diff options
Diffstat (limited to 'abs/core/system-templates/templates/remotes/common')
| -rw-r--r-- | abs/core/system-templates/templates/remotes/common/MX-500-jams/lircd.conf.MX-500-JAMS | 115 | ||||
| -rw-r--r-- | abs/core/system-templates/templates/remotes/common/MX-500-jams/lircrc | 832 | ||||
| -rw-r--r-- | abs/core/system-templates/templates/remotes/common/MX-500-jams/preview.jpg | bin | 10473 -> 0 bytes | |||
| -rw-r--r-- | abs/core/system-templates/templates/remotes/common/mceusb/lircd.conf.mceusb | 163 | ||||
| -rw-r--r-- | abs/core/system-templates/templates/remotes/common/mceusb/lircrc-mceusb | 877 | ||||
| -rw-r--r-- | abs/core/system-templates/templates/remotes/common/mceusb/preview.jpg | bin | 12551 -> 0 bytes | |||
| -rw-r--r-- | abs/core/system-templates/templates/remotes/common/no_remote/preview.jpg | bin | 3087 -> 0 bytes | |||
| -rw-r--r-- | abs/core/system-templates/templates/remotes/common/streamzap/lircd.conf.streamzap | 72 | ||||
| -rwxr-xr-x | abs/core/system-templates/templates/remotes/common/streamzap/lircrc | 832 | ||||
| -rw-r--r-- | abs/core/system-templates/templates/remotes/common/streamzap/preview.jpg | bin | 83195 -> 0 bytes |
10 files changed, 0 insertions, 2891 deletions
diff --git a/abs/core/system-templates/templates/remotes/common/MX-500-jams/lircd.conf.MX-500-JAMS b/abs/core/system-templates/templates/remotes/common/MX-500-jams/lircd.conf.MX-500-JAMS deleted file mode 100644 index b76d32c..0000000 --- a/abs/core/system-templates/templates/remotes/common/MX-500-jams/lircd.conf.MX-500-JAMS +++ /dev/null @@ -1,115 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005 -# -# contributed by Christoph Bartelmus -# -# brand: Streamzap -# model no. of remote control: PC Remote -# devices being controlled by this remote: USB receiver -# - -begin remote - - name Streamzap_PC_Remote - bits 6 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 889 889 - zero 889 889 - plead 889 - pre_data_bits 8 - pre_data 0xA3 - gap 108344 - toggle_bit 2 - - - begin codes - 0 0x00 - 1 0x01 - 2 0x02 - 3 0x03 - 4 0x04 - 5 0x05 - 6 0x06 - 7 0x07 - 8 0x08 - 9 0x09 - POWER 0x0A - MUTE 0x0B - CH_UP 0x0C - VOL_UP 0x0D - CH_DOWN 0x0E - VOL_DOWN 0x0F - UP 0x10 - LEFT 0x11 - OK 0x12 - RIGHT 0x13 - DOWN 0x14 - MENU 0x15 - EXIT 0x16 - PLAY 0x17 - PAUSE 0x18 - STOP 0x19 - |<< 0x1A - >>| 0x1B - RECORD 0x1C - << 0x1D - >> 0x1E - RED 0x20 - GREEN 0x21 - YELLOW 0x22 - BLUE 0x23 - end codes - -end remote - - - -# Please make this file available to others -# by sending it to <lirc@bartelmus.de> -# -# this config file was automatically generated -# using lirc-0.7.2(streamzap) on Mon Dec 5 08:45:02 2005 -# -# contributed by -# -# brand: RS_LD_120-MX500 -# model no. of remote control: -# devices being controlled by this remote: -# - -begin remote - - name RS_LD - bits 15 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - one 384 1920 - zero 384 896 - ptrail 384 - gap 70400 - min_repeat 2 - toggle_bit 0 - - - begin codes - RESET 0x19FD - TIME 0X1902 - BLANK 0X1B02 - PICTURE 0X1882 - ASPECT 0X1A82 - BROWSE 0X1982 - DELETE 0X1B82 - CARD 0X1842 - CARD_SOURCE 0X1A42 - SPARE1 0X1942 - end codes - -end remote - - diff --git a/abs/core/system-templates/templates/remotes/common/MX-500-jams/lircrc b/abs/core/system-templates/templates/remotes/common/MX-500-jams/lircrc deleted file mode 100644 index 5e668b5..0000000 --- a/abs/core/system-templates/templates/remotes/common/MX-500-jams/lircrc +++ /dev/null @@ -1,832 +0,0 @@ -# StreamZap Remote -# 'config' must either be a literal key, e.g. 'config = l' or must -# refer to a defined key in MythTV, e.g. 'config = PLAY'a - - -#restart frontend -begin - remote = RS_LD - button = RESET - prog = irexec - repeat = 0 - config = /usr/bin/restartfrontend.sh -end - -#time -begin - remote = RS_LD - button = TIME - prog = irexec - repeat = 10 - config = /usr/bin/saytime.sh -end - -#screen blank -begin - remote = RS_LD - button = BLANK - prog = irexec - repeat = 0 -# config = ls - config = xset s activate ; xset s blank -end - - -#picture -begin -REMOTE = RS_LD -prog = mythtv -button = PICTURE -repeat = 4 -config = f -end - -#change aspect -begin -remote = RS_LD -prog = mythtv -button = ASPECT -# change aspect ratio -config = w -end - -#Browse -begin -remote = RS_LD -prog = mythtv -button = BROWSE -repeat = 8 -config = o -end - -# delete key -begin -remote = RS_LD -prog = mythtv -button = DELETE -repeat = 8 -config = d -end - - -#change card -begin -remote = RS_LD -prog = mythtv -button = CARD -repeat = 8 -config = y -end - -# Change TV card input -begin -remote = RS_LD -prog = mythtv -button = CARD_SOURCE -repeat = 4 -config = C -end - - - -# Cycle through channel history -begin -remote = Streamzap_PC_Remote -prog = mythtv -button = BLUE -repeat = 4 -config = H -end - -# Bring up OSD info -begin -remote = Streamzap_PC_Remote -prog = mythtv -button = YELLOW -repeat = 4 -config = i -end - - - - -begin -prog = mythtv -button = 0 -config = 0 -end - -begin -prog = mythtv -button = 1 -config = 1 -end - -begin -prog = mythtv -button = 2 -config = 2 -end - -begin -prog = mythtv -button = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -config = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -end - -begin -prog = mythtv -button = 7 -config = 7 -end - -begin -prog = mythtv -button = 8 -config = 8 -end - -begin -prog = mythtv -button = 9 -config = 9 -end - -begin -prog = mythtv -button = POWER -config = Esc -end - -# ??? -begin -prog = mythtv -button = MUTE -config = F9 -end - -begin -prog = mythtv -button = CH_UP -repeat = 3 -config = PgUp -end - -begin -prog = mythtv -button = VOL_UP -repeat = 3 -config = ] -end - -begin -prog = mythtv -button = CH_DOWN -repeat = 3 -config = PgDown -end - -begin -prog = mythtv -button = VOL_DOWN -repeat = 3 -config = [ -end - -begin -prog = mythtv -button = UP -repeat = 3 -config = Up -end - -begin -prog = mythtv -button = LEFT -# navigates, or skips back during playback or live tv. -config = Left -end - -begin -prog = mythtv -button = OK -config = Return -end - -begin -prog = mythtv -button = RIGHT -# navigates, or skips forwards during playback or live tv. -config = Right -end - -begin -prog = mythtv -button = DOWN -repeat = 3 -config = Down -end - -begin -prog = mythtv -button = MENU -config = m -end - -begin -prog = mythtv -button = EXIT -config = Esc -end - -begin -prog = mythtv -button = PLAY -config = Space -end - -begin -prog = mythtv -button = PAUSE -config = p -end - -begin -prog = mythtv -button = STOP -config = Esc -end - -begin -prog = mythtv -# skip backward -button = |<< -config = PgUp -end - -begin -prog = mythtv -# skip forward -button = >>| -config = PgDown -end - -begin -prog = mythtv -button = RECORD -config = r -end - -begin -prog = mythtv -# rewind -button = << -config = Home -end - -begin -prog = mythtv -# fast forward -button = >> -config = End -end - -begin -prog = mythtv -button = RED -# Delete -config = d -end - -begin -prog = mythtv -button = GREEN -# Info -config = i -end - -#begin -#prog = mythtv -#button = YELLOW -# change aspect ratio -#config = w -#end - -begin -prog = mythtv -button = BLUE -config = Tab -end - -# MPLAYER -begin -prog = mplayer -button = POWER -config = quit -end - -begin -prog = mplayer -button = MUTE -config = mute -end - -begin -prog = mplayer -button = VOL_UP -repeat = 3 -config = volume +1 -end - -begin -prog = mplayer -button = VOL_DOWN -repeat = 3 -config = volume -1 -end - -begin -prog = mplayer -button = UP -repeat = 3 -config = seek +10 -end - -begin -prog = mplayer -button = LEFT -# navigates, or skips back during playback or live tv. -config = seek -60 -end - -begin -prog = mplayer -button = RIGHT -# navigates, or skips forwards during playback or live tv. -config = seek +60 -end - -begin -prog = mplayer -button = DOWN -repeat = 3 -config = seek -10 -end - -begin -prog = mplayer -button = EXIT -config = quit -end - -begin -prog = mplayer -button = play -config = speed_set 1.0 -end - -begin - prog = mplayer - button = pause - config = pause -end - -begin -prog = mplayer -button = STOP -config = quit -end - -begin -prog = mplayer -# skip backward -button = |<< -config = seek -600 -end - -begin -prog = mplayer -# skip forward -button = >>| -config = seek +600 -end - -begin -prog = mplayer -# slow forward -button = << -config = speed_mult 0.5 -end - -begin -prog = mplayer -# fast forward -button = >> -config = speed_mult 2.0 -end - -### xine commands - -begin -prog = xine -button = YELLOW -repeat = 4 -#config = ToggleVisiblity -config = OSDStreamInfos -end - -begin -prog = xine -button = MENU -repeat = 4 -config = SeekRelative+60 -end - -# increase brightness by 10 -begin - button = DELETE - prog = xine - repeat = 4 - config = BrightnessControl+ -end - -# decrease brightness by 10 -begin - button = PICTURE - prog = xine - repeat = 4 - config = BrightnessControl- -end - - -begin -prog = xine -button = PAUSE -repeat = 4 -config = Pause -end - -begin -prog = xine -button = PLAY -repeat = 4 -config = Play -end - -begin -prog = xine -button = STOP -repeat = 4 -config = quit -end - -begin -prog = xine -button = MUTE -repeat = 4 -config = mute -end - -begin -prog = xine -button = << -repeat = 4 -config = SeekRelative-30 -end - -begin -prog = xine -button = >> -repeat = 4 -#config = SeekRelative+30 -config = SpeedFaster -end - -begin -prog = xine -button = POWER -repeat = 4 -config = quit -end - -begin -prog = xine -button = EXIT -repeat = 4 -config = quit -end - - -begin -prog = xine -button = FREEZE -repeat = 4 -config = SeekRelative+1200 -end - -begin -prog = xine -button = MOVE -repeat = 4 -config = SeekRelative-1200 -end - -begin -prog = xine -button = 3 -config = SpuNext -repeat = 0 -end - -# Select previous sub picture (subtitle) channel. -begin -button = 1 -prog = xine -repeat = 0 -config = SpuPrior -end - -# Select next audio channel. -begin -button = 9 -prog = xine -repeat = 0 -config = AudioChannelNext -end - -# Select previous audio channel. -begin -button = 7 -prog = xine -repeat = 0 -config = AudioChannelPrior -end - - - -# Up event. -begin - -button = UP -prog = xine -repeat = 8 -config = EventUp -end - -# Down event. -begin - -button = DOWN -prog = xine -repeat = 8 -config = EventDown -end - -# Left event. -begin - -button = LEFT -prog = xine -repeat = 8 -config = EventLeft -end - -# Right event. -begin - -button = RIGHT -prog = xine -repeat = 8 -config = EventRight -end - -# Select event. -begin -prog = xine -button = ok -repeat = 8 -config = EventSelect -end - -# Down Chapter -begin - -button = CH_DOWN -prog = xine -repeat = 8 -config = EventPrior -end - -# Next Chapter. -begin - -button = CH_UP -prog = xine -repeat = 8 -config = EventNext -end - -# menu. -begin - -button = record -prog = xine -repeat = 8 -config = RootMenu -end - -# Toggle aspect ratio -begin -prog = xine -button = ASPECT -repeat = 0 -config = ToggleAspectRatio -end - - - -#######xmms -begin xmms - begin - prog = xmms - button = PLAY - config = PLAY - end - begin - prog = xmms - button = clear - config = PLAYLIST_CLEAR - end - begin - prog = xmms - button = load - config = PLAYLIST_ADD .xmms/xmms.m3u - end - begin - prog = xmms - button = PAUSE - config = PAUSE - end - begin - prog = xmms - button = STOP - config = STOP - end - begin - prog = xmms - button = EXIT - config = QUIT - flags = mode - end - - begin - prog = xmms - button = POWER - config = QUIT - flags = mode - end - - begin - prog = xmms - button = CH_UP - config = NEXT - end - begin - prog = xmms - button = CH_DOWN - config = PREV - end - - - -begin - prog = xmms - button = >>| - config = NEXT - end -begin - prog = xmms - button = |<< - config = PREV -end - - -begin - prog = xmms - button = << - config = FWD 10 - repeat = 2 - end - begin - prog = xmms - button = << - config = BWD 10 - repeat = 2 - end - begin - prog = xmms - button = volup - config = VOL_UP 10 - repeat = 2 - end - begin - prog = xmms - button = voldown - config = VOL_DOWN 10 - repeat = 2 - end - begin - prog = xmms - button = 1 - config = ONE - end - begin - prog = xmms - button = 2 - config = TWO - end - begin - prog = xmms - button = 3 - config = THREE - end - begin - prog = xmms - button = 4 - config = FOUR - end - begin - prog = xmms - button = 5 - config = FIVE - end - begin - prog = xmms - button = 6 - config = SIX - end - begin - prog = xmms - button = 7 - config = SEVEN - end - begin - prog = xmms - button = 8 - config = EIGHT - end - begin - prog = xmms - button = 9 - config = NINE - end - begin - prog = xmms - button = 0 - config = ZERO - end - begin - prog = xmms - button = enter - config = SETPOS - end -end xmms - -# - - - - - - - - - - - - - - - - - - - diff --git a/abs/core/system-templates/templates/remotes/common/MX-500-jams/preview.jpg b/abs/core/system-templates/templates/remotes/common/MX-500-jams/preview.jpg Binary files differdeleted file mode 100644 index 38857f9..0000000 --- a/abs/core/system-templates/templates/remotes/common/MX-500-jams/preview.jpg +++ /dev/null diff --git a/abs/core/system-templates/templates/remotes/common/mceusb/lircd.conf.mceusb b/abs/core/system-templates/templates/remotes/common/mceusb/lircd.conf.mceusb deleted file mode 100644 index b1c26b6..0000000 --- a/abs/core/system-templates/templates/remotes/common/mceusb/lircd.conf.mceusb +++ /dev/null @@ -1,163 +0,0 @@ -# -# RC-6 config file -# -# source: http://home.hccnet.nl/m.majoor/projects__remote_control.htm -# http://home.hccnet.nl/m.majoor/pronto.pdf -# -# used by: Philips -# -######### -# -# Philips Media Center Edition remote control -# For use with the USB MCE ir receiver -# -# Dan Conti dconti|acm.wwu.edu -# -# Updated with codes for MCE 2005 Remote additional buttons -# *, #, Teletext, Red, Green, Yellow & Blue Buttons -# Note: TV power button transmits no code until programmed. -# Updated 12th September 2005 -# Graham Auld - mce|graham.auld.me.uk -# -# Radio, Print, RecTV are only available on the HP Media Center remote control -# - -begin remote - - name mceusb - bits 16 - flags RC6|CONST_LENGTH - eps 30 - aeps 100 - - header 2667 889 - one 444 444 - zero 444 444 - pre_data_bits 21 - pre_data 0x37FF0 - gap 105000 - toggle_bit 22 - rc6_mask 0x100000000 - - begin codes -#-------------------------------------------------------------b9 - Testb90 0x00007b90 - Testb91 0x00007b91 - Testb92 0x00007b92 - Testb93 0x00007b93 - Testb94 0x00007b94 - Testb95 0x00007b95 - Testb96 0x00007b96 - Testb97 0x00007b97 - Testb98 0x00007b98 - Testb99 0x00007b99 - TV????? 0x00007b9a - Messenger 0x00007b9b - Testb9c 0x00007b9c - Testb9d 0x00007b9d - Testb9e 0x00007b9e - Testb9f 0x00007b9f -#-------------------------------------------------------------ba - Testba0 0x00007ba0 - Blue 0x00007ba1 - Yellow 0x00007ba2 - Green 0x00007ba3 - Red 0x00007ba4 - Teletext 0x00007ba5 - Testba6 0x00007ba6 - Testba7 0x00007ba7 - Testba8 0x00007ba8 - Testba9 0x00007ba9 - Testbaa 0x00007baa - Testbab 0x00007bab - Testbac 0x00007bac - Testbad 0x00007bad - Testbae 0x00007bae - Radio 0x00007baf -#-------------------------------------------------------------bb - Testbb0 0x00007bb0 - Print 0x00007bb1 - Testbb2 0x00007bb2 - Testbb3 0x00007bb3 - Testbb4 0x00007bb4 - Videos 0x00007bb5 - Pictures 0x00007bb6 - RecordedTV 0x00007bb7 - Music 0x00007bb8 - TV 0x00007bb9 - Testbba 0x00007bba - Testbbb 0x00007bbb - Testbbc 0x00007bbc - Testbbd 0x00007bbd - Testbbe 0x00007bbe - Testbbf 0x00007bbf -#-------------------------------------------------------------- bc - Testbc0 0x00007bc0 - Testbc1 0x00007bc1 - Testbc2 0x00007bc2 - Testbc3 0x00007bc3 - Testbc4 0x00007bc4 - Testbc5 0x00007bc5 - Testbc6 0x00007bc6 - Testbc7 0x00007bc7 - Testbc8 0x00007bc8 - Testbc9 0x00007bc9 - Testbca 0x00007bca - Testbcb 0x00007bcb - Testbcc 0x00007bcc - Testbcd 0x00007bcd - Testbce 0x00007bce - Testbcf 0x00007bcf -#---------------------------------------------------------------bd - Testbd0 0x00007bd0 - Testbd1 0x00007bd1 - Testbd2 0x00007bd2 - Testbd3 0x00007bd3 - Testbd4 0x00007bd4 - Testbd5 0x00007bd5 - Testbd6 0x00007bd6 - Testbd7 0x00007bd7 - Testbd8 0x00007bd8 - Guide 0x00007bd9 - LiveTV 0x00007bda - DVDMenu 0x00007bdb - Back 0x00007bdc - OK 0x00007bdd - Right 0x00007bde - Left 0x00007bdf -#--------------------------------------------------------------be - Down 0x00007be0 - Up 0x00007be1 - Star 0x00007be2 - Hash 0x00007be3 - Replay 0x00007be4 - Skip 0x00007be5 - Stop 0x00007be6 - Pause 0x00007be7 - Record 0x00007be8 - Play 0x00007be9 - Rewind 0x00007bea - Forward 0x00007beb - ChannelDown 0x00007bec - ChannelUp 0x00007bed - VolumeDown 0x00007bee - VolumeUp 0x00007bef -#---------------------------------------------------------------bf - More 0x00007bf0 - Mute 0x00007bf1 - Start 0x00007bf2 - Power 0x00007bf3 - Enter 0x00007bf4 - Clear 0x00007bf5 - Nine 0x00007bf6 - Eight 0x00007bf7 - Seven 0x00007bf8 - Six 0x00007bf9 - Five 0x00007bfa - Four 0x00007bfb - Three 0x00007bfc - Two 0x00007bfd - One 0x00007bfe - Zero 0x00007bff - end codes -end remote diff --git a/abs/core/system-templates/templates/remotes/common/mceusb/lircrc-mceusb b/abs/core/system-templates/templates/remotes/common/mceusb/lircrc-mceusb deleted file mode 100644 index a6a8c48..0000000 --- a/abs/core/system-templates/templates/remotes/common/mceusb/lircrc-mceusb +++ /dev/null @@ -1,877 +0,0 @@ -# /home/mythtv/.mythtv/lircrc -# -# From Knoppmyth R5.5 - Copied by UniCav -# -# Media Center Edition Remote Control and -# Remote Control Keys on Media Center Keyboard -# -############################################################################## -# For use with the USB MCE ir receiver -# MythTV LIRC config file for the mceusb2 or lirc_mod_mce module - -# Info about lircrc statment -#begin -# prog = ... Program controlled, irxevent, irexec, mythtv, mplayer, -# xine, or others -# remote = ... mceusb, or what ever you happen to have or want to call it -# button = ... remote keys names from your lircd.conf file -# repeat = ... repeat = 2 is fast, repeat = 4 is slower -# delay = ... delay before repeat, 1 is short, 4 is longer -# config = ... output key presses to key bindings editor -# mode = ... -# flags = ... -#end - -# Test your new Lirc settings -# /etc/init.d/lirc restart To restart Lirc -# ctrl-alt-backspace To restart the frontend - -# Updated January 30th 2008 BAK -# for the Knoppmyth project - -################################### irexec ################################### -# the lirc irexec program must be running for this section - -# Will perform a complete shutdown -#begin -# prog = irexec -# button = Power -# config = /usr/bin/sudo halt -#end - -############################### Mythtv Section ############################### -# MythTV Key Binding Editor location -# Mythtv Menu >>Utilities / Setup >>Edit Keys -# Key Bindings can also be found in Myth Web - -# Record -begin - prog = mythtv - button = Record - config = R -end - -# Stop -begin - prog = mythtv - button = Stop - config = Esc -end - -# Pause -begin - prog = mythtv - button = Pause - config = P -end - -# Rewind (while viewing) -begin - prog = mythtv - button = Rewind - repeat = 0 - delay = 1 - config = < -end - -# Fast forward (while viewing) -begin - prog = mythtv - button = Forward - repeat = 0 - delay = 1 - config = > -end - -# Play -begin - prog = mythtv - button = Play - config = L -end - -# Skip backward (1 min default) -begin - prog = mythtv - button = Replay - repeat = 4 - delay = 4 - config = PgUp -end - -# Skip forward (1 min default) -begin - prog = mythtv - button = Skip - repeat = 4 - delay = 4 - config = PgDown -end - -#<><><><><><><><><><><> Mythtv Control <><><><> - -# Escape/Exit/Back -begin - prog = mythtv - button = Back - config = Esc -end - -# Bring up OSD info -begin - prog = mythtv - button = More - config = I -end - -begin - prog = mythtv - button = Left - repeat = 2 - delay = 4 - config = Left -end - -begin - prog = mythtv - button = Right - repeat = 2 - delay = 4 - config = Right -end - -begin - prog = mythtv - button = Up - repeat = 2 - delay = 4 - config = Up -end - -begin - prog = mythtv - button = Down - repeat = 2 - delay = 4 - config = Down -end - -# OK/Select -begin - prog = mythtv - button = OK - config = Return -end - -# The Start Button is really just a Menu key -begin - prog = mythtv - button = Start - config = M -end - -#<><><><><><><><><><><><><><><> - -# Volume-Up -begin - prog = mythtv - button = VolumeUp - repeat = 1 - config = ] -end - -# Volume-Down -begin - prog = mythtv - button = VolumeDown - repeat = 1 - config = [ -end - -# Mute -begin - prog = mythtv - button = Mute - config = | -end - -# Channel Up -begin - prog = mythtv - button = ChannelUp - repeat = 3 -# delay = 1 - config = Up -end - -# Channel Down -begin - prog = mythtv - button = ChannelDown - config = Down - repeat = 3 -# delay = 1 -end - -# Numbers 0-9 <><><><><><><><><><><> - -begin - prog = mythtv - button = One -# repeat = 2 - config = 1 -end - -begin - prog = mythtv - button = Two -# repeat = 2 - config = 2 -end - -begin - prog = mythtv - button = Three -# repeat = 2 - config = 3 -end - -begin - prog = mythtv - button = Four -# repeat = 2 - config = 4 -end - -begin - prog = mythtv - button = Five -# repeat = 2 - config = 5 -end - -begin - prog = mythtv - button = Six -# repeat = 2 - config = 6 -end - -begin - prog = mythtv - button = Seven -# repeat = 2 - config = 7 -end - -begin - prog = mythtv - button = Eight -# repeat = 2 - config = 8 -End - -begin - prog = mythtv - button = Nine -# repeat = 2 - config = 9 -end - -begin - prog = mythtv - button = Zero -# repeat = 2 - config = 0 -end - -#<><><><><><><><><><><><><><><><><><><><> -# Seek to previous commercial cut point -# or remove all cut points from the Editing Cutlist -begin - prog = mythtv - button = Star - config = Q -end - -# Seek to next commercial cut point -# or add commericial cut points to the Editing Cutlist -begin - prog = mythtv - button = Hash - config = Z -end - -# Brings up the delete box -begin - prog = mythtv - button = Clear - repeat = 0 - config = D -end - -# Toggle Editing Cutlist on or off -begin - prog = mythtv - button = Enter - repeat = 0 - config = E -end - -#<><><><><><><><> Additional Remote Commands <><><><><><><><> -# All buttons in this section must be configured using -# MythTV's KeyBindings JumpPoints editor. -# >>> Utilities/ Setup >>> Edit Keys >>> JumpPoints >>> - -# Listen to Myth Music -begin - prog = mythtv - button = Music - config = Ctrl+Alt+M -end - -# at this time connects to MythStreem -begin - prog = mythtv - button = Radio - config = Ctrl+Alt+S -end - -# View Pictures -begin - prog = mythtv - button = Pictures - config = Ctrl+Alt+P -end - -# Watch Videos -begin - prog = mythtv - button = Videos - config = Ctrl+Alt+V -end - -# Watch Live TV with Live TV Guide open -begin - prog = mythtv - button = TV - config = Ctrl+Alt+K -end - -# Watch Live TV -begin - prog = mythtv - button = LiveTV - config = Ctrl+Alt+L -end - -# Recorded TV Programs -begin - prog = mythtv - button = RecordedTV - config = Ctrl+Alt+R -end - -# Program Guide -begin - prog = mythtv - button = Guide - config = Ctrl+Alt+G -end - -# Play DVD -# There must be a disk in the DVD drive or it dos nothing -begin - prog = mythtv - button = DVDMenu - config = Ctrl+Alt+D -end - -# unused key -#begin -# prog = mythtv -# button = Messenger -# config = Ctrl+Alt+A -#end - -# <><><><><><><><><><><><><> Teletext Buttons <><><><><><><><><><><> - -# Teletext = Show interactive MHEG screens -begin - prog = mythtv - button = Teletext - config = F7 -end - -# Red = Red button for interactive screens. -begin - prog = mythtv - button = Red - config = F2 -end - -# Green = Green button for interactive screens. -begin - prog = mythtv - button = Green - config = F3 -end - -# Yellow = Yellow button for interactive screens. -begin - prog = mythtv - button = Yellow - config = F4 -end - -# Blue = Blue button for interactive screens. -begin - prog = mythtv - button = Blue - config = F5 -end - - -######################## MPlayer Section ##################################### -# "mplayer -input keylist" Prints all keys that can be bound to commands. -# "mplayer -input cmdlist" Prints all commands that can be bound to keys -# "man mplayer" Prints documentation for MPlayer - -# Show OSD -begin - prog = mplayer - button = OK - config = osd -end - -# Pause playback -begin - prog = mplayer - button = Pause - config = pause -end - -# If paused, resume playing -begin - prog = mplayer - button = Play - config = pause -end - -# Stop playback and exit -begin - prog = mplayer - button = Stop - config = quit -end - -# Volume-Up -begin - prog = mplayer - button = VolumeUp - repeat = 2 - config = volume +1 -end - -# Volume-Down -begin - prog = mplayer - button = VolumeDown - repeat = 2 - config = volume -1 -end - -# Mute -begin - prog = mplayer - button = Mute - config = mute -end - -# Seek back 60 seconds -begin - prog = mplayer - button = Left - repeat = 2 - config = seek -60 -end - -# Seek forward 60 seconds -begin - prog = mplayer - button = Right - repeat = 2 - config = seek +60 -end - -# Seek back 10 seconds -begin - prog = mplayer - button = Rewind - repeat = 2 - config = seek -10 -end - -# Seek forward 30 seconds -begin - prog = mplayer - button = Forward - repeat = 2 - config = seek +30 -end - -# Quit -begin - prog = mplayer - button = Back - config = quit -end - -# Seek forward 10 minutes -begin - prog = mplayer - button = Skip - repeat = 2 - config = seek +600 -end - -# Seek backward 10 minutes -begin - prog = mplayer - button = Replay - repeat = 2 - config = seek -600 -end - -# increase brightness -begin - prog = mplayer - button = ChannelUp - repeat = 2 - config = brightness +1 -end - -# decrease brightness -begin - prog = mplayer - button = ChannelDown - repeat = 2 - config = brightness -1 -end - -# Toggle full-screen -#begin -# prog = mplayer -# button = #??????????????????????????? -# repeat = 2 -# config = vo_fullscreen -#end - - -########################## XINE Section ###################################### -# -# For a compleate list of Xine's Lirc Keybindings use comand -# xine --keymap=lirc>.lircrc.xine.keybindings -# This creates a file in current directory called ".lircrc.xine.keybindings" -# Note: Xine has diferent sets of keybindings for lirc and keyboard - -## 01/14/2008 -# xine key bindings. -# Automatically generated by xine-ui version 0.99.6cvs. - -#<><><><><><><><><><> Xine Video Movement <><><><> - -# start playback -begin - prog = xine - button = Play - config = Play -end - -# playback pause toggle -begin - prog = xine - button = Pause - config = Pause -end - -# stop playback -begin - prog = xine - button = Stop - config = Stop -end - -# take a snapshot -#begin -# prog = xine -# button = Record -# repeat = 2 -# config = Snapshot -#end - -begin - prog = xine - button = Forward - repeat = 2 -# delay = 1 - config = SeekRelative+7 -end - -begin - prog = xine - button = Rewind - repeat = 2 -# delay = 1 - config = SeekRelative-7 -end - -# set position to -60 seconds in current stream -begin - prog = xine - button = Replay - repeat = 2 - delay = 1 - config = SeekRelative-60 -end - -# set position to +60 seconds in current stream -begin - prog = xine - button = Skip - repeat = 2 - delay = 1 - config = SeekRelative+60 -end -#<><><><><><><><><><><><>Xine Control<><><><><><><><><> - -# quit the program -begin - prog = xine - button = Back - config = Quit -end - -#display stream information using OSD -begin - prog = xine - button = More - config = OSDStreamInfos -end - -# menu navigate up -begin - prog = xine - button = Up - repeat = 2 - delay = 2 - config = EventUp -end - -# menu navigate down -begin - prog = xine - button = Down - repeat = 2 - delay = 2 - config = EventDown -end - -# menu navigate left -begin - prog = xine - button = Left - repeat = 2 - delay = 2 - config = EventLeft -end - -# menu navigate right -begin - prog = xine - button = Right - repeat = 2 - delay = 2 - config = EventRight -end - -# menu select -begin - prog = xine - button = OK - config = EventSelect -end - -# jump to Root Menu -begin - prog = xine - button = Start - config = Menu -end - -#<><><><><><><><><><><><><><><><><><><> Xine Volume / Channel <><><><><><><><> - -# increment audio volume -begin - prog = xine - button = VolumeUp - repeat = 1 - config = Volume+ -end - -# decrement audio volume -begin - prog = xine - button = VolumeDown - repeat = 1 - config = Volume- -end - -# audio muting toggle -begin - prog = xine - button = Mute - config = Mute -end - -# increase brightness by 10 -begin - prog = xine - button = ChannelUp - config = BrightnessControl+ -end - -# decrease brightness by 10 -begin - prog = xine - button = ChannelDown - config = BrightnessControl- -end - -#<><><><><><><><><><><><><><><><><> Xine Menu <><><><> - -# unused key -#begin -# prog = xine -# button = RecordedTV -# config = ???????? -#end - -# visibility toggle of stream info window -begin - prog = xine - button = Guide - config = SetupShow -end - -# unused key -#begin -# prog = xine -# button = LiveTV -# config = ???????? -#end - -# jump to Title Menu -begin - prog = xine - button = DVDMenu - config = RootMenu -end - -#<><><><><><><><><><><><><><><><><> Xine Stream Position <><><><> - -# set position in current stream - -begin - prog = xine - button = Zero - config = SetPosition0% -end - -begin - prog = xine - button = One - config = SetPosition10% -end - -begin - prog = xine - button = Two - config = SetPosition20% -end - -begin - prog = xine - button = Three - config = SetPosition30% -end - -begin - prog = xine - button = Four - config = SetPosition40% -end - -begin - prog = xine - button = Five - config = SetPosition50% -end - -begin - prog = xine - button = Six - config = SetPosition60% -end - -begin - prog = xine - button = Seven - config = SetPosition70% -end - -begin - prog = xine - button = Eight - config = SetPosition80% -end - -begin - prog = xine - button = Nine - config = SetPosition90% -end - -#<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><> - -# decrement playback speed (slow motion slowdown) -begin - prog = xine - button = Star - config = SpeedSlower -end - -# increment playback speed (slow motion speedup) -begin - prog = xine - button = Hash - config = SpeedFaster -end - -# reset playback speed -begin - prog = xine - button = Clear - config = SpeedReset -end - -# set position to -30 seconds in current stream config = SeekRelative-30 -# set position to +30 seconds in current stream config = SeekRelative+30 -# eject the current medium config = Eject -# zoom in config = ZoomIn -# zoom out config = ZoomOut -# fullscreen toggle config = ToggleFullscreen - -## -# End of xine . -## diff --git a/abs/core/system-templates/templates/remotes/common/mceusb/preview.jpg b/abs/core/system-templates/templates/remotes/common/mceusb/preview.jpg Binary files differdeleted file mode 100644 index 0aa6a4a..0000000 --- a/abs/core/system-templates/templates/remotes/common/mceusb/preview.jpg +++ /dev/null diff --git a/abs/core/system-templates/templates/remotes/common/no_remote/preview.jpg b/abs/core/system-templates/templates/remotes/common/no_remote/preview.jpg Binary files differdeleted file mode 100644 index 1d887dd..0000000 --- a/abs/core/system-templates/templates/remotes/common/no_remote/preview.jpg +++ /dev/null diff --git a/abs/core/system-templates/templates/remotes/common/streamzap/lircd.conf.streamzap b/abs/core/system-templates/templates/remotes/common/streamzap/lircd.conf.streamzap deleted file mode 100644 index 36b52fa..0000000 --- a/abs/core/system-templates/templates/remotes/common/streamzap/lircd.conf.streamzap +++ /dev/null @@ -1,72 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005 -# -# contributed by Christoph Bartelmus -# -# brand: Streamzap -# model no. of remote control: PC Remote -# devices being controlled by this remote: USB receiver -# - -begin remote - - name Streamzap_PC_Remote - bits 6 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 889 889 - zero 889 889 - plead 889 - pre_data_bits 8 - pre_data 0xA3 - gap 108344 - toggle_bit 2 - - - begin codes - 0 0x00 - 1 0x01 - 2 0x02 - 3 0x03 - 4 0x04 - 5 0x05 - 6 0x06 - 7 0x07 - 8 0x08 - 9 0x09 - POWER 0x0A - MUTE 0x0B - CH_UP 0x0C - VOL_UP 0x0D - CH_DOWN 0x0E - VOL_DOWN 0x0F - UP 0x10 - LEFT 0x11 - OK 0x12 - RIGHT 0x13 - DOWN 0x14 - MENU 0x15 - EXIT 0x16 - PLAY 0x17 - PAUSE 0x18 - STOP 0x19 - |<< 0x1A - >>| 0x1B - RECORD 0x1C - << 0x1D - >> 0x1E - RED 0x20 - GREEN 0x21 - YELLOW 0x22 - BLUE 0x23 - DISP 0x24 - PTZ 0x25 - HELP 0x26 - end codes - -end remote - - diff --git a/abs/core/system-templates/templates/remotes/common/streamzap/lircrc b/abs/core/system-templates/templates/remotes/common/streamzap/lircrc deleted file mode 100755 index 5e668b5..0000000 --- a/abs/core/system-templates/templates/remotes/common/streamzap/lircrc +++ /dev/null @@ -1,832 +0,0 @@ -# StreamZap Remote -# 'config' must either be a literal key, e.g. 'config = l' or must -# refer to a defined key in MythTV, e.g. 'config = PLAY'a - - -#restart frontend -begin - remote = RS_LD - button = RESET - prog = irexec - repeat = 0 - config = /usr/bin/restartfrontend.sh -end - -#time -begin - remote = RS_LD - button = TIME - prog = irexec - repeat = 10 - config = /usr/bin/saytime.sh -end - -#screen blank -begin - remote = RS_LD - button = BLANK - prog = irexec - repeat = 0 -# config = ls - config = xset s activate ; xset s blank -end - - -#picture -begin -REMOTE = RS_LD -prog = mythtv -button = PICTURE -repeat = 4 -config = f -end - -#change aspect -begin -remote = RS_LD -prog = mythtv -button = ASPECT -# change aspect ratio -config = w -end - -#Browse -begin -remote = RS_LD -prog = mythtv -button = BROWSE -repeat = 8 -config = o -end - -# delete key -begin -remote = RS_LD -prog = mythtv -button = DELETE -repeat = 8 -config = d -end - - -#change card -begin -remote = RS_LD -prog = mythtv -button = CARD -repeat = 8 -config = y -end - -# Change TV card input -begin -remote = RS_LD -prog = mythtv -button = CARD_SOURCE -repeat = 4 -config = C -end - - - -# Cycle through channel history -begin -remote = Streamzap_PC_Remote -prog = mythtv -button = BLUE -repeat = 4 -config = H -end - -# Bring up OSD info -begin -remote = Streamzap_PC_Remote -prog = mythtv -button = YELLOW -repeat = 4 -config = i -end - - - - -begin -prog = mythtv -button = 0 -config = 0 -end - -begin -prog = mythtv -button = 1 -config = 1 -end - -begin -prog = mythtv -button = 2 -config = 2 -end - -begin -prog = mythtv -button = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -config = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -end - -begin -prog = mythtv -button = 7 -config = 7 -end - -begin -prog = mythtv -button = 8 -config = 8 -end - -begin -prog = mythtv -button = 9 -config = 9 -end - -begin -prog = mythtv -button = POWER -config = Esc -end - -# ??? -begin -prog = mythtv -button = MUTE -config = F9 -end - -begin -prog = mythtv -button = CH_UP -repeat = 3 -config = PgUp -end - -begin -prog = mythtv -button = VOL_UP -repeat = 3 -config = ] -end - -begin -prog = mythtv -button = CH_DOWN -repeat = 3 -config = PgDown -end - -begin -prog = mythtv -button = VOL_DOWN -repeat = 3 -config = [ -end - -begin -prog = mythtv -button = UP -repeat = 3 -config = Up -end - -begin -prog = mythtv -button = LEFT -# navigates, or skips back during playback or live tv. -config = Left -end - -begin -prog = mythtv -button = OK -config = Return -end - -begin -prog = mythtv -button = RIGHT -# navigates, or skips forwards during playback or live tv. -config = Right -end - -begin -prog = mythtv -button = DOWN -repeat = 3 -config = Down -end - -begin -prog = mythtv -button = MENU -config = m -end - -begin -prog = mythtv -button = EXIT -config = Esc -end - -begin -prog = mythtv -button = PLAY -config = Space -end - -begin -prog = mythtv -button = PAUSE -config = p -end - -begin -prog = mythtv -button = STOP -config = Esc -end - -begin -prog = mythtv -# skip backward -button = |<< -config = PgUp -end - -begin -prog = mythtv -# skip forward -button = >>| -config = PgDown -end - -begin -prog = mythtv -button = RECORD -config = r -end - -begin -prog = mythtv -# rewind -button = << -config = Home -end - -begin -prog = mythtv -# fast forward -button = >> -config = End -end - -begin -prog = mythtv -button = RED -# Delete -config = d -end - -begin -prog = mythtv -button = GREEN -# Info -config = i -end - -#begin -#prog = mythtv -#button = YELLOW -# change aspect ratio -#config = w -#end - -begin -prog = mythtv -button = BLUE -config = Tab -end - -# MPLAYER -begin -prog = mplayer -button = POWER -config = quit -end - -begin -prog = mplayer -button = MUTE -config = mute -end - -begin -prog = mplayer -button = VOL_UP -repeat = 3 -config = volume +1 -end - -begin -prog = mplayer -button = VOL_DOWN -repeat = 3 -config = volume -1 -end - -begin -prog = mplayer -button = UP -repeat = 3 -config = seek +10 -end - -begin -prog = mplayer -button = LEFT -# navigates, or skips back during playback or live tv. -config = seek -60 -end - -begin -prog = mplayer -button = RIGHT -# navigates, or skips forwards during playback or live tv. -config = seek +60 -end - -begin -prog = mplayer -button = DOWN -repeat = 3 -config = seek -10 -end - -begin -prog = mplayer -button = EXIT -config = quit -end - -begin -prog = mplayer -button = play -config = speed_set 1.0 -end - -begin - prog = mplayer - button = pause - config = pause -end - -begin -prog = mplayer -button = STOP -config = quit -end - -begin -prog = mplayer -# skip backward -button = |<< -config = seek -600 -end - -begin -prog = mplayer -# skip forward -button = >>| -config = seek +600 -end - -begin -prog = mplayer -# slow forward -button = << -config = speed_mult 0.5 -end - -begin -prog = mplayer -# fast forward -button = >> -config = speed_mult 2.0 -end - -### xine commands - -begin -prog = xine -button = YELLOW -repeat = 4 -#config = ToggleVisiblity -config = OSDStreamInfos -end - -begin -prog = xine -button = MENU -repeat = 4 -config = SeekRelative+60 -end - -# increase brightness by 10 -begin - button = DELETE - prog = xine - repeat = 4 - config = BrightnessControl+ -end - -# decrease brightness by 10 -begin - button = PICTURE - prog = xine - repeat = 4 - config = BrightnessControl- -end - - -begin -prog = xine -button = PAUSE -repeat = 4 -config = Pause -end - -begin -prog = xine -button = PLAY -repeat = 4 -config = Play -end - -begin -prog = xine -button = STOP -repeat = 4 -config = quit -end - -begin -prog = xine -button = MUTE -repeat = 4 -config = mute -end - -begin -prog = xine -button = << -repeat = 4 -config = SeekRelative-30 -end - -begin -prog = xine -button = >> -repeat = 4 -#config = SeekRelative+30 -config = SpeedFaster -end - -begin -prog = xine -button = POWER -repeat = 4 -config = quit -end - -begin -prog = xine -button = EXIT -repeat = 4 -config = quit -end - - -begin -prog = xine -button = FREEZE -repeat = 4 -config = SeekRelative+1200 -end - -begin -prog = xine -button = MOVE -repeat = 4 -config = SeekRelative-1200 -end - -begin -prog = xine -button = 3 -config = SpuNext -repeat = 0 -end - -# Select previous sub picture (subtitle) channel. -begin -button = 1 -prog = xine -repeat = 0 -config = SpuPrior -end - -# Select next audio channel. -begin -button = 9 -prog = xine -repeat = 0 -config = AudioChannelNext -end - -# Select previous audio channel. -begin -button = 7 -prog = xine -repeat = 0 -config = AudioChannelPrior -end - - - -# Up event. -begin - -button = UP -prog = xine -repeat = 8 -config = EventUp -end - -# Down event. -begin - -button = DOWN -prog = xine -repeat = 8 -config = EventDown -end - -# Left event. -begin - -button = LEFT -prog = xine -repeat = 8 -config = EventLeft -end - -# Right event. -begin - -button = RIGHT -prog = xine -repeat = 8 -config = EventRight -end - -# Select event. -begin -prog = xine -button = ok -repeat = 8 -config = EventSelect -end - -# Down Chapter -begin - -button = CH_DOWN -prog = xine -repeat = 8 -config = EventPrior -end - -# Next Chapter. -begin - -button = CH_UP -prog = xine -repeat = 8 -config = EventNext -end - -# menu. -begin - -button = record -prog = xine -repeat = 8 -config = RootMenu -end - -# Toggle aspect ratio -begin -prog = xine -button = ASPECT -repeat = 0 -config = ToggleAspectRatio -end - - - -#######xmms -begin xmms - begin - prog = xmms - button = PLAY - config = PLAY - end - begin - prog = xmms - button = clear - config = PLAYLIST_CLEAR - end - begin - prog = xmms - button = load - config = PLAYLIST_ADD .xmms/xmms.m3u - end - begin - prog = xmms - button = PAUSE - config = PAUSE - end - begin - prog = xmms - button = STOP - config = STOP - end - begin - prog = xmms - button = EXIT - config = QUIT - flags = mode - end - - begin - prog = xmms - button = POWER - config = QUIT - flags = mode - end - - begin - prog = xmms - button = CH_UP - config = NEXT - end - begin - prog = xmms - button = CH_DOWN - config = PREV - end - - - -begin - prog = xmms - button = >>| - config = NEXT - end -begin - prog = xmms - button = |<< - config = PREV -end - - -begin - prog = xmms - button = << - config = FWD 10 - repeat = 2 - end - begin - prog = xmms - button = << - config = BWD 10 - repeat = 2 - end - begin - prog = xmms - button = volup - config = VOL_UP 10 - repeat = 2 - end - begin - prog = xmms - button = voldown - config = VOL_DOWN 10 - repeat = 2 - end - begin - prog = xmms - button = 1 - config = ONE - end - begin - prog = xmms - button = 2 - config = TWO - end - begin - prog = xmms - button = 3 - config = THREE - end - begin - prog = xmms - button = 4 - config = FOUR - end - begin - prog = xmms - button = 5 - config = FIVE - end - begin - prog = xmms - button = 6 - config = SIX - end - begin - prog = xmms - button = 7 - config = SEVEN - end - begin - prog = xmms - button = 8 - config = EIGHT - end - begin - prog = xmms - button = 9 - config = NINE - end - begin - prog = xmms - button = 0 - config = ZERO - end - begin - prog = xmms - button = enter - config = SETPOS - end -end xmms - -# - - - - - - - - - - - - - - - - - - - diff --git a/abs/core/system-templates/templates/remotes/common/streamzap/preview.jpg b/abs/core/system-templates/templates/remotes/common/streamzap/preview.jpg Binary files differdeleted file mode 100644 index 4d1a5fe..0000000 --- a/abs/core/system-templates/templates/remotes/common/streamzap/preview.jpg +++ /dev/null |
