; Lifetime in seconds of cookie or, if 0, until browser is restarted.
+session.cookie_lifetime = 0
+
+; The path for which the cookie is valid.
+session.cookie_path = /
+
+; The domain for which the cookie is valid.
+session.cookie_domain =
+
+; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
+session.cookie_httponly =
+
+; Handler used to serialize data. php is the standard serializer of PHP.
+session.serialize_handler = php
+
+; Define the probability that the 'garbage collection' process is started
+; on every session initialization.
+; The probability is calculated by using gc_probability/gc_divisor,
+; e.g. 1/100 means there is a 1% chance that the GC process starts
+; on each request.
+
+session.gc_probability = 1
+session.gc_divisor = 1000
+
+; After this number of seconds, stored data will be seen as 'garbage' and
+; cleaned up by the garbage collection process.
+session.gc_maxlifetime = 1440
+
+; NOTE: If you are using the subdirectory option for storing session files
+; (see session.save_path above), then garbage collection does *not*
+; happen automatically. You will need to do your own garbage
+; collection through a shell script, cron entry, or some other method.
+; For example, the following script would is the equivalent of
+; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
+; cd /path/to/sessions; find -cmin +24 | xargs rm
+
+; PHP 4.2 and less have an undocumented feature/bug that allows you to
+; to initialize a session variable in the global scope, albeit register_globals
+; is disabled. PHP 4.3 and later will warn you, if this feature is used.
+; You can disable the feature and the warning separately. At this time,
+; the warning is only displayed, if bug_compat_42 is enabled.
+
+session.bug_compat_42 = 0
+session.bug_compat_warn = 1
+
+; Check HTTP Referer to invalidate externally stored URLs containing ids.
+; HTTP_REFERER has to contain this substring for the session to be
+; considered as valid.
+session.referer_check =
+
+; How many bytes to read from the file.
+session.entropy_length = 0
+
+; Specified here to create the session id.
+session.entropy_file =
+
+;session.entropy_length = 16
+
+;session.entropy_file = /dev/urandom
+
+; Set to {nocache,private,public,} to determine HTTP caching aspects
+; or leave this empty to avoid sending anti-caching headers.
+session.cache_limiter = nocache
+
+; Document expires after n minutes.
+session.cache_expire = 180
+
+; trans sid support is disabled by default.
+; Use of trans sid may risk your users security.
+; Use this option with caution.
+; - User may send URL contains active session ID
+; to other person via. email/irc/etc.
+; - URL that contains active session ID may be stored
+; in publically accessible computer.
+; - User may access your site with the same session ID
+; always using URL stored in browser's history or bookmarks.
+session.use_trans_sid = 0
+
+; Select a hash function
+; 0: MD5 (128 bits)
+; 1: SHA-1 (160 bits)
+session.hash_function = 0
+
+; Define how many bits are stored in each character when converting
+; the binary hash data to something readable.
+;
+; 4 bits: 0-9, a-f
+; 5 bits: 0-9, a-v
+; 6 bits: 0-9, a-z, A-Z, "-", ","
+session.hash_bits_per_character = 5
+
+; The URL rewriter will look for URLs in a defined set of HTML tags.
+; form/fieldset are special; if you include them here, the rewriter will
+; add a hidden <input> field with the info which is otherwise appended
+; to URLs. If you want XHTML conformity, remove the form entry.
+; Note that all valid entries require a "=", even if no value follows.
+url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+[MSSQL]
+; Allow or prevent persistent links.
+mssql.allow_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+mssql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+mssql.max_links = -1
+
+; Minimum error severity to display.
+mssql.min_error_severity = 10
+
+; Minimum message severity to display.
+mssql.min_message_severity = 10
+
+; Compatibility mode with old versions of PHP 3.0.
+mssql.compatability_mode = Off
+
+; Connect timeout
+;mssql.connect_timeout = 5
+
+; Query timeout
+;mssql.timeout = 60
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textlimit = 4096
+
+; Valid range 0 - 2147483647. Default = 4096.
+;mssql.textsize = 4096
+
+; Limits the number of records in each batch. 0 = all records in one batch.
+;mssql.batchsize = 0
+
+; Specify how datetime and datetim4 columns are returned
+; On => Returns data converted to SQL server settings
+; Off => Returns values as YYYY-MM-DD hh:mm:ss
+;mssql.datetimeconvert = On
+
+; Use NT authentication when connecting to the server
+mssql.secure_connection = Off
+
+; Specify max number of processes. -1 = library default
+; msdlib defaults to 25
+; FreeTDS defaults to 4096
+;mssql.max_procs = -1
+
+; Specify client character set.
+; If empty or not set the client charset from freetds.comf is used
+; This is only used when compiled with FreeTDS
+;mssql.charset = "ISO-8859-1"
+
+[Assertion]
+; Assert(expr); active by default.
+;assert.active = On
+
+; Issue a PHP warning for each failed assertion.
+;assert.warning = On
+
+; Don't bail out by default.
+;assert.bail = Off
+
+; User-function to be called if an assertion fails.
+;assert.callback = 0
+
+; Eval the expression with current error_reporting(). Set to true if you want
+; error_reporting(0) around the eval().
+;assert.quiet_eval = 0
+
+[COM]
+; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
+;com.typelib_file =
+; allow Distributed-COM calls
+;com.allow_dcom = true
+; autoregister constants of a components typlib on com_load()
+;com.autoregister_typelib = true
+; register constants casesensitive
+;com.autoregister_casesensitive = false
+; show warnings on duplicate constant registrations
+;com.autoregister_verbose = true
+
+[mbstring]
+; language for internal character representation.
+;mbstring.language = Japanese
+
+; internal/script encoding.
+; Some encoding cannot work as internal encoding.
+; (e.g. SJIS, BIG5, ISO-2022-*)
+;mbstring.internal_encoding = EUC-JP
+
+; http input encoding.
+;mbstring.http_input = auto
+
+; http output encoding. mb_output_handler must be
+; registered as output buffer to function
+;mbstring.http_output = SJIS
+
+; enable automatic encoding translation according to
+; mbstring.internal_encoding setting. Input chars are
+; converted to internal encoding by setting this to On.
+; Note: Do _not_ use automatic encoding translation for
+; portable libs/applications.
+;mbstring.encoding_translation = Off
+
+; automatic encoding detection order.
+; auto means
+;mbstring.detect_order = auto
+
+; substitute_character used when character cannot be converted
+; one from another
+;mbstring.substitute_character = none;
+
+; overload(replace) single byte functions by mbstring functions.
+; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
+; etc. Possible values are 0,1,2,4 or combination of them.
+; For example, 7 for overload everything.
+; 0: No overload
+; 1: Overload mail() function
+; 2: Overload str*() functions
+; 4: Overload ereg*() functions
+;mbstring.func_overload = 0
+
+; enable strict encoding detection.
+;mbstring.strict_encoding = Off
+
+[FrontBase]
+;fbsql.allow_persistent = On
+;fbsql.autocommit = On
+;fbsql.show_timestamp_decimals = Off
+;fbsql.default_database =
+;fbsql.default_database_password =
+;fbsql.default_host =
+;fbsql.default_password =
+;fbsql.default_user = "_SYSTEM"
+;fbsql.generate_warnings = Off
+;fbsql.max_connections = 128
+;fbsql.max_links = 128
+;fbsql.max_persistent = -1
+;fbsql.max_results = 128
+
+[gd]
+; Tell the jpeg decode to libjpeg warnings and try to create
+; a gd image. The warning will then be displayed as notices
+; disabled by default
+;gd.jpeg_ignore_warning = 0
+
+[exif]
+; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
+; With mbstring support this will automatically be converted into the encoding
+; given by corresponding encode setting. When empty mbstring.internal_encoding
+; is used. For the decode settings you can distinguish between motorola and
+; intel byte order. A decode setting cannot be empty.
+;exif.encode_unicode = ISO-8859-15
+;exif.decode_unicode_motorola = UCS-2BE
+;exif.decode_unicode_intel = UCS-2LE
+;exif.encode_jis =
+;exif.decode_jis_motorola = JIS
+;exif.decode_jis_intel = JIS
+
+[Tidy]
+; The path to a default tidy configuration file to use when using tidy
+;tidy.default_config = /usr/local/lib/php/default.tcfg
+
+; Should tidy clean and repair output automatically?
+; WARNING: Do not use this option if you are generating non-html content
+; such as dynamic images
+tidy.clean_output = Off
+
+[soap]
+; Enables or disables WSDL caching feature.
+soap.wsdl_cache_enabled=1
+; Sets the directory name where SOAP extension will put cache files.
+soap.wsdl_cache_dir="/tmp"
+; (time to live) Sets the number of second while cached file will be used
+; instead of original one.
+soap.wsdl_cache_ttl=86400
+
+
+; available extensions
+;
+;extension=bcmath.so
+;extension=bz2.so
+;extension=calendar.so
+;extension=curl.so
+;extension=dba.so
+;extension=dbase.so
+;extension=exif.so
+;extension=ftp.so
+;extension=gd.so
+extension=gettext.so
+;extension=iconv.so
+;extension=imap.so
+extension=json.so
+;extension=ldap.so
+;extension=mcrypt.so
+;extension=mime_magic.so
+extension=mysql.so
+;extension=mysqli.so
+;extension=ncurses.so
+;extension=odbc.so
+;extension=openssl.so
+;extension=pdo.so
+;extension=pdo_mysql.so
+;extension=pdo_odbc.so
+;extension=pdo_pgsql.so
+;extension=pdo_sqlite.so
+;extension=pgsql.so
+extension=posix.so
+;extension=pspell.so
+extension=session.so
+;extension=shmop.so
+;extension=snmp.so
+;extension=soap.so
+;extension=sockets.so
+;extension=sqlite.so
+;extension=sysvmsg.so
+;extension=sysvsem.so
+;extension=sysvshm.so
+;extension=tidy.so
+;extension=xmlrpc.so
+;extension=xsl.so
+;extension=zip.so
+extension=zlib.so
+
+
+; Local Variables:
+; tab-width: 4
+; End: