diff options
Diffstat (limited to 'abs/extra/ddclient/ddclient.conf.dynamic.dyndns.sample')
| -rw-r--r-- | abs/extra/ddclient/ddclient.conf.dynamic.dyndns.sample | 162 |
1 files changed, 162 insertions, 0 deletions
diff --git a/abs/extra/ddclient/ddclient.conf.dynamic.dyndns.sample b/abs/extra/ddclient/ddclient.conf.dynamic.dyndns.sample new file mode 100644 index 0000000..a492c8b --- /dev/null +++ b/abs/extra/ddclient/ddclient.conf.dynamic.dyndns.sample @@ -0,0 +1,162 @@ +###################################################################### +## +## $Id: sample-etc_ddclient.conf 102 2008-11-01 11:23:03Z wimpunk $ +## +## Define default global variables with lines like: +## var=value [, var=value]* +## These values will be used for each following host unless overridden +## with a local variable definition. +## +## Define local variables for one or more hosts with: +## var=value [, var=value]* host.and.domain[,host2.and.domain...] +## +## Lines can be continued on the following line by ending the line +## with a \ +## +## +## Warning: not all supported routers or dynamic DNS services +## are mentioned here. +## +###################################################################### +daemon=300 # check every 300 seconds +syslog=yes # log update msgs to syslog +mail=root # mail all msgs to root +mail-failure=root # mail failed update msgs to root +pid=/var/run/ddclient.pid # record PID in file. +ssl=yes # use ssl-support. Works with + # ssl-library +# postscript=script # run script after updating. The + # new IP is added as argument. +# +#use=watchguard-soho, fw=192.168.111.1:80 # via Watchguard's SOHO FW +#use=netopia-r910, fw=192.168.111.1:80 # via Netopia R910 FW +#use=smc-barricade, fw=192.168.123.254:80 # via SMC's Barricade FW +#use=netgear-rt3xx, fw=192.168.0.1:80 # via Netgear's internet FW +#use=linksys, fw=192.168.1.1:80 # via Linksys's internet FW +#use=maxgate-ugate3x00, fw=192.168.0.1:80 # via MaxGate's UGATE-3x00 FW +#use=elsa-lancom-dsl10, fw=10.0.0.254:80 # via ELSA LanCom DSL/10 DSL Router +#use=elsa-lancom-dsl10-ch01, fw=10.0.0.254:80 # via ELSA LanCom DSL/10 DSL Router +#use=elsa-lancom-dsl10-ch02, fw=10.0.0.254:80 # via ELSA LanCom DSL/10 DSL Router +#use=alcatel-stp, fw=10.0.0.138:80 # via Alcatel Speed Touch Pro +#use=xsense-aero, fw=192.168.1.1:80 # via Xsense Aero Router +#use=allnet-1298, fw=192.168.1.1:80 # via AllNet 1298 DSL Router +#use=3com-oc-remote812, fw=192.168.0.254:80 # via 3com OfficeConnect Remote 812 +#use=e-tech, fw=192.168.1.1:80 # via E-tech Router +#use=cayman-3220h, fw=192.168.0.1:1080 # via Cayman 3220-H DSL Router +# +#fw-login=admin, fw-password=XXXXXX # FW login and password +# +## To obtain an IP address from FW status page (using fw-login, fw-password) +#use=fw, fw=192.168.1.254/status.htm, fw-skip='IP Address' # found after IP Address +# +## To obtain an IP address from Web status page (using the proxy if defined) +#use=web, web=checkip.dyndns.org/, web-skip='IP Address' # found after IP Address +# +#use=ip, ip=127.0.0.1 # via static IP's +#use=if, if=eth0 # via interfaces +use=web # via web +# +#protocol=dyndns2 # default protocol +#proxy=fasthttp.sympatico.ca:80 # default proxy +#server=members.dyndns.org # default server +#server=members.dyndns.org:8245 # default server (bypassing proxies) + +login=your-dynamic-dyndns-login # default login +password=your-dynamic-dyndns-password # default password +#mx=mx.for.your.host # default MX +#backupmx=yes|no # host is primary MX? +#wildcard=yes|no # add wildcard CNAME? + +## +## dyndns.org dynamic addresses +## +## (supports variables: wildcard,mx,backupmx) +## +server=members.dyndns.org, \ +protocol=dyndns2 \ +your-dynamic-dyndns-host + +## +## dyndns.org static addresses +## +## (supports variables: wildcard,mx,backupmx) +## +# static=yes, \ +# server=members.dyndns.org, \ +# protocol=dyndns2 \ +# your-static-host.dyndns.org + +## +## +## dyndns.org custom addresses +## +## (supports variables: wildcard,mx,backupmx) +## +# custom=yes, \ +# server=members.dyndns.org, \ +# protocol=dyndns2 \ +# your-domain.top-level,your-other-domain.top-level + +## +## ZoneEdit (zoneedit.com) +## +# server=dynamic.zoneedit.com, \ +# protocol=zoneedit1, \ +# login=your-zoneedit-login, \ +# password=your-zoneedit-password \ +# your.any.domain,your-2nd.any.dom + +## +## EasyDNS (easydns.com) +## +# server=members.easydns.com, \ +# protocol=easydns, \ +# login=your-easydns-login, \ +# password=your-easydns-password \ +# your.any.domain,your-2nd.any.domain + +## +## Hammernode (hn.org) dynamic addresses +## +# server=dup.hn.org, \ +# protocol=hammernode1, \ +# login=your-hn-login, \ +# password=your-hn-password \ +# your-hn-host.hn.org,your-2nd-hn-host.hn.org + +## +## dslreports.com dynamic-host monitoring +## +# server=members.dslreports.com \ +# protocol=dslreports1, \ +# login=dslreports-login, \ +# password=dslreports-password \ +# dslreports-unique-id + +## +## OrgDNS.org account-configuration +## +# use=web, web=members.orgdns.org/nic/ip +# server=www.orgdns.org \ +# protocol=dyndns2 \ +# login=yourLoginName \ +# password=yourPassword \ +# yourSubdomain.orgdns.org + +## +## dnspark.com +## (supports variables: mx, mxpri) +## +# use=web, web=ipdetect.dnspark.com, web-skip='Current Address:' +# protocol=dnspark, \ +# server=www.dnspark.com, \ +# your-host.dnspark.com + +## +## NameCheap (namecheap.com) +## +# protocol=namecheap, \ +# server=dynamicdns.park-your-domain.com, \ +# login=my-namecheap.com-login, \ +# password=my-namecheap.com-password \ +# myhost.namecheap.com |