diff options
Diffstat (limited to 'abs/mv-core/MythVantage-config/templates/ncidd.conf.template')
| -rw-r--r-- | abs/mv-core/MythVantage-config/templates/ncidd.conf.template | 143 |
1 files changed, 0 insertions, 143 deletions
diff --git a/abs/mv-core/MythVantage-config/templates/ncidd.conf.template b/abs/mv-core/MythVantage-config/templates/ncidd.conf.template deleted file mode 100644 index daa2e79..0000000 --- a/abs/mv-core/MythVantage-config/templates/ncidd.conf.template +++ /dev/null @@ -1,143 +0,0 @@ -# ncid - Network CallerID Server Config File - -################################ -# Definitions and Line formats # -################################ - -# lines can be blank, or start with the words: send, set # -# -# A line is divided into words, separated by spaces -# -# A word is either a string of non-blank characters, everything -# between double quotes, or an equal sign. -# -# SEND LINE FORMAT: -# send DATATYPE [DATATYPE] ... -# where DATATYPE = cidlog, cidinfo -# -# SET LINE FORMAT: -# set ITEM = VALUE [ITEM = VALUE] ... -# where ITEM = cidalias, cidlog, datalog, initcid, initstr, -# lockfile, port, ttyclocal, ttyport, ttyspeed, -# nomodem - -############################ -# Log and Info for Clients # -############################ - -# Send the call log to a client when connected -# The default is not to send the call log file -send cidlog - -# Send call info (LINE and RING) to a client at each ring -# The default is not to send the call info line -send cidinfo - -############################ -# NCID Communications Port # -############################ - -# The default TCP/IP port is 3333 - set port = 3333 - -####################### -# Alias and Log Files # -####################### - -# The default CID alias file: /etc/ncid/ncidd.alias -# set cidalias = /etc/ncid/ncidd.alias - -# The default CID call log file: /var/log/cidcall.log -# the log file must exist, ncidd will not create it -# (also make the change in /etc/logrotate.d/ncidd -# and also /etc/ncid/ncidrotate.conf) -# set cidlog = /var/log/cidcall.log - -# The default tty data log file: /var/log/ciddata.log -# the log file must exist, ncidd will not create it -# (also make the change in /etc/logrotate.d/ncidd -# and also /etc/ncid/ncidrotate.conf) -# set datalog = /var/log/ciddata.log - -##################### -# TTY Configuration # -##################### - -# The default tty port: /dev/modem -# set ttyport = /dev/cu.modem # Macintosh OS X - set ttyport = /dev/ttyS1 - -# The default tty port speed: 19200 -# The tty speed can be one of: 38400, 19200, 9600, 4800 -# set ttyspeed = 4800 # NetCallerID port speed - -# Ignore tty control signals for internal modems and 3 wire serial cables -# Disable tty control signals: ttyclocal = 1 -# Enable tty control signals: ttyclocal = 0 (default) -# set ttyclocal = 1 - -# The lockfile name is generated automatically -# If tty port is /dev/modem, lockfile is: /var/lock/LCK..modem -# set lockfile = /var/lock/LCK..ttyS0 - -##################### -# Modem or No Modem # -##################### - -# Obtain CallerID from a CID device or a modem -# device: nomodem = 1 (do not send AT commands) -# modem: nomodem = 0 (default - send AT commands) -# set nomodem = 1 - -######################## -# Modem Initialization # -######################## - -# The default modem initialization is: "AT Z S0=0 E1 V1 Q0" -# set initstr = "ATE1V1Q0" -# -# Alternate modem initialization string -# set initstr = "AT&FE1V1Q0+VIP" - -# Addon strings to set modem for Distinctive Ring: -# http://www.modemsite.com/56k/dring.asp -# -# 3Com/USR/TI chipset: ATS41=1 -# Reported Ring Codes: RING A, RING B, RING C -# Rockwell/Conexant chipset: AT-SDR=7 -# Reported Ring Codes: RING 1, RING 2, RING 3 -# Lucent/Agere chipset: AT+VDR=1,0 -# Reported DROF/DRON messages: DRON=5 DROF=11, DRON=5 DROF=34 -# -# Example adds 3Com DR to the default modem initialization -# set initstr = "ATE1V1Q0S41=1" - -# The default for ncidd is to try two CID strings to setup -# CallerID: "AT+VCID=1" and if that fails: "AT#CID=1". -# set initcid = "AT#CID=1" -# -# Alternate CID strings to try if default does not work: -# set initcid = "AT+FCLASS=8;+VCID=1" -# set initcid = "AT-STE=1;+VCID=1" -# set initcid = "AT-STE=1;#CID=1" - -################# -# TiVo Settings # -################# -# set ttyclocal = 1 # TiVo requires CLOCAL -# set ttyport = /dev/ttyS1 # TiVo Modem Port -# set lockfile = /var/tmp/modemlock # needed for TiVo Modem Port -# -# To use a modem on the TiVo serial port -# Tivo (stereo mini jack) -> -# -> (stereo mini plug) TiVo serial cable (9-pin male) -> -# -> (9-pin Female) PC modem cable (25-pin Male -> -# -> (25-pin Female) Modem -# if the modem has switches, disable DTR -# Use this string to set the modem before attaching it to the TiVo: -# AT&F0&D0&B1&W -# -# set ttyport = /dev/ttyS3 # TiVo Serial Port -# -# End TiVo Settings - |